2. DS18
  3. V2HL.V2

DS18 V2HL.V2 User manual

  • Hello! I've reviewed the datasheet for the DS18 V2HL.V2. This document describes a 2-channel smart line output converter with a speaker emulator. It provides detailed specifications, features, and dimensions. I am ready to answer your questions about this device.
  • What is the input power capacity of the V2HL.V2?
    What is the output voltage of the V2HL.V2?
    What is the remote output voltage?
    What is the frequency response of the V2HL.V2?
FEATURES:
• 2CH smart line-output converter
• 2CH high level input 2CH RCA output
• Surface mount component technology
• Lowest impedance and best power filter
• FR4 double sides PC board
• Remote trigger output with signal sensing
• Power LED indicator to show working status
• Speaker emulator to enable signal output from
some OEM amplifiers with speaker sensor
SPECIFICATIONS:
Input: Up to 55W
Output: Up to 8V
Remote Output Generate: 12 Volt
Frequency Response: 10Hz-30KHz
Input Impedance: 20K ohm
Standby Current: 200mA
Dimensions: 65.8mm L x 57mm W x 24.2mm H
2.58” x 2.24” x 0.95”
Smart Line Output Conversion with Speaker Emulator
V2HL.V2 V2HL.V2
V2HL.V2
V2HL.V2
Smart Line Output Conversion
with Speaker Emulator
2 Channels
SPEAKER
OUTPUT
RADIO
INSTALLATION
AMPLIFIER
INPUT
RCA
REMOTE OUT
GROUND
REM OUT
GND
R- R+ L- L+
Power LED indicator to
show working status
/