Sorbus WD-2TR-GRW, -2TR-GRW Grey Rustic Wood Decorative Wall Shelves User manual

Hello! I've reviewed the assembly instructions for the SORBUS 2-Tier Wall Shelf. This document will guide you through the installation process, from using the template to finally placing your shelves. I'm ready to answer any questions you might have about the steps, required tools, or components involved in the assembly.
What tools are required for assembly?

What is the first step in the assembly process?

How many wall mounts are included in the package?

Thank you for your purchase. Please

reference assembly instructions before use.

Make sure all parts are present and place

them side by side for easy identiﬁcation.

2-Tier Wall Shelf

Assembly Instructions

Package Contents:

4PCS

2PCS

A B E

Step 2: Drill holes in desired installation space, then gently insert

wall anchors (E) with hammer.

Step 1: Place template (C) against wall and secure with tape (D)

make sure it is level. Mark the place where you want the shelf to

be installed or drill holes through template.

Step 4: Safely place one of the shelves (A)

into the top location.

Step 5: Place the remaining shelf (A) into

place. Make sure shelf is secure before

use. Add your favorite decorative item(s)

and enjoy!

Step 3: Place wall mount (B) over holes,

then insert screws (F) into position.

Tools Required: (Not Included): Level, Drill, Hammer, Screwdriver

Shelf Wall Mount

1PC

2PCS

CTemplate

DTape

Wall Anchor

Screw

3 4 5