2. Monogram
  3. FORGE02PACK
FORGE02PACK

Monogram FORGE02PACK User guide

  • Hello! I've reviewed the Forge Quick Start Guide and I am ready to assist you. This document outlines how to properly use the heated ice press to smoothly create sphere ice. Please feel free to ask any questions about the pressing process or other features of the device.
  • Where is the power button located?
    What should I use to center the ice gem in the mold?
    When should I remove the top of the press?
Quick Start Guide
FORGE HEATED ICE PRESS
49-9000024 GEA 03-21
Press the power button
located on the back side
to activate the press.
Lift the top half of the press,
center the ice gem in the
sphere ice mold using the ice
tongs, and replace the top of
the ice press.
Allow the Forge to press ice
until the top half of the press
meets the bottom half of the
press. Remove the top of the
press immediately when
pressing is complete.
Serve with your favorite
spirit, or place into your
freezer for storage and
future use.
Using the ice tongs, remove
the ice sphere from the
bottom of the press.
Quick Start Guide
FORGE HEATED ICE PRESS
/