MGC QBB-6001 User manual

MGC
Brand
MGC
Model
QBB-6001
Type
User manual

MGC QBB-6001 is a surface-mounted expansion audio enclosure designed for secure and efficient housing of audio equipment. Its rugged construction and versatile features make it ideal for various applications:

  • Customizable Design: The QBB-6001 allows you to install modules after mechanical installation and wiring, ensuring flexibility and ease of maintenance.

  • Secure Mounting: With four designated mounting holes and knockouts for conduit entry, the enclosure provides a secure and organized installation process.

  • Grounding Provision: The earth-ground point ensures proper grounding, meeting safety and regulatory requirements.

MGC QBB-6001 is a surface-mounted expansion audio enclosure designed for secure and efficient housing of audio equipment. Its rugged construction and versatile features make it ideal for various applications:

  • Customizable Design: The QBB-6001 allows you to install modules after mechanical installation and wiring, ensuring flexibility and ease of maintenance.

  • Secure Mounting: With four designated mounting holes and knockouts for conduit entry, the enclosure provides a secure and organized installation process.

  • Grounding Provision: The earth-ground point ensures proper grounding, meeting safety and regulatory requirements.

LT-6692 Rev 0 July 2022 Page 1 of 3
QBB-6001
Expansion Audio Enclosure
Installation Instructions
Installing the QBB-6001 Expansion Audio Enclosure
The QBB-6001 expansion audio cabinet is surface mounted. The QBB-6001 consists of the backbox and door.
Install all cabinets and enclosures empty. Pull all required wiring in through the conduit holes provided (must be
punched out). Do not mount the modules until mechanical installation is complete and all wires have been fed into
the cabinets and enclosures.
Figure 1: QBB-6001 Dimensions, Mounting Holes and Knockouts for Installation
Note: It is extremely important to connect the audio cabinet’s earth-ground point (chassis
ground) to the earth ground. Conduits should be brought in only through the
knockouts provided in the backbox.
45.9”
22.4”
44.3”
9”
7.6”
20”
16”
40.2”
4 Mounting Holes as shown
i
LT-6692 Rev 0 July 2022 Page 2 of 3
Attach Mircom Label to Door
You can install the door so that it opens either way: left to right, or right to left. There are six holes in the door so you
can attach the metal Mircom label to either side, depending on how the door is installed.
Figure 2: Holes for the Mircom Label
1. Remove the adhesive backing from the metal Mircom label.
2. Attach the label to the bottom of the door by sliding the studs on the label through the holes.
3. From the inside of the door, use pliers to push the washers on to the studs. Push the flat sides of the washers
against the door.
Figure 3: Attach the Mircom Label to the Door
Position of the
Mircom label when
the door is installed
with hinges on the
left
Holes for the
Mircom label when
the door is installed
with hinges on the
right
Push washers on
the label studs
with the at side
against the door
Inside of door
LT-6692 Rev 0 July 2022 Page 3 of 3
Attach Warning Label to Door
To comply with CAN/ULC-S527, attach the included warning label to the door over the keyhole, as shown below.
Figure 4: Attach the Warning Label to the Door
Align the label over the keyhole
Door
Warning label
  • Page 1 1
  • Page 2 2
  • Page 3 3

MGC QBB-6001 User manual

MGC
Brand
MGC
Model
QBB-6001
Type
User manual

MGC QBB-6001 is a surface-mounted expansion audio enclosure designed for secure and efficient housing of audio equipment. Its rugged construction and versatile features make it ideal for various applications:

  • Customizable Design: The QBB-6001 allows you to install modules after mechanical installation and wiring, ensuring flexibility and ease of maintenance.

  • Secure Mounting: With four designated mounting holes and knockouts for conduit entry, the enclosure provides a secure and organized installation process.

  • Grounding Provision: The earth-ground point ensures proper grounding, meeting safety and regulatory requirements.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents