Fuse Holder ANL 300A Bulk MC10
Part # 778-ANL-B
Overview Physical Specs Tech Data Marketing
Resources
Radiused ends improve cable routing options
ANL: 300 Amp and 750 Amp surface mount options, innovative new 750 Amp through-bulkhead mount holder
(Patent pending)
ANL: for use with 5/16" (8mm) or 3/8" (10mm) ANL fuses
Providing high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to
20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics
technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse
holders' durable construction allow fuses to run at maximum load.
BEP Catalog
BEP
40-42 Apollo Drive
Albany, Auckland 0632
New Zealand
+64 9 415 7261
Terms & Conditions
CZone
Accessibility
Products
Markets
Resources
About
News
Privacy Policy
Contact
Fuse Holder ANL 300A Bulk MC10
778-ANL-B
© 1996 - 2019 BEP Marine. All rights reserved. Legal Notice: all of the information and data on this site is for informational purposes only and is provided for the convenience of the user. Some information
and data on may contain errors or inaccuracies, or there may be omissions, due to human error, technology issues or otherwise. In addition, the information and data on this site may change at any time.
See official legal notice page for details. California Transparency Supply Chain Act
DISTRIBUTOR LOCATOR ENGLISH
Home CZone NEW Products Markets Resources About News Brands Contact
Home / Products / Connectors and Insulators / Pro Installer Fuse Holders / Fuse Holder ANL 300A Bulk MC10
Downloaded from Arrow.com.
/
