Dongguan Maijia Intelligent Technology ZKG30A User manual

Brand: Dongguan Maijia Intelligent Technology

Model: ZKG30A

Type: User manual

Dongguan Maijia Intelligent Technology ZKG30A is a smart Wi-Fi breaker that allows you to control your home lighting remotely using a mobile app. It requires a neutral wire for stable power supply and features manual override for added convenience. The device enables you to set schedules, create scenes, and pair it with other smart devices for automation. It operates on a 2.4GHz Wi-Fi network and supports voice control through compatible virtual assistants. ZKG30A enhances your home's convenience and energy efficiency by providing smart lighting control.

Tech support Feb 2021

User Manual

Installation for Wi-Fi Breaker

Model: ZKG30A

Nov 2021

Content

1. Power off the main breaker .................................................................................................................. 1

2. Find Neutral Wires. ................................................................................................................................. 1

3. Connect wires according the marks on the switch. ...................................................................... 2

Figure 1 - Identify neutral wires .............................................................................................................................. 1

Figure 2 - Wiring Label for Smart Breaker ............................................................................................................ 2

User Manual – Installation for Single Pole Wi-Fi Switches

Model: ZKG30A

Tech support P a g e | 1 of 2 Nov 2021

https://www.martinjerry.com/support

1. Power off the main breaker

2. Find Neutral Wires.

This smart breaker needs neutral wire connected for stable power supply for it’s own wifi chip.

So, please find the neutral wire in the box

Figure 1 - Identify neutral wires

User Manual – Installation for Single Pole Wi-Fi Switches

Model: ZKG30A

Tech support P a g e | 2 of 2 Nov 2021

https://www.martinjerry.com/support

3. Connect wires according the marks on the switch.

Figure 2 - Wiring Label for Smart Breaker

Notice:

1. Three lines must be connected (Live Line, Load Line and Neutral Line);

2. If you really cannot find out a Neutral Line STOP installing the switch and consult with a professional

electrician or contact our service team.

3. After correct wiring, the switch must work well manually. Then, go to pair the switch on App.

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modiﬁcations to this device not explicitly approved by manufacturer

could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1)This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm

between the radiator and your body.

Dongguan Maijia Intelligent Technology ZKG30A User manual

Dongguan Maijia Intelligent Technology ZKG30A User manual

Dongguan Maijia Intelligent Technology ZKG30A User manual

Other documents