Runleader XBI003BM60AA User manual

Brand
Runleader
Model
XBI003BM60AA
Type
User manual

Runleader XBI003BM60AA is a versatile battery indicator, hour meter, and Bluetooth controller for motorcycles. It features a clear LED display showing battery voltage, percentage, and operating status. The device connects to your smartphone via Bluetooth, allowing you to use the "Moresee" app to set function parameters, view usage history, and receive notifications. With its compact size, IP67 waterproof rating, and customizable settings, the XBI003BM60AA is a valuable tool for monitoring and managing your motorcycle's battery and electrical system.

Runleader XBI003BM60AA is a versatile battery indicator, hour meter, and Bluetooth controller for motorcycles. It features a clear LED display showing battery voltage, percentage, and operating status. The device connects to your smartphone via Bluetooth, allowing you to use the "Moresee" app to set function parameters, view usage history, and receive notifications. With its compact size, IP67 waterproof rating, and customizable settings, the XBI003BM60AA is a valuable tool for monitoring and managing your motorcycle's battery and electrical system.

4.Official Download
http://www.runleader.com
3. QR Code Download:
Scan the official QR
code of "Moresee" with
the mobile phone to
download and install.
Find the "Moresee" QR
code on the official website
"DOWNLOAD" to scan,
download and install.
Product Connection
Bluetooth binding method:
Product Function Settings
FCC warning:
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment.
This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) this device must accept any interference received, including
interference that may cause undesired operation.
a) Turn on the Bluetooth function of your mobile phone, open the app
to add a device, look for nearby devices and find the product you
are connected to.
b)The product in the correct state of power connection, the LED
displays the current battery voltage gear, click the icon after
selecting the desired product through the APP search, and then
wait for 5 seconds the APP interface is automatically bound
successfully, and automatically jump to the APP interface "Start
use", which means that the Bluetooth connection is successful.
Motorcycle
花园农场
Device name
Choose device place
Start to use
Help
https://www.runleader.com/index.php/
product/info/225.html
Binding
Please avold powering off the device during the binding
process,and keep the phone close to the device
【Notice】
APP Installation
Four ways to download:
1. IOS APP Download:
Search "Moresee" in
"App Store" to download
and install
15:53 49
5G
Moresee
Moresee ×Cancel
Utilities
OPEN
2. Android Download:
Search "Moresee" in
"Google Play Store"
to download and install.
49
15:53 5G
Moresee
Runleader
Rated for 3+
3
Install
Please read and understand the following notices carefully,
and correctly install and operate the product before using.
1. Please refer to the installation and function instructions in the
APP operation manual to avoid damage caused by installation
errors.
2. If instrument failure or malfunction may cause personal injury or
material damage, use additional safety measures such as limit
switches, guards, etc.
3. Do not pull the wire when using to avoid falling off or poor
contact.
4. Please install the product in an appropriate location to avoid this
product being hit and prevent damage to the product.
5. This product is waterproof to some extent, but can not be used in
deep water or long-term immersion in rain water.
6. Please use this product at the specified temperature, the high
temperature environment may cause damage to the product.
Home
ALL
No device
Add device
Add manually Devices nearby
can’t find devices to add?View help
Motorcycle
BATTERY VOLT
Conected succeeded
Motorcycle
BATTERY VOLT
Conected succeeded
APP Operating Instruction
Battery indicator & Hour meter &
Bluetooth Controller
or
Firmuware upgrade
Reset
Feedback
Help
Mac: 01:B9:FE:00:01:15
XBI003BM60AA
057455122682
Technical support
Remove device
[email protected]
E-mail
？
http://www.runleader.com
Purchase link
Open the APP “Moresee”, click the “ ” icon after the product is
successfully connected, find the “Using Help” and click “Using Help”
to open the Runleader website. Then find the product function
manual, and user can download and refer to the manual to set the
function parameters.
Product DimensionProduct Specification
53.1×31.1×34.8mm
Product Size
Display window size
(Visible)
ITEM NAME
Product model XBI003BM60AA
About 27g
Working current ≤20mA nominal
Product weight
All green - All red -
Multiple(default)
PARAMETERS
LED display mode Full display (default)
Single display
LED color selection
Only fall not rise
Rise or fall
Working mode
Gear by gear discharge
Gear shift discharge
Discharge mode
Up step by step
One-time full charge
Charging mode
Charging gear by gear
0-50000s, default 20s;
One-time full charge
0-50000s, default 20s
Charging delay
Low battery reminder
0-255s; Default 15s
0-255s; Default 15s
10%-60%, Default 10%
Battery type 8 kinds +1 group custom
Voltage range DC 12V 24V 36V 48V
Voltage display
accuracy ±5%, 0.01V
Operating voltage DC 8~65V
Housing material PC545
Waterproof rate IP67
Discharge mode up
Charging mode down
25.5×7.6mm
53.1
Unit:mm
XBI003BM60AA
XBI003BM60AA
31.1
23.2
35.5
17.5
36
R2
24
PANEL
CUT OUT
7.6
25.5 34.8
53.1
Unit:mm
31.1
35.5
17.5
36
R2
24
PANEL
CUT OUT
7.6
25.5
23.2
34.8
  • Page 1 1
  • Page 2 2

Runleader XBI003BM60AA User manual

Brand
Runleader
Model
XBI003BM60AA
Type
User manual

Runleader XBI003BM60AA is a versatile battery indicator, hour meter, and Bluetooth controller for motorcycles. It features a clear LED display showing battery voltage, percentage, and operating status. The device connects to your smartphone via Bluetooth, allowing you to use the "Moresee" app to set function parameters, view usage history, and receive notifications. With its compact size, IP67 waterproof rating, and customizable settings, the XBI003BM60AA is a valuable tool for monitoring and managing your motorcycle's battery and electrical system.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents