KARTENT CHRISTMAS TREE Operating instructions

2x Tree part A

2x Tree part B

1x Peak C

12x Christmas balls D

What’s in the box?

1. Check if all parts are included.

3. Slide the peak (C) into part B.

5. This step is only for the 200 cm tree.

If wanted, secure the lights on the tree

in the noches on the ends of the branches.

4. Slide the christmas balls togerther as indicaded

in the image. Make sure you look for the right

diameter. Hang them in the tree using a string.

Place the plates B on top of each other with

the holes directly above each other, as shown

on the image. Slide the hooks from A into B's

holes and push A down. Do this for both sides.

christmas tree 165 and 200 cm

Caution!

The robe and lights

must be added yourself!