SLAYER SLA1G Operating instructions

Brand: SLAYER

Model: SLA1G

Type: Operating instructions

SLAYER SLA1G, a top-tier espresso machine, offers unparalleled coffee-making capabilities. With its advanced features, you can pull rich, flavorful shots with precise control over temperature, pressure, and flow rate. The machine's sleek design and intuitive interface make it easy to use, allowing you to craft barista-quality beverages right at home. From espresso and lattes to cappuccinos and macchiatos, the SLA1G is ready to elevate your coffee experience to new heights.

SLAYER SLA1G, a top-tier espresso machine, offers unparalleled coffee-making capabilities. With its advanced features, you can pull rich, flavorful shots with precise control over temperature, pressure, and flow rate. The machine's sleek design and intuitive interface make it easy to use, allowing you to craft barista-quality beverages right at home. From espresso and lattes to cappuccinos and macchiatos, the SLA1G is ready to elevate your coffee experience to new heights.

Slayer Special Materials

Care Instructions

WARNING!

Bleach and other harsh chemicals/solvents can discolor or damage the ﬁnish on powder coated, wood, and duratex surfaces

Abrasives - even soft plastic scouring pads - can leave light scratches in powder coating, aluminum, stainless, copper, gold,

wood, duratex surfaces.

POWDER COATING

• Microﬁber towel + mild cleanser,

soap & water

• Denatured alcohol, rubbing alcohol,

or paint-safe degreaser for deep

cleaning/degreasing

• Same as automotive paint care

products

BARE METAL, PLATED, ANODIZED

• Stainless steel, aluminum, chrome,

copper, nickel, 24k gold panels and

components

• Microﬁber towel + Windex to clean

• Meguiar’s Quik Wax (or similar high

quality automotive spray wax) to

polish

•Do not use polish on textured or

anodized surfaces

WOOD FINISH

• Espresso, Single Group, Steam LP

with sapele -steam, hot water, and

brew actuator handles, portafilter

handles, side panels

• Microfiber towel + mild cleanser

(soap & water). Dry immediately!

• Buff with OSMO Polyx-Oil (satin) or

mineral oil to repair scratches or

discoloration

•Do not submerge or leave moisture

on surfaces - dry immediately

•Bleach and other harsh solvents will

discolor and damage finish

ONYX DURATEX

• Steam LP standard configuration-

steam actuators, brew actuators,

portafilter handles

• Microfiber towel + mild cleanser

(soap & water)

• Denatured alcohol or rubbing alcohol

for degreasing

• Buff with mineral oil for scratches or

dull discolored spots

•Bleach and other harsh solvents will

discolor and damage finish

OVERMOLDED RUBBER (NEOPRENE)

• Steam EP - steam actuators,

portaﬁlter handles

• Microﬁber towel + mild cleanser

(soap & water)

•Bleach and other harsh solvents

will degrade neoprene causing it to

erode

P +1 206 284 7171 F +1 206 284 7766 SUPPORT@SLAYERESPRESSO.COM 707 LIND AVE SW, RENTON, WA 98057

SLAYERESPRESSO.COM

May 2022

1

SLAYER SLA1G Operating instructions

Brand: SLAYER

Model: SLA1G

Type: Operating instructions

SLAYER SLA1G, a top-tier espresso machine, offers unparalleled coffee-making capabilities. With its advanced features, you can pull rich, flavorful shots with precise control over temperature, pressure, and flow rate. The machine's sleek design and intuitive interface make it easy to use, allowing you to craft barista-quality beverages right at home. From espresso and lattes to cappuccinos and macchiatos, the SLA1G is ready to elevate your coffee experience to new heights.

Download PDF

Related papers

SLAYER Single Group User manual

Other documents