SamsGazebos BR-E-N-2 Installation guide

Brand
SamsGazebos
Model
BR-E-N-2
Type
Installation guide

This manual is also suitable for

1
SAMSGAZEBOS
○
R
Designer Corbels
Installation Guide
Introducon
Thank you for purchasing SamsGazebos
○
R
products. These instrucons include helpful hints and informaon
necessary to safely install and properly maintain your
corbels for many years of enjoyment. Please read
instrucons completely before you begin. These
corbles have been designed for easy installaon with
nominal effort. If you have any quesons, please
contact SamsGazebos : [email protected]
or (800)376-7267.
How to Install your corbels
1. Place a corbel at a desired posion.
2. Mark minimum two pilot holes with pencil or
pen.
3. Drill smaller pilot holes than your screws.
4. Fasten it with screws. (Alternavely, fasten it with nails .)
5. Finish to your liking.
Tools Required
◊ Cordless screw driver
◊ Drill bit
◊ Screws
◊ Tape Measure
◊ Pencil or pen
◊ Safety Goggles
  • Page 1 1

SamsGazebos BR-E-N-2 Installation guide

Brand
SamsGazebos
Model
BR-E-N-2
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents