2. SMI Ventilation Products
  3. EWM630

SMI Ventilation Products EWM630 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the SMI Ventilation Products EWM630 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
STEP 1:
- Measure your duct opening, not the register or grille.
- Measure left to right for length (L) and top to bottom for width (w).
STEP 2:
- If the existing register is screwed to the wall, use a screwdriver to remove the screws that hold
the register in place.
STEP 3:
- Use supplied screws to install your SMI Vents grille.
(Philips head screwdriver required)
L”
W”
/