Delta 25768LF-OB Dimensions Guide

Type
Dimensions Guide

Delta 25768LF-OB is a two-handle deck mount bathroom faucet with a variety of features that make it a great choice for any bathroom. It has a 1/2"-14 NPSM threaded male inlet shank, and its control mechanism is a rotating cylinder type with a stainless steel plate and 90° rotation. The faucet also has replaceable non-metallic seats and a 1/4 turn handle stop. Additionally, it complies with ASME A112.18.1 / CSA B125.1, ASME A112.18.2 / CSA B125.2, ICC / ANSI A117.1, and EPA WaterSense®.

Delta 25768LF-OB is a two-handle deck mount bathroom faucet with a variety of features that make it a great choice for any bathroom. It has a 1/2"-14 NPSM threaded male inlet shank, and its control mechanism is a rotating cylinder type with a stainless steel plate and 90° rotation. The faucet also has replaceable non-metallic seats and a 1/4 turn handle stop. Additionally, it complies with ASME A112.18.1 / CSA B125.1, ASME A112.18.2 / CSA B125.2, ICC / ANSI A117.1, and EPA WaterSense®.

25768LF
Submitted Model No.:
Designate proper nish sufx
Delta reserves the right (1) to make changes in specications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.deltafaucet.com for nish options and product availability.
DSP-L-25768LF Rev. B
BATHROOM FAUCET
Two Handle Deck Mount
Flynn
TM
Collection
STANDARD SPECIFICATIONS:
• Max low rate 1.2 gpm @ 60 psi, 4.5 L/min @ 414 kPa
• Hot and cold stems are interchangeable
• All operating parts are replaceable from the top
• 1/4 turn handle stops
• 1/2"-14 NPSM threaded male inlet shanks
• Control mechanism is a rotating cylinder type with
stainless steel plate and 90° rotation, with replaceable
non-metallic seats
• Models have drain with plastic pop-up type
itting with
plated
lange and stopper
Specific Features:
8 15/16"
(227 mm)
3 5/8"
(91 mm)
1 3/16"
(30 mm)
Max. Deck
Thickness
4"
(102 mm)
Centers
6 1/4"
(158 mm)
4 1/8"
(104 mm)
5 1/8"
(130 mm)
6 3/8"
(161 mm)
Min. 2 1/2" (64 mm)
Clearance to Back Splash
Recommended
2 1/8"
(54 mm)
2 1/4"
(56 mm)
2 1/8"
(54 mm)
Dia.
1 5/8" (42 mm)
to
2 3/8" (61 mm)
3 1/2"
(89 mm)
4 7/8"
(124 mm)
1 1/4"
(32 mm)
Dia.
1/2"-14 NPSM
COMPLIES WITH:
• ASME A112.18.1 / CSA B125.1
• ASME A112.18.2 / CSA B125.2
Indicates compliance to
ICC / ANSI A117.1
• Veri ied compliant with 0.25% weighted
average Pb content regulations.
• EPA WaterSense
®
3 X 1 1/8"~1 1/2"
(29~38 mm)
Hole Size
Delta Faucet Company
55 E. 111th Street, Indianapolis, IN 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2019 Delta Faucet Company
WARRANTY
Parts and Finish - Lifetime limited warranty; or for
commercial purchasers, 10 years for multi-family
residential (apartments and condominiums) and
5 years for all other commercial uses, in each case
from the date of purchase.
Electronic Parts and Batteries (if applicable) - 5
years from the date of purchase; or for commercial
purchasers, 1 year from the date of purchase. No
warranty is provided on batteries.
  • Page 1 1

Delta 25768LF-OB Dimensions Guide

Type
Dimensions Guide

Delta 25768LF-OB is a two-handle deck mount bathroom faucet with a variety of features that make it a great choice for any bathroom. It has a 1/2"-14 NPSM threaded male inlet shank, and its control mechanism is a rotating cylinder type with a stainless steel plate and 90° rotation. The faucet also has replaceable non-metallic seats and a 1/4 turn handle stop. Additionally, it complies with ASME A112.18.1 / CSA B125.1, ASME A112.18.2 / CSA B125.2, ICC / ANSI A117.1, and EPA WaterSense®.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI