KRAUS C-GVR-204-RE-10CH User manual

C-GVR-204-RE-10CH
Brand
KRAUS
Model
C-GVR-204-RE-10CH
Type
User manual
Glass Vessel Sink
INSTALLATION MANUAL
www.kraususa.com I toll free: 1.800.775.0703 I © 2016 Kraus USA Inc.
Thank you for your purchase
We would like to take this opportunity to thank you for choosing Kraus.
We hope that you are completely satised with your purchase, and enjoy it for years
to come. If you have any questions, or require technical assistance, please contact
us at 800.775.0703 and one of our representatives will be happy to help.
For more information about Kraus products, please visit:
www.kraususa.com
In order to activate your warranty and get faster access to customer support, please
register your new Kraus product at:
www.kraususa.com/registration
Sincerely,
Kraus USA Customer Service
Prior to Installation
• Unpack your new product and ensure that all the parts are contained in the
packaging
• Keep the product in its original box until you’re ready to install it
• The counter top must be at
• Shut o the water supply if replacing a previously-installed vessel sink
• Observe all plumbing and building codes in your area
• It is recommended that installation of the product be done by a professional
plumber
Kraus Glass Vessel Sinks
Specications
• Fashionable bathroom sink is the perfect harmony of elegance and style
• Eye-catching Kraus glass vessel sink will turn an ordinary bathroom into a lavish space
• Sink provides an easy home improvement project
• Sink features polished glass interior and exterior, or polished glass interior and textured
painted exterior
• Designed for above counter installation with standard US plumbing connections
• Certied and Listed by UPC, cUPC, CSA, IAPMO, ANSI and SCC
• Manufactured by Kraus
DIMENSIONS: 14’’ - 17’’
GLASS THICKNESS: 12mm -19mm
DRAIN OPENING: 1.75 in Standard
INSTALLATION: Above Counter
LIMITED LIFETIME WARRANTY
Rough-In Dimensions
Finished Wall
1 3/4” Drain Hole
Vessel Sink
Mounting Ring
Thin Soft Rubber Washer
Pop Up Drain
Concave Washer
Nut
DO NOT OVER TIGHTEN THE DRAIN!!!
Tail Pipe
Firm Washer
Pop Up Drain Top
1 3/4”
Counter Top
(Suggested)
14” - 17”
Countertop
5 1/2”
6”
34” Suggested
28” Suggested
Floor
Mounting Ring 1/2”
Top View
Mounting Ring
White Rubber Washer
Top View
Inner Black Rubber Washer
Bottom View
Installer Tip
Shut o main water supply before installation.
Installation Instructions
Finished Wall
1 3/4” Drain Hole
Vessel Sink
Mounting Ring
Thin Soft Rubber Washer
Pop Up Drain
Concave Washer
Nut
DO NOT OVER TIGHTEN THE DRAIN!!!
Tail Pipe
Firm Washer
Pop Up Drain Top
1 3/4”
Counter Top
(Suggested)
14” - 17”
Countertop
5 1/2”
6”
34” Suggested
28” Suggested
Floor
Mounting Ring 1/2”
Top View
Mounting Ring
White Rubber Washer
Top View
Inner Black Rubber Washer
Bottom View
Before you begin
Prepare counter top by drilling a 1 3/4’’ diameter drain hole at the desired location. Install
mounting ring. Place vessel sink on the mounting ring or counter top as shown below.
1. Make sure the vessel sink is not scratched, chipped or broken prior
to installation.
2. Check to see if your set contains the following parts:
• Vessel sink
• Pop up drain (optional, may be sold separately)
• Mounting Ring (optional, may be sold separately)
3. Locate and place the mounting ring over the drain hole with the
rubber side facing down and the white washer side facing up.
4. Gently set your sink on top of the mounting ring.
Pop Up Drain & Mounting Ring Installation
(ONLY IF INCLUDED)
Finished Wall
1 3/4” Drain Hole
Vessel Sink
Mounting Ring
Thin Soft Rubber Washer
Pop Up Drain
Concave Washer
Nut
DO NOT OVER TIGHTEN THE DRAIN!!!
Tail Pipe
Firm Washer
Pop Up Drain Top
1 3/4”
Counter Top
(Suggested)
14” - 17”
Countertop
5 1/2”
6”
34” Suggested
28” Suggested
Floor
Mounting Ring 1/2”
Top View
Mounting Ring
White Rubber Washer
Top View
Inner Black Rubber Washer
Bottom View
Finished Wall
1 3/4” Drain Hole
Vessel Sink
Mounting Ring
Thin Soft Rubber Washer
Pop Up Drain
Concave Washer
Nut
DO NOT OVER TIGHTEN THE DRAIN!!!
Tail Pipe
Firm Washer
Pop Up Drain Top
1 3/4”
Counter Top
(Suggested)
14” - 17”
Countertop
5 1/2”
6”
34” Suggested
28” Suggested
Floor
Mounting Ring 1/2”
Top View
Mounting Ring
White Rubber Washer
Top View
Inner Black Rubber Washer
Bottom View
Locate and disassemble your pop up drain in the following order:
• Unscrew the tail piece
• Unscrew the brass nut
• Remove the firm washer
• Remove the concave washer, leaving the top thin rubber
washer on.
1. From above the countertop, insert the drain body into the 1 3/4” drain
opening of your sink.
2. From underneath the countertop, insert the concave white rubber
washer onto the drain.
3. Pushing the washer all the way up until it is in contact with the
countertop.
4. Insert the firm washer onto the drain body until it comes into contact
with the concave white rubber washer.
5. Screw the brass nut onto the drain body until it touches the firm
washer.
Finished Wall
1 3/4” Drain Hole
Vessel Sink
Mounting Ring
Thin Soft Rubber Washer
Pop Up Drain
Concave Washer
Nut
DO NOT OVER TIGHTEN THE DRAIN!!!
Tail Pipe
Firm Washer
Pop Up Drain Top
1 3/4”
Counter Top
(Suggested)
14” - 17”
Countertop
5 1/2”
6”
34” Suggested
28” Suggested
Floor
Mounting Ring 1/2”
Top View
Mounting Ring
White Rubber Washer
Top View
Inner Black Rubber Washer
Bottom View
Codes/Standards Applicable:
HELP LINE
Our customer service hours are Monday – Friday, 9am – 8pm EST.
Be sure to visit our website at www.kraususa.com
If you are a HOMEOWNER please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
[email protected]
If you are a PLUMBING CONTRACTOR OR TRADE PROFESSIONAL please contact a Kraus
Pro Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
[email protected]
If you are an AUTHORIZED PARTNER please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com
In requesting warranty service, please be ready to provide:
1. Proof of purchase.
2. A description of the problem.
www.kraususa.com
www.kraususa.com
Scan to Register Onlin e
REGISTER YOUR PRODUCT TODAY
Please take a moment to share your experience.
Visit www.kraususa.com and let us know what you think.
Contact Us To Learn More
1.800.775.0703 / www.kraususa.com / [email protected]
Like & Follow KrausUSA
We’re always looking for ways to improve.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

KRAUS C-GVR-204-RE-10CH User manual

C-GVR-204-RE-10CH
Brand
KRAUS
Model
C-GVR-204-RE-10CH
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents