2. American Standard
  3. 0044000.020

American Standard 0044000.020 Specification

  • Hello! I am an AI chatbot trained to assist you with the American Standard 0044000.020 Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
J83
© 2012 AS America Inc.
BARRIER FREE
RAVENNA
™
SEMI-PEDESTAL SINK
VITREOUS CHINA
RAVENNA™ WALL-HUNG
SEMI-PEDESTAL LAVATORY
• Vitreouschina
• Contemporarydesignwall-hungwith
semi-pedestalP-trapcoverforeaseofcleaning
• Rearoverow
• Soapandaccessorydeck
• Optionalwithintegralmountedtowelbar
(orderedseparately)
• Suppliedwithmountingkit
• Design matched to Ravenna toilets
(faucetshownnotincluded)
• Faucetledgewithgenerousshelfarea
foraccessories
❏ 0268.444Faucetholeson4"(102mm)centers
❏ 0268.888Faucetholeson8"(203mm)centers
(shownonrough)
❏ 0268.144Centerholeonly
Nominal Dimensions:
24-1/4"x20"
(616x508mm)
Bowl sizes:
19-3/8"(492mm)wide
12"(305mm)fronttoback
6"(152mm)deep
Separate Components:
❏ 0268.004Lavatoryslab4"(102mm)centers
❏ 0268.008Lavatoryslab8"(203mm)centers
❏ 0268.001Lavatoryslabcenterholeonly
❏ 0044.000Semi-pedestalleg
Recommended Components:
❏ 3520.000IntegralTowelBar
002Chrome,295SatinNickel
❏ 738520-0070ATowelBarmountingkit
Compliance Certications:
Meets or exceeds the following specications:
•ASMEA112.19.2-2008/CSAB45.1-08
To Be Specied:
❏Color:❏White❏Bone❏Linen❏Black
❏Faucet*:
❏FaucetFinish:
❏Supplies:
❏1-1/4"Trap
*Seefaucetsectionforadditionalmodelsavailable
Revised2/11
SEEREVERSEFORROUGHING-INDIMENSIONS
MEETS THE AMERICANS WITH DISABILITIES ACT
GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
When used without towel bar and top of front rim mounted
864mm (34") from finished floor.
J84
BARRIER FREE
© 2012 AS America Inc.
RAVENNA
™
SEMI-PEDESTAL SINK
VITREOUS CHINA
Revised2/11
NOTES:
DIMENSIONSSHOWNFORLOCATIONOFSUPPLIESAND“P"TRAPARE
SUGGESTED.
PEDESTALANCHORINGSCREWSNOTINCLUDED.
SUITABLEFORREINFORCEMENTONLY.ACTUALDIMENSIONSMUSTBE
TAKENFROMFIXTURE.
FITTINGSNOTINCLUDEDANDMUSTBEORDEREDSEPARATELY.
PROVIDESUITABLEREINFORCEMENTFORALLWALLSUPPORTS.
INSTALLATIONINSTRUCTIONSSUPPLIEDWITHLAVATORY.
IMPORTANT:Dimensionsofxturesarenominalandmayvarywithinthe
rangeoftolerancesestablishedbyANSIStandardA112.19.2.
Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibility
isassumedforuseofsupersededorvoidedpages.
FINISHED
WALL
FINISHED
WALL
34"
(864mm)
18-3/8"
(466mm)
17-5/16"
(440mm)
8-1/4"
(209mm)
7- 3/8"
(187mm)
3-1/8"
(80mm)
3"
(75mm)
1/2"
(13mm)
4-3/4"
(120mm)
1-3/8"
(35mm)
3"
(76mm)
20"
(507mm)
8"
(205mm)
BARRIER FREE
CLEARANCE
8" MIN.
(203mm)
27" MIN.
(686mm)
9" MIN.
(229mm)
6" MAX.
(152mm)
24"
(610mm)
24-1/4"
(615mm)
20-5/16"
(516mm)
19-7/16"
(493mm)
17-7/16"
(443mm)
9"
(230mm)
4-1/4"
(108mm)
4"
(104mm)
24-1/4"
(616mm)
9-1/2"
(241mm)
2"
(51mm)
7/8" (22mm) DIA.
SLAB ANCHOR
SCREW HOLES ON
9-1/2" (241mm) CTRS
34"
(864mm)
14-3/8"
(365mm)
5"
(127mm)
20"
(508mm)
3-1/4"
(83mm)
7- 3/4"
(197mm)
1/2" (13mm) DIA.
SEMI-PED ANCHOR
SCREW HOLES ON
4-1/4" (108mm) CTRS
*21"
(533mm)
2-3/4"
(70mm)
1-1/4" O.D.
WASTE
SUPPLIES AS
REQUIRED
1-1/4" O.D.
TAILPIECE
8-1/4"
(210mm)
FINISHED
FLOOR
FINISHED
WALL
20"
(508mm)
4"
(102mm)
1-3/4" DIA.
STD. DRAIN
OUTLET
SEMI-PED
BASE
TOWEL
RAIL
*24-3/4"
(629mm)
1/2"D.
(13mm)
1-1/4" O.D.
WASTE
SUPPLIES AS
REQUIRED
1-1/4" O.D.
TAILPIECE
1/2"D.
(13mm)
1-3/8"D.
(35mm)
FINISHED
FLOOR
8"
(203mm)
MEETS THE AMERICANS WITH DISABILITIES ACT
GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
When used without towel bar and top of front rim mounted
864mm (34") from finished floor.
0268.888
/