Acrosser Technology AR-N6000 Owner's manual

Brand: Acrosser Technology

Model: AR-N6000

Category: Motherboards

Type: Owner's manual

Revision: 1.1

AR-N6000D41 & AR-N6000D51

System Guide

Revision: 1.1

Contents

1. ...................................................4 Introduction to AR-N6000

1.1. .............................................................................4 Specifications

1.2.

................................................................................4 Packing List

1.3.

.....................................................................5 System Dissection

2. .............................7 Procedures of Assembly/Disassembly

2.1. ...................................................................7 CF Card Installation

2.2.

.................................................................8 SO-DIMM Installation

2.3.

...........................................................9 HDD module Installation

3. .....................................................12 AR-B6000 Board Guide

3.1. ..............................................................................12 Introduction

3.1.1. ...............................................................................................12 Features

3.1.2.

........................................................................................13 Specification

3.1.3.

...............................................................................14 Package Contents

3.1.4.

.....................................................................................15 Block Diagram

3.2. ..............................................................16 Hardware Information

3.2.1. ...............................................................................................16 Location

3.2.1.1. ...........................................................................................................16 Top Side

3.2.1.2. .....................................................................................................17 Bottom Side

3.2.2. ..................................18 Connector, Header and Jumper Setting Table

3.2.2.1. ...........................................................................19 Pin definition for Connector

3.2.2.2. ................................................................................20 Pin definition for Header

3.2.2.3. .................................................................21 Jumper Setting and Pin definition

3.3. .............................................................................22 BIOS Setting

3.3.1. .....................................................................22 Main (System Overview)

3.3.2.

.........................................................22 Advanced (Advanced Settings)

Revision: 1.1

3.3.3. ..........................................................................23 Power (ACPI Setting)

3.3.4.

...........................................................................23 Boot (Boot Settings)

3.3.5.

...............................................................................24 Exit (Exit Options)

3.4. ...................................................................................25 Appendix

3.4.1. .............................................25 Appendix A - RJ45 LAN LED definition

3.4.2.

...................................26 Appendix B- Front Panel LAN LED definition

3.4.3.

...........................................27 Appendix C- Front Panel LED definition

Revision: 1.1

1. Introduction to AR-N6000

Acrosser's Microbox Networking device AR-N6000 is a small, cost-effective and entry-level

solution, which is suitable for small office. Base on Intel ATOM D410 (single core & 512K cache) or

D510 (dual cores & 1M cache) 1.66GHz CPU, the AR-N6000 consumes very low power to save

the total costs. We also put a quiet fan to keep the low noise, which will not cause uncomfortable

voice. By four 10/100/1000Mbps LANs, the AR-N6000 is sufficient for the small business security

hardware solution.

Key features:

1. Intel ATOM D410 or D510 CPU

2. Intel ICH8M Chipsets.

3. DDRII 667/800 SO-DIMM x 1, up to 2GB memory

4. Intel 82574L 10/100/1000Mbps x 4

5. For N6000D51 system, LAN1 and LAN2 support bypass feature

6. CF socket, 2.5” HDD bay x 1, SATA II interface with power x 2

7. Console, VGA (pinhead), USB 2.0 x 4 (2 x connectors, 2 x pin head)

8. Support boot from LAN, console redirection

9. Support mini-PCI for feature expansion

10. Compact size

1.1. Specifications

Item Description

System AR-N6000

CPU Board AR-N6000 series

System Dimensions 242×150.5×40 (mm)

1.2. Packing List

Description Q’ty

AR-N6000 system 1

Console Cable 1

Quick user manual 1

CD with Driver and Manual 1

Power adapter 1

SATA cable 1

SATA power cable 1

USA or Europe or Japan or UK power cord 1

Revision: 1.1

1.3. System Dissection

(1) Dimensions

(2) Front Panel

COM LAN3

Reset LAN4

USB

LAN2

LAN1

Power In

Revision: 1.1

(3) System Configuration

Item Part No. Description Remark

1 170010974-G TOP COVER 1

2 170010972-G BOTTOM 1

3 170010973-G BOTTOM BRACKET 1

4 170010974-G 2.5” HDD BAY 1

5 020010024 or 020010025 AR-B6000D41 or AR-B6000D51 1

6 140060027-G FAN 1

7 180070086-G FRONT PANEL 1

8 180020023-G Shock-proof mat 3

Revision: 1.1

2. Procedures of Assembly/Disassembly

2.1. CF Card Installation

1. Unscrew the five screws of top cover and take it out.

2. Install the CF card into the CF card socket.

INSERT

CF card socket

Revision: 1.1

2.2. SO-DIMM Installation

1. Unscrew the screws of Bottom cover and take it out.

Unscrew the screws

2. Install the SO-DIMM into the socket.

Mini PCIE socket

Install

Revision: 1.1

2.3. HDD module Installation

1. Open the top cover and take it.

HDD_bay

2. Please take 4 rubbers from accessory bag, and paste them following below positions.

Rubber

Install 2.5” HDD to the HDD_bracket and screw the screws to fix it.

Revision: 1.1

Screw

4. Insert SATA cable and SATA power cable to 2.5” HDD.

Revision: 1.1

5. Plug SATA cable and SATA power cable to AR-B6000 board.

SATA power connector

SATA connector

6. Finish the HDD module installation after install top cover.

Revision: 1.1

3. AR-B6000 Board Guide

3.1. Introduction

Welcome to the AR-B6000 series Computer. The AR-B6000 series is a Networking board for

Micro-box and Rack-mount with four sets of GbE LAN. Intel Atom (Pineview-D) D410/D510

+ICH8M.

 AR-B6000D41 is a networking board for micro-box and Rack-mount Platform with Intel Atom

D410 +ICH8M, 4*10/100/1000 LAN.

 AR-B6000D51 is a Networking board for micro-box and Rack-mount Platform with Intel Atom

D510 +ICH8M, 4*10/100/1000 LAN with by-pass.

3.1.1. Features

 Processor:

AR-B6000D41: Intel® Atom™ Processor D410 (Single Core, 512K L2 Cache, 1.66 GHz)

AR-B6000D51: Intel® Atom™ Processor D510 (Dual Core, 2X 512K L2 Cache, 1.66 GHz)

 Chipsets: Intel® ICH8M

 Memory: DDR2 667/800MHz SO-DIMM, Maximum 2GB

 Display: VGA

 Storage: 1x CF, 2x SATA II,

 Communication: 4x Gbps Ethernet, 7x USB 2.0, 3x RS-232, 1x RS-232/422/485

 General: Watchdog timer, 8-bit GPIO, and PCI-104 expansion slot.

Revision: 1.1

3.1.2. Specification

System

CPU AR-B6000D41 Intel® Atom™ Processor D410 (512K L2 Cache, 1.66 GHz)

AR-B6000D51 Intel® Atom™ Processor D510 (2X 512K L2 Cache, 1.66 GHz)

Memory One SO-DIMM socket support 667/800 MHz DDR2 SDRAM up to 2GB

Graphic

Controller

Intel® GMA 3150

Gen3.5+ GFX Core, GFX Render Core Frequency @ 200MHz (400MHz), DX9

Video Memory DVMT 4.0, Maximum 256MB shared

Intel® Dynamic Video Memory Technology support 4.0

Video Interface 1 x VGA port (DB15)

Chipset Intel® ICH8M

Thermal

solution

FAN connector for CPU FAN

Fan connector for system FAN*2

BIOS 1. support console redirection(default enable)

2. support bypass setting(default disable)

3. support boot from LAN

Super I/O W83627DHC

Network Interface

Ethernet 4 *RJ45 JACK with LED (Refer to Appendix A)

Intel 82574L (10/100/1000Mbps) (L1~L4),

LAN by-Pass LAN1 and LAN2 support by-pass function

Reserve 1*3 pin Jumper for Hardware select bypass status.

AR-B6000D51 only

I/O

Front panel From left to right:

1. LAN1/ LAN2/ LAN3/ LAN4 LED: 1000, 10/100, Act. (Refer to Appendix B)

2. Power LED/HDD/Bypass: Green/Green/Yellow (Refer to Appendix C)

Rear panel From left to right:

Power Inlet

2 * USB (use standby power)

COM port (DB9)

LAN4/ LAN3/ LAN2

Reset Button

LAN1

Internal I/O

1. 4 x USB 2.0(2.54 pitch)

Mini-PCI

PCI slot

GPIO:

Use super I/O game port as GPIO

2x5 pin 2.0mm Pin Head

8-bit GPIO, 1 x GND, 1 x 3.3V/5V jumper selectable

LCM pin head( 7-pin pinhead 2.54mm)

Power input (Mini Fit 4 pin Co-lay with power inlet)

1*8 pin 2.54mm reserve for CPLD update

VGA pin head(2*5pin, 2.0mm

Panel connector(2*4pin, 2.54mm)

Storage

Revision: 1.1

CF 1 x Compact Flash socket, Type-II Socket

(Master mode) Support UDMA

SATA 2 x SATAII interface with power(JST 4 pin)

Others

Watchdog Timer Software programmable 1~255 Seconds,

Battery Lithium Battery, 3V 220mAH (CR2032)

Hardware

monitoring

CPU voltage

CPU and System Temperature

OS support Win XP/XP Embedded, Fedora 10(2.6.27)

Mechanical

Dimension 218 x 146mm

Operating

Temperature

0~60°C (32~140°F)

Storage

Temperature

-20~80°C (-4~176°F)

Relative

Humidity

0 to 90% @ 40°C, non-condensing (95% @ 40°C, Non-Condensing by request)

Power Supply N/A

Power

Requirements

12V Single Voltage Input

ATX circuit as AT mode

EMC & Safety

EMC CE, FCC Class B

Safety N/A

3.1.3. Package Contents

Model Name Part Lists QTY Remark

AR-B6000 series 1

AR-B6000

series

Revision: 1.1

3.1.4. Block Diagram

Revision: 1.1

3.2. Hardware Information

This chapter describes the installation of AR-B6000. At first, it shows the Function diagram and

the layout of AR-B6000. It then describes the unpacking information that you should read carefully,

as well as the jumper/switch settings for the AR-B6000 configuration.

3.2.1. Location

3.2.1.1. Top Side

Revision: 1.1

3.2.1.2. Bottom Side

Revision: 1.0

3.2.2. Connector, Header and Jumper Setting Table

Revision: 1.0

3.2.2.1. Pin definition for Connector

Item Connector NAME DESCRIPTION

DC_JACK1

Power Inlet

ATX12V_1

Power input (CO lay with Power inlet)

FAN1 , FAN2, FAN3

FAN connector*3 ( for CPU FAN*1, System FAN*2)

COM2

SATA_PWR1,SATA_PWR2

Revision: 1.0

3.2.2.2. Pin definition for Header

Item HEADER NAME DESCRIPTION

F_PANEL

LCM1

VGA1

GPIO1

USB34,USB56

CPLD_FH

Page is loading ...

Acrosser Technology AR-N6000 Owner's manual

Brand: Acrosser Technology

Model: AR-N6000

Category: Motherboards

Type: Owner's manual

Download PDF

report

Acrosser Technology AR-N6000 Owner's manual

Acrosser Technology AR-N6000 Owner's manual

Related papers

Other documents