Acrosser Technology AR-N6000 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Acrosser Technology AR-N6000 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Revision: 1.1
AR-N6000D41 & AR-N6000D51
System Guide
1
Revision: 1.1
Contents
1. ...................................................4 Introduction to AR-N6000
1.1. .............................................................................4 Specifications
1.2.
................................................................................4 Packing List
1.3.
.....................................................................5 System Dissection
2. .............................7 Procedures of Assembly/Disassembly
2.1. ...................................................................7 CF Card Installation
2.2.
.................................................................8 SO-DIMM Installation
2.3.
...........................................................9 HDD module Installation
3. .....................................................12 AR-B6000 Board Guide
3.1. ..............................................................................12 Introduction
3.1.1. ...............................................................................................12 Features
3.1.2.
........................................................................................13 Specification
3.1.3.
...............................................................................14 Package Contents
3.1.4.
.....................................................................................15 Block Diagram
3.2. ..............................................................16 Hardware Information
3.2.1. ...............................................................................................16 Location
3.2.1.1. ...........................................................................................................16 Top Side
3.2.1.2. .....................................................................................................17 Bottom Side
3.2.2. ..................................18 Connector, Header and Jumper Setting Table
3.2.2.1. ...........................................................................19 Pin definition for Connector
3.2.2.2. ................................................................................20 Pin definition for Header
3.2.2.3. .................................................................21 Jumper Setting and Pin definition
3.3. .............................................................................22 BIOS Setting
3.3.1. .....................................................................22 Main (System Overview)
3.3.2.
.........................................................22 Advanced (Advanced Settings)
2
Revision: 1.1
3.3.3. ..........................................................................23 Power (ACPI Setting)
3.3.4.
...........................................................................23 Boot (Boot Settings)
3.3.5.
...............................................................................24 Exit (Exit Options)
3.4. ...................................................................................25 Appendix
3.4.1. .............................................25 Appendix A - RJ45 LAN LED definition
3.4.2.
...................................26 Appendix B- Front Panel LAN LED definition
3.4.3.
...........................................27 Appendix C- Front Panel LED definition
3
Revision: 1.1
1. Introduction to AR-N6000
Acrosser's Microbox Networking device AR-N6000 is a small, cost-effective and entry-level
solution, which is suitable for small office. Base on Intel ATOM D410 (single core & 512K cache) or
D510 (dual cores & 1M cache) 1.66GHz CPU, the AR-N6000 consumes very low power to save
the total costs. We also put a quiet fan to keep the low noise, which will not cause uncomfortable
voice. By four 10/100/1000Mbps LANs, the AR-N6000 is sufficient for the small business security
hardware solution.
Key features:
1. Intel ATOM D410 or D510 CPU
2. Intel ICH8M Chipsets.
3. DDRII 667/800 SO-DIMM x 1, up to 2GB memory
4. Intel 82574L 10/100/1000Mbps x 4
5. For N6000D51 system, LAN1 and LAN2 support bypass feature
6. CF socket, 2.5” HDD bay x 1, SATA II interface with power x 2
7. Console, VGA (pinhead), USB 2.0 x 4 (2 x connectors, 2 x pin head)
8. Support boot from LAN, console redirection
9. Support mini-PCI for feature expansion
10. Compact size
1.1. Specifications
Item Description
System AR-N6000
CPU Board AR-N6000 series
System Dimensions 242×150.5×40 (mm)
1.2. Packing List
Description Q’ty
AR-N6000 system 1
Console Cable 1
Quick user manual 1
CD with Driver and Manual 1
Power adapter 1
SATA cable 1
SATA power cable 1
USA or Europe or Japan or UK power cord 1
4
Revision: 1.1
1.3. System Dissection
(1) Dimensions
(2) Front Panel
5
COM LAN3
Reset LAN4
USB
LAN2
LAN1
Power In
Revision: 1.1
(3) System Configuration
Item Part No. Description Remark
1 170010974-G TOP COVER 1
2 170010972-G BOTTOM 1
3 170010973-G BOTTOM BRACKET 1
4 170010974-G 2.5” HDD BAY 1
5 020010024 or 020010025 AR-B6000D41 or AR-B6000D51 1
6 140060027-G FAN 1
7 180070086-G FRONT PANEL 1
8 180020023-G Shock-proof mat 3
6
Revision: 1.1
2. Procedures of Assembly/Disassembly
2.1. CF Card Installation
1. Unscrew the five screws of top cover and take it out.
7
2. Install the CF card into the CF card socket.
INSERT
CF card socket
Revision: 1.1
2.2. SO-DIMM Installation
1. Unscrew the screws of Bottom cover and take it out.
Unscrew the screws
2. Install the SO-DIMM into the socket.
Mini PCIE socket
Install
8
Revision: 1.1
2.3. HDD module Installation
1. Open the top cover and take it.
HDD_bay
2. Please take 4 rubbers from accessory bag, and paste them following below positions.
Rubber
3.
Install 2.5” HDD to the HDD_bracket and screw the screws to fix it.
9
Revision: 1.1
Screw
4. Insert SATA cable and SATA power cable to 2.5” HDD.
10
Revision: 1.1
5. Plug SATA cable and SATA power cable to AR-B6000 board.
SATA power connector
SATA connector
6. Finish the HDD module installation after install top cover.
11
Revision: 1.1
12
3. AR-B6000 Board Guide
3.1. Introduction
Welcome to the AR-B6000 series Computer. The AR-B6000 series is a Networking board for
Micro-box and Rack-mount with four sets of GbE LAN. Intel Atom (Pineview-D) D410/D510
+ICH8M.
AR-B6000D41 is a networking board for micro-box and Rack-mount Platform with Intel Atom
D410 +ICH8M, 4*10/100/1000 LAN.
AR-B6000D51 is a Networking board for micro-box and Rack-mount Platform with Intel Atom
D510 +ICH8M, 4*10/100/1000 LAN with by-pass.
3.1.1. Features
Processor:
AR-B6000D41: Intel® Atom™ Processor D410 (Single Core, 512K L2 Cache, 1.66 GHz)
AR-B6000D51: Intel® Atom™ Processor D510 (Dual Core, 2X 512K L2 Cache, 1.66 GHz)
Chipsets: Intel® ICH8M
Memory: DDR2 667/800MHz SO-DIMM, Maximum 2GB
Display: VGA
Storage: 1x CF, 2x SATA II,
Communication: 4x Gbps Ethernet, 7x USB 2.0, 3x RS-232, 1x RS-232/422/485
General: Watchdog timer, 8-bit GPIO, and PCI-104 expansion slot.
Revision: 1.1
3.1.2. Specification
System
CPU AR-B6000D41 Intel® Atom™ Processor D410 (512K L2 Cache, 1.66 GHz)
AR-B6000D51 Intel® Atom™ Processor D510 (2X 512K L2 Cache, 1.66 GHz)
Memory One SO-DIMM socket support 667/800 MHz DDR2 SDRAM up to 2GB
Graphic
Controller
Intel® GMA 3150
Gen3.5+ GFX Core, GFX Render Core Frequency @ 200MHz (400MHz), DX9
Video Memory DVMT 4.0, Maximum 256MB shared
Intel® Dynamic Video Memory Technology support 4.0
Video Interface 1 x VGA port (DB15)
Chipset Intel® ICH8M
Thermal
solution
FAN connector for CPU FAN
Fan connector for system FAN*2
BIOS 1. support console redirection(default enable)
2. support bypass setting(default disable)
3. support boot from LAN
Super I/O W83627DHC
Network Interface
Ethernet 4 *RJ45 JACK with LED (Refer to Appendix A)
Intel 82574L (10/100/1000Mbps) (L1~L4),
LAN by-Pass LAN1 and LAN2 support by-pass function
Reserve 1*3 pin Jumper for Hardware select bypass status.
AR-B6000D51 only
I/O
Front panel From left to right:
1. LAN1/ LAN2/ LAN3/ LAN4 LED: 1000, 10/100, Act. (Refer to Appendix B)
2. Power LED/HDD/Bypass: Green/Green/Yellow (Refer to Appendix C)
Rear panel From left to right:
Power Inlet
2 * USB (use standby power)
COM port (DB9)
LAN4/ LAN3/ LAN2
Reset Button
LAN1
Internal I/O
1. 4 x USB 2.0(2.54 pitch)
Mini-PCI
PCI slot
GPIO:
Use super I/O game port as GPIO
2x5 pin 2.0mm Pin Head
8-bit GPIO, 1 x GND, 1 x 3.3V/5V jumper selectable
LCM pin head( 7-pin pinhead 2.54mm)
Power input (Mini Fit 4 pin Co-lay with power inlet)
1*8 pin 2.54mm reserve for CPLD update
VGA pin head(2*5pin, 2.0mm
Panel connector(2*4pin, 2.54mm)
Storage
13
Revision: 1.1
14
CF 1 x Compact Flash socket, Type-II Socket
(Master mode) Support UDMA
SATA 2 x SATAII interface with power(JST 4 pin)
Others
Watchdog Timer Software programmable 1~255 Seconds,
Battery Lithium Battery, 3V 220mAH (CR2032)
Hardware
monitoring
CPU voltage
CPU and System Temperature
OS support Win XP/XP Embedded, Fedora 10(2.6.27)
Mechanical
Dimension 218 x 146mm
Operating
Temperature
0~60°C (32~140°F)
Storage
Temperature
-20~80°C (-4~176°F)
Relative
Humidity
0 to 90% @ 40°C, non-condensing (95% @ 40°C, Non-Condensing by request)
Power Supply N/A
Power
Requirements
12V Single Voltage Input
ATX circuit as AT mode
EMC & Safety
EMC CE, FCC Class B
Safety N/A
3.1.3. Package Contents
Model Name Part Lists QTY Remark
AR-B6000 series 1
AR-B6000
series
Revision: 1.1
3.1.4. Block Diagram
15
Revision: 1.1
3.2. Hardware Information
This chapter describes the installation of AR-B6000. At first, it shows the Function diagram and
the layout of AR-B6000. It then describes the unpacking information that you should read carefully,
as well as the jumper/switch settings for the AR-B6000 configuration.
3.2.1. Location
3.2.1.1. Top Side
16
Revision: 1.1
3.2.1.2. Bottom Side
17
Revision: 1.0
3.2.2. Connector, Header and Jumper Setting Table
18
Revision: 1.0
3.2.2.1. Pin definition for Connector
Item Connector NAME DESCRIPTION
C1
DC_JACK1
Power Inlet
C2
ATX12V_1
Power input (CO lay with Power inlet)
C3
FAN1 , FAN2, FAN3
FAN connector*3 ( for CPU FAN*1, System FAN*2)
C4
COM2
C5
SATA_PWR1,SATA_PWR2
19
Revision: 1.0
3.2.2.2. Pin definition for Header
Item HEADER NAME DESCRIPTION
H1
F_PANEL
H2
LCM1
H3
VGA1
H4
GPIO1
H5
USB34,USB56
H6
CPLD_FH
20
/