kozy heat #KLS45 Owner's manual

Category
Fireplaces
Type
Owner's manual

Kozyheat #KLS45 is a gas log conversion set designed to be used with Kozy Heat fireplace models 231, 231 ZC, 232, 234, 430, and 432. It features a millivolt board with a 3/8" flexible gas line, 18" long, and is equipped with a safety shut-off switch that automatically turns off the burner in case of a downdraft. The KLS45 comes with a variety of log styles, including a back log, front log, top Y log, top knothole log, top right curved log, and a bark log. It has a BTU input of 45,000 and requires a minimum inlet gas supply pressure of 5.0 inches W.C. for natural gas and 11.0 inches W.C.

Kozyheat #KLS45 is a gas log conversion set designed to be used with Kozy Heat fireplace models 231, 231 ZC, 232, 234, 430, and 432. It features a millivolt board with a 3/8" flexible gas line, 18" long, and is equipped with a safety shut-off switch that automatically turns off the burner in case of a downdraft. The KLS45 comes with a variety of log styles, including a back log, front log, top Y log, top knothole log, top right curved log, and a bark log. It has a BTU input of 45,000 and requires a minimum inlet gas supply pressure of 5.0 inches W.C. for natural gas and 11.0 inches W.C.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

kozy heat #KLS45 Owner's manual

Category
Fireplaces
Type
Owner's manual

Kozyheat #KLS45 is a gas log conversion set designed to be used with Kozy Heat fireplace models 231, 231 ZC, 232, 234, 430, and 432. It features a millivolt board with a 3/8" flexible gas line, 18" long, and is equipped with a safety shut-off switch that automatically turns off the burner in case of a downdraft. The KLS45 comes with a variety of log styles, including a back log, front log, top Y log, top knothole log, top right curved log, and a bark log. It has a BTU input of 45,000 and requires a minimum inlet gas supply pressure of 5.0 inches W.C. for natural gas and 11.0 inches W.C.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI