Oliveri PR1112 is a 1 & 3/4 bowl inset sink with drainer. It's fabricated with 10mm radius corners, Softtone, and soundproofing. The sink is made of 304 grade, 18/10 brushed stainless steel (1.5mm thick). The recommended installation method is inset, and the minimum cabinet size is 1000mm. The grand bowl is 500W x 405H x 225D / 46L, and the 3/4 bowl is 380W x 405H x 225D / 35L. The sink comes with 2 x 90mm square basket wastes, but it does not have an overflow. There is only one tap hole available.
Oliveri PR1112 is a 1 & 3/4 bowl inset sink with drainer. It's fabricated with 10mm radius corners, Softtone, and soundproofing. The sink is made of 304 grade, 18/10 brushed stainless steel (1.5mm thick). The recommended installation method is inset, and the minimum cabinet size is 1000mm. The grand bowl is 500W x 405H x 225D / 46L, and the 3/4 bowl is 380W x 405H x 225D / 35L. The sink comes with 2 x 90mm square basket wastes, but it does not have an overflow. There is only one tap hole available.
-
1
-
2
Oliveri PR1112 is a 1 & 3/4 bowl inset sink with drainer. It's fabricated with 10mm radius corners, Softtone, and soundproofing. The sink is made of 304 grade, 18/10 brushed stainless steel (1.5mm thick). The recommended installation method is inset, and the minimum cabinet size is 1000mm. The grand bowl is 500W x 405H x 225D / 46L, and the 3/4 bowl is 380W x 405H x 225D / 35L. The sink comes with 2 x 90mm square basket wastes, but it does not have an overflow. There is only one tap hole available.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Oliveri ST-BL1550U User manual
-
-
-
-
-
-
-
-
-
