Contents
Unpacking ..................................................................................................................................5
Product Overview ......................................................................................................................6
Front View ............................................................................................................................................................. 6
Top View ................................................................................................................................................................ 6
Rear View ............................................................................................................................................................... 7
LCD Display Window ......................................................................................................................................... 7
Remote Control ..........................................................................................................................8
Remove the Insulating Strip from the Remote Control ..........................................................9
Battery Replacement for the Remote Control .........................................................................9
Handling the Battery ......................................................................................................................................... 9
Handling the Remote Control .....................................................................................................................10
Remote Control Operation Range ..........................................................................................10
Wall Mounting .........................................................................................................................10
Connections .............................................................................................................................11
Mains Power .......................................................................................................................................................11
Using Earphones...............................................................................................................................................11
Playing music from an Audio Device ........................................................................................................12
Playing Music from a USB Device or a Memory Card ..........................................................................12
Compatible Disc Types ............................................................................................................13
Basic Operation .......................................................................................................................13
Powering ON/OFF ............................................................................................................................................13
Selecting Modes ...............................................................................................................................................13
Adjusting the Volume .....................................................................................................................................14
Clock Setting ......................................................................................................................................................14
Timer Clock Setting .........................................................................................................................................14
Sleep Timer Setting .........................................................................................................................................15
EQ Control ...........................................................................................................................................................15
CD / MP3 / WMA Operation .....................................................................................................16
Playback ...............................................................................................................................................................16
To Pause Playback ............................................................................................................................................17
To Stop Playback ...............................................................................................................................................17
Skipping to Another Track ............................................................................................................................17
ID3 Operation (For MP3 / WMA Mode) .....................................................................................................17
Repeat Playback ................................................................................................................................................18
Random Playback .............................................................................................................................................18
Intro Playback ....................................................................................................................................................19
Programmable Playback ................................................................................................................................19
USB Operation .........................................................................................................................20
Memory Card Operation .........................................................................................................21
3
SHFGLC11_IB_110608_Zell.indd 3 08/06/2011 2:03 PM
AUX Operation .........................................................................................................................21
iPod Operation .........................................................................................................................22
Inserting the iPod and Selecting iPod Mode..........................................................................................22
iPod Playback .....................................................................................................................................................23
iPod MENU Mode .............................................................................................................................................24
Charging Your iPhone/iPod ..........................................................................................................................24
FM Operation ...........................................................................................................................25
Searching for a Station Manually ................................................................................................................25
Searching for a Station Automatically ......................................................................................................25
Selecting Mono / Stereo ................................................................................................................................25
Presetting Stations ...........................................................................................................................................26
Tuning in to a Preset Station ........................................................................................................................26
For Better Reception .......................................................................................................................................26
Maintenance ............................................................................................................................27
Handling Discs ...................................................................................................................................................27
Cleaning Discs ...................................................................................................................................................27
Storing Discs ......................................................................................................................................................27
Cleaning the Unit .............................................................................................................................................27
Hints and Tips ..........................................................................................................................28
Specication ............................................................................................................................29
Safety Warnings .......................................................................................................................30
4
SHFGLC11_IB_110608_Zell.indd 4 08/06/2011 2:03 PM
The Main Unit Remote Control
(P.N.: 070-0019LF-01L0)
Instruction Manual
(P.N.: SHFGLC11-001)
Unpacking
Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so
according to local regulations.
The following items are included:
Thank you for purchasing your new Sandstrøm Hi-Fi with Docking for
iPhone and iPod.
We recommend that you spend some time reading this instruction manual in
order that you fully understand all the operational features it oers. You will also
nd some hints and tips to help you resolve any issues.
Read all the safety instructions carefully before use and keep this instruction
manual for future reference.
If items are missing or damaged, please contact Partmaster (UK only).
Tel: 0844 800 3456 for assistance.
ON/OFF
DISPLAY
MODE
MENU
ENTER
FUNCTION
REPEAT
PRESET/FOLDER
TIMER
INTROEQ
RANDOM
SLEEP
MUTE VOLUME
FUNCTION
MODE
ENTER
MENU
SKIP TUNE
SEARCH
5
SHFGLC11_IB_110608_Zell.indd 5 08/06/2011 2:03 PM
Product Overview
Front View
Top View
FUNCTION
MODE
ENTER
MENU
SKIP TUNE
SEARCH
1. Speakers
2. CD/iPod Door
3. LCD Display Window
4. IR Sensor
5. STANDBY Indicator
6. FUNCTION Icon
4
1 2 3
5
6
7
8
9
10
11
7. MODE Icon
8. ENTER Icon
9. MENU Icon
10. SKIP/TUNE SEARCH Icon
11. SKIP/TUNE SEARCH Icon
DISPLAYVOLUMECD OPEN/CLOSEON/OFF iPod OPEN/CLOSE
1. ON/OFF Button
2. CD OPEN/CLOSE Button
3. USB Port
4. MEMORY CARD Port
1 2 3 4 5 6 7
5. VOLUME +/– Buttons
6. DISPLAY Button
7. iPod OPEN/CLOSE Button
6
SHFGLC11_IB_110608_Zell.indd 6 08/06/2011 2:03 PM
Rear View
1. POWER ON/OFF Button
2. Mains Cable
3. FM Aerial
4. Earphones Socket
5. LINE IN Socket
AC~
LINE IN
FM ANT.
21 3 4 5
LCD Display Window
ALBUMINTRO
RANDOM
REPEAT ALL ALBUM
M E M O R Y
K H z
M H z
5
6
4
2 31
1. SLEEP Indicator
2. TIMER Indicator
3. TIMER / RADIO MEMORY
NUMBER Indicator
4. VOLUME LEVELS Indicator
5. STEREO Indicator
6. TRACK / NUMBER / TIME Indicator
7
SHFGLC11_IB_110608_Zell.indd 7 08/06/2011 2:03 PM
Remote Control
ON/OFF
DISPLAY
MODE
MENU
ENTER
FUNCTION
REPEAT
PRESET/FOLDER
TIMER
INTROEQ
RANDOM
SLEEP
MUTE VOLUME
2
6
7
3
5
4
8
9
1
10
13
15
11
12
17
18
14
16
1. ON/OFF Button
2. DISPLAY Button
3. ENTER Button
4. Button
5. MENU Button
6. PRESET/FOLDER Button
7. REPEAT Button
8. EQ Button
9. MUTE Button
10. FUNCTION Button
11. MODE Button
12. Button
13. PRESET/FOLDER Button
14. RANDOM Button
15. TIMER Button
16. INTRO Button
17. SLEEP Button
18. VOLUME +/– Buttons
8
SHFGLC11_IB_110608_Zell.indd 8 08/06/2011 2:03 PM
Remove the Insulating Strip from the Remote Control
Remove the insulating mylar strip from the battery if
the battery is being used for the rst time. It is located
at the bottom back side of the remote control.
Battery Replacement for the Remote Control
The remote control requires a CR2032, 3V Lithium battery.
1. Slide and hold the battery release tab in the
direction of the arrow.
2. Pull out the battery holder and remove the old
battery.
3. Replace with a new one battery.
4. Insert the battery holder back into the remote
control.
Handling the Battery
1. Improper or incorrect use of batteries may cause corrosion or battery leakage, which
could cause re, personal injury or damage to property.
2. Install the battery correctly by following the polarity (+ and –) indications in the battery
compartment.
3. When the battery is exhausted, the remote control will not function.
4. Only use the battery type indicated in this manual.
5. Do not dispose of the used battery as domestic waste. Dispose of it in accordance with
the local regulations.
6. Small button cell batteries such as the one used in the remote control are easily
swallowed by young children and this is dangerous. Keep loose button cells away from
young children and make sure that the battery holder tray is secure in the remote control.
Seek medical advice if you believe a cell has been swallowed.
9
SHFGLC11_IB_110608_Zell.indd 9 08/06/2011 2:03 PM
Handling the Remote Control
• Take care of your ngernails when you press and hold the battery release tab.
• Do not drop or cause impact to the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive heat.
• Remove the battery from the remote control when not in use for a long period of time, as it
could cause corrosion or battery leakage and may result in physical injury and/or property
damage including re.
Remote Control Operation Range
Point the remote control at the unit no more than 5
metres from the remote control sensor and within 60°
of the front of the unit. The operating distance may
vary depending on the brightness of the room.
FUNCTION
MODE
ENTER
MENU
SKIP TUNE
SEARCH
ON/OFF
DISPLAY
MODE
MENU
ENTER
FUNCTION
REPEAT
PRESET/FOLDER
TIMER
INTROEQ
RANDOM
SLEEP
MUTE VOLUME
30° 30°
Within about 5m
Wall Mounting
Fix the two screws (Size: 3.5*25BA) (not included) onto the wall. They should be parallel to each
other. The distance between the two screws should be 140 mm.
Flip the base stand upward and attach the mounting hold to the screws by following the arrow
direction to mount the unit onto the wall.
The wall where the Base stand unit is to be installed must be capable of long-term
support of the total load of the Hi-Fi System unit. Measures should also be taken to
ensure sucient strength to withstand the force of earthquakes, vibrations and other
external forces. Incorrect installation can cause the Hi-Fi System to fall and cause injury.
Mounting
hold
Mounting
hold
Screw
Base
stand
Please mind your ngers when
ipping or adjusting the stand.
10
SHFGLC11_IB_110608_Zell.indd 10 08/06/2011 2:03 PM
Long-term exposure to loud music may cause hearing damage. It if best to avoid
extreme volume when using earphones, especially for extended periods.
Connections
Mains Power
• This unit was designed to operate with an AC 230-240V ~50Hz power supply.
• Connecting the unit to any other power source may cause damage to the unit. Unwind
the mains cable to its full length. Connect the mains plug to a mains socket. Make sure the
mains plug is fully inserted into the mains socket. The unit is now connected and ready to
use.
• To switch the unit o completely, switch the POWER ON/OFF switch to the OFF position or
withdraw the mains plug from the mains socket.
AC~
LINE IN
FM ANT.
Using Earphones
Turn down the volume before connecting the earphones. Slowly raise the volume with the
earphones on until you reach your desired volume. When earphones are connected, the
speaker is automatically muted.
AC~
LINE IN
FM ANT.
Rear Side of the unit
11
SHFGLC11_IB_110608_Zell.indd 11 08/06/2011 2:03 PM
AC~
LINE IN
FM ANT.
Playing music from an Audio Device
The AUX input is located on the rear side of the unit. Use a 3.5mm stereo audio cable (not
included) connect the audio device through the LINE IN socket.
Playing Music from a USB Device or a Memory Card
The USB device and Memory Card ports are located on the top of the unit. Use a USB device
or a SD memory card to insert into the slots.
Rear Side of the unit
Top View of the unit Top View of the unit
3.5mm Stereo
Audio Cable
(Not included)
Audio Device
DISPLAYVOLUMECD OPEN/CLOSEON/OFF iPod OPEN/CLOSE DISPLAYVOLUMECD OPEN/CLOSEON/OFF iPod OPEN/CLOSE
SD
12
SHFGLC11_IB_110608_Zell.indd 12 08/06/2011 2:03 PM
Compatible Disc Types
Disc Types Disc Logo Recorded Content
CD-R (CD Recordable) AUDIO
CD-RW (CD-Rewritable) AUDIO
AUDIO-CD (Compact Disc Digital Audio) AUDIO
Basic Operation
Powering ON/OFF
When you rst connect the unit to the mains socket. Switch the POWER ON/OFF button at the
rear of the unit to the ON position. The unit will be in STANDBY mode.
• Press the ON/OFF button on the unit or on the remote control to switch the unit to Power
ON mode.
• Press the ON/OFF button again to switch the unit to STANDBY mode.
• Disconnect the mains cable from the mains socket if you want to switch the unit o
completely.
Selecting Modes
Tap the FUNCTION Icon on the unit or press the FUNCTION button on the remote control
repeatedly to switch between modes.
CD USB CARD iPod AUX TUNER
Some recorded les may not be able to be played due to the type and format of disc or
condition of the recording.
• If there is no signal when the unit is in CD / USB / CARD mode, the unit will
automatically switch to STANDBY mode in approx. 15 minutes.
• When the unit is in the iPod mode and if there is no iPod in the iPod dock, the unit will
automatically switch to STANDBY mode in approx. 15 minutes.
• While in STANDBY mode, press any button to illuminate the display for about 10
seconds.
• To save energy, turn o the unit by switching the POWER ON/OFF switch at the rear
of the unit to the “OFF” position.
13
SHFGLC11_IB_110608_Zell.indd 13 08/06/2011 2:03 PM
Adjusting the Volume
Press the VOLUME +/– buttons on the unit or the remote control to increase/decrease the
volume.
Press the MUTE button on the remote control to switch the sound o. The volume level will
ash and the audio output will temporarily stop. Press the MUTE button again to resume
audio listening.
Clock Setting
Setting the clock can only be done in STANDBY mode.
When the unit is in STANDBY mode, the STANDBY LED indicator illuminates.
1. In STANDBY mode, Tap and hold the MODE Icon on the unit or press and hold the MODE
button on the remote control until the 24-hour indicator is ashing, then tap the SKIP/
TUNE SEARCH Icons on the unit or press the buttons on the remote
control to select the 12-hour or 24-hour time format on the display.
2. Tap the MODE Icon on the unit or press the MODE button on the remote control to
conrm, then the hour digits will ash.
3. Tap the SKIP/TUNE SEARCH Icons on the unit or press the buttons on the
remote control to adjust the hour digits while ashing. Tap the MODE Icon on the unit
or press the MODE button on the remote control to conrm, then the minute digits will
ash.
4. Tap the SKIP/TUNE SEARCH Icons on the unit or press the buttons on the
remote control to adjust the minute digits while ashing.
5. Tap the MODE Icon on the unit or press the MODE button on the remote control to
conrm the time.
6. Each enable state will be cleared if any buttons are not pressed within 10 seconds.
Timer Clock Setting
Setting the timer clock in STANDBY mode.
1. Press and hold the TIMER button on the remote control until
the “ ON” indicator and “00:00” show on the display and the
hour digits ash.
2. Tap the SKIP/TUNE SEARCH icons on the unit or
press the buttons on the remote control to adjust the
hour digits and then press the TIMER button on the remote
control to conrm. The minute digits will ash.
3. Tap the SKIP/TUNE SEARCH icons on the unit or
press the buttons on the remote control to adjust
the minute digits and then press the TIMER button on the
remote control to conrm the TIMER ON time.
4. After adjusting “TIMER ON”, “ OFF” indicator will show on
the display and the hour digits ash.
5. Tap the SKIP/TUNE SEARCH icons on the unit or
press the buttons on the remote control to adjust the
hours digits and then press the TIMER button on the remote
control. The minute digits will ash.
14
SHFGLC11_IB_110608_Zell.indd 14 08/06/2011 2:03 PM
Sleep Timer Setting
The sleep timer automatically turns the unit o after a certain time.
1. While the unit is on, press the SLEEP button on the remote control to adjust the TUNER /
CD / USB / CARD / iPod / AUX in SLEEP mode.
2. Press the SLEEP button repeatedly to select the desired sleep time as below:
90 80 70 60 50
NORMAL
40 30 20 10
3. After setting a desired sleep time, the “ ” indicator will show on the display.
4. The unit will automatically turn to STANDBY mode once it counts down the sleep time.
5. To clear the preset sleep time, keep pressing the SLEEP button until the “ ” icon
disappears.
EQ Control
This system supports a variety of equalizers and sound eects.
During playback, press the EQ button on the remote control to select a desired MUSIC mode.
Each time the EQ button is pressed, the MUSIC mode will change to the next one as follows:
PASS CLASSIC ROCK POP JAZZ
6. Tap the SKIP/TUNE SEARCH icons on the unit or press the buttons on
the remote control to adjust the minute digits and then press the TIMER button on the
remote control to conrm the TIMER OFF time.
7. Now the “TUNER” indicator will ash on the display. Press the SKIP/TUNE SEARCH
buttons to select the mode (TUNER / CD / USB / CARD / iPod).
8. Press the TIMER button on the remote control again, the timer “VOL-13” indicator will
ash on the display. Tap the SKIP/TUNE SEARCH icons on the unit or press the
buttons on the remote control to adjust the volume to the desired level.
9. After adjusting “TIMER ON” and “TIMER OFF”, press the TIMER button on the remote
control to conrm. The “ ” indicator will show on the display.
10. The unit will be turned on automatically to the selected TUNER / CD / USB / CARD / iPod
mode and turn o when the timer reaches the preset time.
11. To disable the timer setting, press the TIMER button. The “ ” indicator will disappear from
the display.
• Each enable state will be cleared if buttons are not pressed in 10 seconds.
• For the FM tuner timer, it will turn on to the last station you tuned into.
• If the display shows “ERROR” while you set the “TIMER ON” it means both “TIMER ON”
and “TIMER OFF” is the same. In this case, please go to “TIMER OFF” to set the o time
rst.
• Volume will automatically adjust to the setting gradually when the timer is ON.
15
SHFGLC11_IB_110608_Zell.indd 15 08/06/2011 2:03 PM
STANDBY
FUNCTION
IPOD/MEM
/C-ADJ.
/ENTER
/MENU
CD / MP3 / WMA Operation
Playback
1. During POWER ON mode, tap the FUNCTION icon
on the unit or press the FUNCTION button on the
remote control repeatedly to select CD mode. The unit
will start to read the CD/MP3 disc and start playback
automatically.
• This unit can play CD, CD-R, CD-RW, MP3, WMA disc,
8cm and Multi Section of MP3 DISC.
• It can “Playback Transfer Rate in 8-320 kbps”, Max
Readable Folders 99 and 999 tracks.
2. If there is no disc or the disc can’t be read, “NO DISC” will show on the display.
3. Press the CD OPEN/CLOSE button on the unit and the
disc door will slide to the right automatically.
4. Place the CD/MP3/WMA disc with the label side up into
the CD compartment, and then press the CD OPEN/
CLOSE button on the unit to close the disc tray. The unit
will start to read the CD/MP3/WMA disc and playback
automatically.
5. If playback doesn’t start automatically, tap the ENTER
icon on the unit or press the ENTER button on the
remote control, the unit will play the rst track of the CD
disc.
• During iPod mode, the CD OPEN/CLOSE button will disable. Please select other mode
to open the CD/iPod door.
• Do not press or tap any button until the CD/iPod door completely open or close
Please mind your
ngers when the disc
door closing.
16
SHFGLC11_IB_110608_Zell.indd 16 08/06/2011 2:03 PM
To Pause Playback
Tap the ENTER icon on the unit or press the ENTER
button on the remote control to pause the playback, the time
elapsed indicator will ash.
To resume playback, tap the ENTER icon on the unit or
press the ENTER button on the remote control again.
To Stop Playback
Tap the MENU icon on the unit or press the MENU button on the remote control to stop
playback.
Skipping to Another Track
• Tap the SKIP/TUNE SEARCH icons on the unit or press the buttons on the
remote control to skip to the start of the current track or to skip to the next track.
• Tap and hold the SKIP/TUNE SEARCH icons on the unit or press and hold the
buttons on the remote control to skip fast reverse/forward of the current track. Release
the button to resume normal playback.
ID3 Operation (For MP3 / WMA Mode)
• During MP3 playback, press the DISPLAY button on the unit or the remote control to
open the ID3 function. If the MP3/WMA le is written “ID3”, it will automatically search the
information of “TITLE”, “ARTIST” and “ALBUM” indicated on the display.
TITLE ARTIST
CURRENT TIME
ALBUM
• Press the DISPLAY button again to close the ID3 function.
For MP3 / WMA Discs
• During MP3 playback, press the PRESET/FOLDER buttons on the remote control
to skip to the 1st track of the previous/next album.
• During STOP mode, press the PRESET/FOLDER buttons on the remote control
repeatedly to select your desired album to play. Tap the ENTER icon on the unit or
press the ENTER buttons on the remote control to start playing the 1st track in that
album.
17
SHFGLC11_IB_110608_Zell.indd 17 08/06/2011 2:03 PM
Repeat Playback
For CD Mode
Repeat Current Track
Press the REPEAT button on the remote control once, “REPEAT”
indicator will show on the display. The current track will be
played repeatedly.
Repeat the Entire CD
Press the REPEAT button twice, “REPEAT ALL” indicator will show
on the display. All the discs tracks will be played repeatedly in a
cycle.
Cancel Playback Mode
Press the REPEAT button three times to cancel the repeat
function.
For MP3 / WMA Mode
Repeat Current Track
Press the REPEAT button on the remote control once, “REPEAT”
indicator will show on the display. The current track will be
played repeatedly.
Repeat the Entire CD
Press the REPEAT button twice, “REPEAT ALL” indicator will show
on the display. All the discs tracks will be played repeatedly in a
cycle.
Repeat the Album
Press the REPEAT button three times, “REPEAT ALBUM” indicator
will show on the display. The current album will be played
repeatedly in a cycle.
Cancel Playback Mode
Press the REPEAT button four times to cancel the repeat
function.
Random Playback
All tracks on the disc can be played in a random order.
• During playback, press the RANDOM button on the remote
control. The “RANDOM” indicator will show on the display. All
tracks will be played randomly.
• After all the tracks have played once, the playback will stop
automatically.
• To cancel the random playback, press the RANDOM button
on the remote control during RANDOM playback. Normal
playback will resume.
18
SHFGLC11_IB_110608_Zell.indd 18 08/06/2011 2:03 PM
Intro Playback
• Press the INTRO button on the remote control. The “INTRO”
indicator will show on the display. The unit will play the rst
10 seconds of each track.
• Press the INTRO button on the remote control again to
resume the normal playback.
Programmable Playback
A program of up to 32 tracks in CD mode or 64 tracks in MP3 / WMA / USB / SD CARD mode can
be set to play in a preset order.
For CD Mode
1. In STOP mode, tap the MODE icon on the unit or press the
MODE button on the remote control to shift to PROGRAM
mode. “MEMORY” indicator will show on the display.
2. Tap the SKIP/TUNE SEARCH icons on the unit or
press the buttons on the remote control to select
the desired track and then tap the MODE icon on the unit
or press the MODE button on the remote control to store
the track in the memory.
3. To add additional tracks, repeat step 2 (up to 32 tracks).
4. To start playback, tap the ENTER icon on the unit or
press the ENTER button on the remote control. The rst
track of the program will start to play. When all tracks have
been played, the unit will show the number of tracks and
the playing time of the CD tracks.
For MP3 / WMA Mode
1. In STOP mode, tap the MODE icon on the unit or press the
MODE button on the remote control to shift to PROGRAM
mode. “MEMORY” indicator will show and the album
number will ash on the display.
2. Press the PRESET/FOLDER buttons on the remote
control to select the desired album number and then tap
the MODE icon on the unit or press the MODE button
on the remote control. The track number will ash on the
display.
3. Tap the SKIP/TUNE SEARCH icons on the unit or
press the buttons on the remote control to select
the desired track and then tap the MODE icon on the unit
or press the MODE button on the remote control to store
the track in the memory.
4. To add additional tracks, repeat step 2 (up to 64 tracks).
5. To start playback, tap the ENTER icon on the unit or
press the ENTER button on the remote control. It will
play starting with the rst track of the program . When all
tracks have been played, the unit will show the number of
tracks and the playing time of the MP3/WMA tracks.
19
SHFGLC11_IB_110608_Zell.indd 19 08/06/2011 2:03 PM
To Erase the Program
• In STOP mode, you can erase the contents of the memory by tapping the MENU icon on
the unit or pressing the MENU button on the remote control or by opening the disc door.
• Setting a new program will erase the existing one.
• Press the REPEAT button once, “REPEAT” will illuminate on the display. The unit will
repeat the current track.
• Press the REPEAT button twice, “REPEAT ALL“ will illuminate on the display. The unit
will repeat the total number of tracks.
• Press the REPEAT button once more again. The unit will return to play the programme.
USB Operation
1. During POWER ON mode, connect a USB device to the USB port directly.
2. Tap the FUNCTION icon on the unit or press the FUNCTION button on the remote
control repeatedly to select USB mode.
3. If no USB device is connected, “NO USB” will show on the display.
4. The unit will search for all available MP3/WMA les, and start playback automatically.
5. Press the PRESET/FOLDER buttons on the remote control to select the desired
folder.
6. Tap the SKIP/TUNE SEARCH icons on the unit or press the buttons on the
remote control to select a MP3/WMA le number.
• The unit can only playback MP3 and WMA le formats in USB operation.
• This unit supports USB 1.1 and 2.0 versions.
• The unit can support USB devices with up to 32GB of memory.
• The unit cannot play WMA les with protection by “DRM FILE”.
• The unit may not be compatible with all USB devices. This is not an indication of a
problem with the unit.
20
SHFGLC11_IB_110608_Zell.indd 20 08/06/2011 2:03 PM
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
