2. Hay
  3. Standard Issue

Hay Standard Issue User manual

  • Hello! I'm your chat assistant. I've reviewed the instruction manual for the HAY Standard Issue shelves, including the 90x90, 120x120 and 180x120 models. This manual provides detailed steps on assembling and wall-mounting the shelving system with a focus on proper alignment and weight limits. I'm ready to answer any questions you may have about the assembly process, the components, or other specifics outlined in the document.
  • What type of walls are the supplied mounting fixings designed for?
    What should I use if I’m mounting onto other kinds of materials?
    What is the maximum weight per shelf?
– INSTRUCTION MANUAL –
DESIGN BY FRANK
STANDARD ISSUE
 PARTS 
A
Shelf x
3 (90x90,120x120)
A
Shelf x
5 (180x120)
B
Upright x2
C
Screw
x4 (90x90,120x120)
C
Screw
x6 (180x120)
D
Wall plug x4 (90x90,120x120)
D
Wall plug x6 (180x120)
NOTICE
Make sure to check what type of wall you are mounting your Standard Issue onto.
The supplied mounting fixings are designed for use on brick/concrete walls.
Use different rawl plugs if mounting onto other kinds of materials.
NOTICE
Make sure to use a spirit level when
aligning and measuring the holes
.
1.
Depending on the size of your Standard Issue, the placement of the holes will vary.
Please refer to the illustration below when marking and drilling the holes.
90x90 180x120120x120
42 CM
66 CM
60 CM
48,4 CM
48,4 CM
60 CM
74,8 CM
79,2 CM
2.
Mark the holes with a pen.
3.
Drill a hole in the wall using Ø6 drill.
4.
Firmly push the rawl plug
D
into the hole,
making sure that it goes all the way in.
5.
Use the supplied screws
C
and a screwdriver to secure them in the wall.
NOTICE
Make sure to leave 12 cm of
the screws exposed
6.
Align the bar with the screws and mount it to the walls, letting the key holes
slide down over the screws. Tighten the screws completely.
NOTICE
The powder coating is delicate, so be careful when mounting/
dismounting the beams
A
in order to avoid damaging the surface.
7.
Mount the shelves onto the profiles, making sure that both
sides lock securely into place.
8.
Done!
NOTICE
Please note the max. weight is 15 kg per shelf,
which is related to the strength of the wall fixings.
 CARE & MAINTENANCE 
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your furniture.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information on
Standard Issue by scanning the QR code
You can also find the same information here
hay.dk/downloads
Havnen 1 8700 Horsens Denmark
+45 3164 6000 / hay@hay.com
10012023
/