WELDING GAUGE Model No. WGU-2S
Thank you for purchasing the Niigata Seiki Welding Gauge.
For proper operation, please read this manual thoroughly before use.
INSTRUCTION MANUAL
SPECIFICATIONS
FEATURES
APPLICATIONS
DIMENSIONS (mm)
-POINT ADJUSTMENT
MEASUREMENT
1511
012345678 9 10
0
1
2
mm
cm
0123456 7 8 9 10
0
1
2
mm
cm
Set the position of the Adjustable Contact
Point for measurement on flat area of
base material.
Loosen the Gauge Head Set-Screw using
a standard screwdriver.
Hold the gauge to a flat surface, insuring
that the two Contact Points and the Gauge
Head are in contact with the surface.
Rotate the Gauge Head to adjust the
Undercut Depth reading to 0. Once set
to 0, tighten the Gauge Head Set-Screw
to secure the Gauge Head.
After setting the 0-Point, position the
Gauge Head to the center of the undercut.
Pointer will show the undercut depth.
Dedicated tool for measuring weld undercut
depth and length
6.5
105
117
108
62
1.5
12
1.5
Undercut
Depth Scale
Undercut Length Scale
Direct Measurement
Gauge Head
Adjustment Slot
Contact Point
(Adjustable)Contact Point
(Fixed)
Gauge Head
Set-Screw
Figure:1
Figure:2
Figure:1
Figure:2
Gauge Head
Set-Screw
Rotate to set 0-Point
I269-K
Niigata seiki Co., Ltd.
6-15-22, Tsukanome, Sanjo, Niigata, Japan, 955-0055
Tel. : +81-256-31-5660 Fax. : +81-256-39-7730
MAIL:[email protected]
URL http://www.niigataseiki.co.jp
Body Material : Stainless Steel (SUS410)
Measurement Range
Depth : 02.0mm
Graduations 0.2mm
Accuracy 0.1mm
Length : 010cm
Measurement Base Adjustment Range:
approx 40mm
PLEASE NOTE
Fast and accurate measurement of
undercut depth and length.
Adjustable gauge head for setting
Zero-point.
This is a precision instrument, Handle with Care, do not drop.
Use only as directed.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Niigata seiki FDW-1 User manual
-
-
-
-
-
-
-
-
-