Sunnydaze Decor AMP-F802ERTH Operating instructions

Brand: Sunnydaze Decor

Model: AMP-F802ERTH

Type: Operating instructions

This manual is also suitable for

SETUP AND OPERATING INSTRUCTIONS

Step 1 - Twist and lock large tier

to base pedestal

Step 4 - Twist and lock 2nd tier

to top piece

Step 7 -Twist and lock small

pedestal to large tier

Step 2 - Feed pump cord

through hole in large tier.

Step 5 - Twist and lock 2nd tier

to small pedestal.

Step 8- Fill both tiers with

water.

Step 3 - Feed water tube through

2nd tier

Step 6- Attach water hose to

pump

Step 9-Assemble solar panel

(Continued next page)

Two Tier Solar Fountain

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.

Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with

the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine

the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty

If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:

customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact

Purchase Date: / / Order/Customer Reference Number:

Step 10- Plug cord into solar

panel and push “Solar

ON/OFF” button (with green

light on, pump will run in direct

sunlight)

Cautions:

• Any altering of the

product iteslf or

changing of the

components is forbidden

• Do not connect the

pump to an AC voltage

power, it is ONLY for

DC voltage power.

• Operate in freshwater

only (never above 50C),

and especially keep

away from flammable

liquids.

• Do not strike the solar

panel

• Do not let the pump run

dry

Operating Instructions:

MODE of “Solar Powered”:

We recommend you use this

mode during the day. Press the

“solar on/off” button, the green

indicator light of solar power is

on or off; The pump will only

run in bright or good sublight

conditions. On bright sunny

days surplus power will charge

the battery. The pump will not

work on cloudy days as there is

insufficeint power to run the

pump.

MODE of “Battery powered”:

We recommmend you use this

mode at night or on a cloudy

day. When the system is on,

press the “Battery on/off “

button, the red indicator light of

th ebattery power is on; On

bright sunny days the battery

will fully charge and the pump

will run for up to 4 hours. On

cloudy days the pump will run

for significantly less time. The

mode will switch to “solar

power” automatically when 4

hours is ending.

Cleaning and Maintenance:

Solar panel: The panel should

be cleaned periodically with a

soft tissue. Regular cleaning of

th epanel is advised to maintain

potimum conversion of th

eusn’s energy into direct

current.

Pump: If, after a period of time,

the pump starts to lose power or

stops workign check fo rth

ebuild up of sediment, scale or

dirt in the filter. Remove the

pump cover and the impeller

cover. Clean them and the filter

by fresh water.

Replace Batteries:

Rechargeable battery becomes

less efficient with repeated

charge and discharge of cycles.

If you find that the battery

appears less efficient or does

not run as long, we suggest you

try to boost charge the battery.

If after this boost charge your

battery still does not perform to

expectaions, the battery is

beyond its lifespan. You may

open the battery cover to

replace 4AA size new

rechargable batteries.

Sunnydaze Decor AMP-F802ERTH Operating instructions

Brand: Sunnydaze Decor

Model: AMP-F802ERTH

Type: Operating instructions

This manual is also suitable for

Download PDF

report

Sunnydaze Decor AMP-F802ERTH Operating instructions

This manual is also suitable for

Sunnydaze Decor AMP-F802ERTH Operating instructions

Related papers

Other documents