ASSEMBLY INSTRUCTIONS
ITEM#: A206005301
SKU# 810554371
SANDPOINTE DINING
BENCH LIGHT COLOR
Need help? We are here for you! 1(866)578-6569 24/7 • Toll Free
SANDPOINTE
2/8
• Please read and understand this entire manual before attempting to assemble or install the product.
• Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
• Do not place the product on a damp or conductive subsurface.
• Bench is for sitting purpose only. Standing on or misuse of bench may result in damage or injury. Not intended
for commercial use.
• WEIGHT LIMIT 250 LBS(113KG).
• Keep all children and pets away from assembly area.
• Children and pets should be supervised when they are in the area of the bench construction.
• Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging branches,
laundry line or electrical wires.
• Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them secure!
• Before using, clean the bench completely with a soft dry towel.
• Do not use harsh abrasives or cleaners.
• When not in use, store in a cool, dry area.
WHAT IS COVERED?
The limited warranty is extended to the original purchaser and applies to material and manufacturer’s defect provided
the item is maintained with care and used only for personal, residential purposes.
Warranty: 12 months
GENERAL BEST PRACTICES FOR ASSEMBLY:
WARNINGS:
WARRANTY:
MAINTENANCE:
3/8
EXPLODED DRAWING
A P00160013103 Seat 1
B P00540056102 Left Leg 1
C P00540056202 Right Leg 1
D P00050103101 Connector 1
E P00180006103 Cushion 1
F P005300029 Foot pad
Pre-assembled 4
H1 H100010008 Bolt M6*15 4 1
H2 Bolt M6*30 8 1
HW H090030002 Wrench M6 1 0
H100010085
4/8
PARTS LIST
Label Part Number Description Qty Part Image
HARDWARE LIST
Add
Label Part Number Description Qty Part Image
• Tools needed and not included
• Separating parts before starting
How many people are needed for the installation
Provided in hardware pack
5/8
HELPFUL HINTS
Assembled View:
Attached the Left Leg (B) and Right
Leg ( C) to the Seat (A) with
Bolts( H2)， tighten the Bolts to
80% depth with Wrench(HW).
1x 1x
8x
1x
6/8
STEP 1
Assembled View:
Attached the Connector ( D) to the
Left Leg (B) and Right Leg ( C) with
Bolts( H1), tighten all the Bolts to
100% depth with Wrench(HW) at
last.
1x
4x
7/8
STEP 2
Assembled View:
Put the Cushion (E) on the
Seat (A), stick the buckle.
1x
8/8
STEP 3
/
