American Standard R127SS User manual

Category
Faucets
Type
User manual
B9
© 2008 AS America Inc.
TRIM KITS
FOR VOLUME & TEMPERATURE CONTROL VALVES
See reverse for available trim kits.
MODEL NUMBER:
R120 Pressure Balance Rough Valve Body only
Direct sweat inlets/outlets. LESS trim.
R120SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
R125 Pressure Balance Rough Valve Body only
Female thread inlets/outlets. LESS trim.
R125SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Female thread inlets/outlets. Screwdriver stops. LESS trim.
R127 Pressure Balance Rough Valve Body only
PEX inlets/Direct sweat outlets. LESS trim.
R127SS Pressure Balance Rough Valve Body only
with Screwdriver stops
PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim.
GENERAL DESCRIPTION:
Cast brass body, washerless 47mm ceramic disc valve
cartridge with volume and temperature control, and hot
limit safety stop. Pressure balancing cartridge maintains
constant output temperature in response to changes in
relative hot and cold supply pressure. One-half inch
inlets and outlets (choice of direct sweat, threaded, or
PEX). Available with screwdriver stops. Rough-in
plaster guard designed for use as thin-wall mounting
adaptor. Valve body will accept a variety of decorative
Bath/Shower trim kits.
PRODUCT FEATURES:
Cast Brass Valve Body: Durable - Quality that will
last a lifetime. Ideal material for prolonged contact with
water.
Ceramic Disc Valve Cartridge: Assures a lifetime
of drip-free performance. Allows easy control over both
water temperature and volume.
Pressure Balancing Valve Cartridge: Maintains
constant output temperature in response to changes in
relative hot and cold supply pressure. Diaphragm
system engineered to eliminate cross flow. Avoids
failure due to mineral deposits - ideal for use in hard
water.
Adjustable Hot Limit Safety Stop: Limits the
amount of hot water allowed to mix with cold. Reduces
the risk of accidental scalding.
Exclusive Plaster Guard: Plaster guard is designed
to protect valve during installation and serve as a
mounting plate for thin-wall installations. Two piece
design allows valve to be tested prior to trim
installation.
Wide Rough-in Range: From 1-5/8" to 3-1/4".
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature a cast brass valve body. Shall feature ceramic disc valve cartridge which allows user to control both water
temperature and volume. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure
due to mineral deposits. Shall also feature a hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model #
R12____, Trim Kit - American Standard Model # ____.____.
R120 Valve Body Shown
Available Trim Kits
FINISHED
WALL
TOP OF TUB RIM
BOTTOM OF TUB
(1-5/8 TO 3-1/4)
41mm TO 83mm
1/2"
NPT
1/2"
COPPER
102 mm
(4")
25mm
(1 MIN.)
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
THREADED (STOPS) (R125SS)
86 mm
(3-3/8")
INLETS 1/2" NPT
149 mm
(5-7/8")
OPTION 457 mm
(18")
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 1651mm (65)
AND 1981mm (78)
THREADED (R125)
INLETS
86 mm
(3-3/8")
INLETS
1/2" NPT
86 mm
(3-3/8")
SHR
1/2" NPT
TUB PORT
1/2" NPT
INLETS
103 mm
(4-1/16")
103 mm
(4-1/16")
INLETS 1/2" NOM.
COPPER SWEAT
SHR. 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
51.5 mm
(2-1/32")
51 mm
(2")
SHR. 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
SWEAT (STOPS) (R120SS)
SWEAT (R120)
103 mm
(4-1/16")
INLETS
1/2" NPT
149 mm
(5-7/8")
VALVE BODY OPTIONS
Ceramix
Princeton
Copeland
Colony Soft
Reliant 3
• Showerhead with 2.5gpm/9.5L.min. flow restrictor.
R120
Direct
Sweat
Inlets/
Outlets
R125
Female
Thread
Inlets/
Outlets
R125SS
Female Thread
Inlets/Outlets
w/ Screwdriver
Stops
R120SS
Direct Sweat
Inlets/Outlets
w/ Screwdriver
Stops
R127
PEX
Inlets/Direct
Sweat
Outlets
R127SS
PEX
Inlets/Direct
Sweat Outlets
w/ Screwdriver
Stops
VALVES
Valve + Trim: Trim Kit & Valve Body Packaged Separately
To order: Specify valve body and trim kit desired
Example: R120 - Direct Sweat Valve Body
T508.502 - Princeton Bath/Shower Trim Kit
CODES AND STANDARDS
These products meet or exceed the
following codes and standards:
ANSI A 117.1
ASSE 1016
ASME A112.18.1
CSA B 125
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0
2
4
6
8
Spout
10080604020
Trim Kits for R120, R120SS, R125, R125SS, R127, R127SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min. maximum flow.
TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
1-1/2 REF.
(38mm)
Trim Kits for R120, R120SS, R125, R125SS, R127, R127SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min. maximum flow.
TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
Model #
Description
Trim Kit Finishes Roughing-In Dimensions
Trim Kits for R120, R120SS, R125, R125SS, R127, R127SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min. maximum flow.
TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
Model #
Description
Trim Kit Roughing-In Dimensions
T808.502 BATH/SHOWER Trim Kit
.002
.008
.068
.099
.295
.297
.299
Polished Chrome
Polished Nickel
Blackened Bronze (PVD)
Polished Brass (PVD)
Satin Nickel (PVD)
Satin/Brass mixage (PVD)
Pol. Chrome/Brass (PVD) mix.
• Brass wall escutcheon
• Metal Lever Handle
• Rain showerhead
• Cast brass shower arm
• Cast brass diverter tub spout
T808.501 SHOWER ONLY Trim Kit
• Brass wall escutcheon
• Metal Lever Handle
• Rain showerhead
• Cast brass shower arm
T808.500 BATH/SHOWER Trim Kit
• Brass wall escutcheon
• Metal Lever Handle
JASMINE
FINISHED WALL
4"
(102mm)
2"
(51mm)
TOP OF TUB RIM
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
1-5/8" TO 3-1/4"
(41mm - 83mm)
7-1/4" REF.
(184mm)
7-5/8"
(194mm)
1-1/2" REF.
8.5" REF.
(215mm)
4-7/8"
(123mm)
1-1/2" REF.
(38mm)
18"
(457mm)
optional
7-5/8"
(194mm)
• Metal wall escutcheon
• Porcelain Lever Handle
• 5" Adjustable showerhead
• Cast brass I.P.S. diverter
tub spout
T6281 SHOWER ONLY Trim Kit
• Metal wall escutcheon
• Porcelain Lever Handle
• 5" Adjustable showerhead
T62820 BATH/SHOWER Trim Kit
• Metal wall escutcheon
• Porcelain Lever Handle
T6282
T6282S
Polished Chrome
Satin Nickel (PVD)
T6281
T6281S
Polished Chrome
Satin Nickel (PVD)
T6280
T6280S
Polished Chrome
Satin Nickel (PVD)
T6282 BATH/SHOWER Trim Kit
STANDARD
FINISHED
WALL
102mm
(4)
TOP OF
TUB RIM
BOTTOM
OF TUB
1880mm
(74)
FOR HEAD
CLEARANCE
130mm
(5-1/8)REF.
57mm - 83mm
(2-1/4 - 3-1/4)
457
(18)
OPTIONAL
143mm
(5-5/8)
REF.
194mm
(7-5/8)
181mm
(7-1/8)
25mm
(1)
191mm
(7-1/2) REF.
Trim Kit Finishes
Finishes
Roughing-In Dimensions
.002
.295
Polished Chrome
Satin Nickel (PVD)
Model #
Description
T675.502 BATH/SHOWER Trim Kit
T675.501 SHOWER ONLY Trim Kit
T675.500 VALVE ONLY Trim Kit
• Metal Lever handle
• "Easy Clean" Showerhead
• Shower arm and flange
• Slip-on Diverter tub spout
• Metal Lever handle
• "Easy Clean" Showerhead
• Shower arm and flange
• Metal Lever handle
COLONY SOFT
18"
(457mm)
optional
7" REF.
(178mm)
FINISHED WALL
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
4" REF.
(102mm)
5-1/8" REF.
(130mm)
TOP OF TUB RIM
4" REF.
(102 mm)
1-5/8" TO 3-1/4"
(41mm - 83mm.)
6"
(153mm)
3"
(76mm)
6"
(153mm)
1-1/2 REF.
(38mm)
18"
(457mm)
optional
7" REF.
(178mm)
FINISHED WALL
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
4" REF.
(102mm)
5-1/8" REF.
(130mm)
TOP OF TUB RIM
4" REF.
(102 mm)
1-5/8" TO 3-1/4"
(41mm - 83mm.)
6"
(153mm)
3"
(76mm)
6"
(153mm)
1-1/2 REF.
(38mm)
.002
.295
Polished Chrome
Satin Nickel (PVD)
T480.502 BATH/SHOWER Trim Kit
• Brass wall escutcheon
• Metal Lever handle
• "Vario" adjustable showerhead
• Shower arm and flange
• Slip-on Diverter tub spout
T480.501 SHOWER ONLY Trim Kit
• Brass wall escutcheon
• Metal Lever handle
• "Vario" adjustable showerhead
• Shower arm and flange
T480.500 VALVE ONLY Trim Kit
• Brass wall escutcheon
• Metal Lever handle
SEVA
18"
(457mm)
optional
7" REF.
(178mm)
FINISHED WALL
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
4" REF.
(102mm)
5-1/8" REF.
(130mm)
TOP OF TUB RIM
4" REF.
(102 mm)
8"
(203mm)
1-5/8" TO 3-1/4"
(41mm - 83mm.)
7-1/8"
(181mm)
4-1/2"
(113mm)
.002
.295
T000.502 BATH/SHOWER Trim Kit
• Brass wall escutcheon
• Metal Lever handle
• "Vario" adjustable showerhead
• Cast Brass shower arm
• Cast Brass diverter tub spout
T480.508 BATH/SHOWER Trim Kit
• Brass wall escutcheon
• Metal lever handle
• Water Saving FloWise
Showerhead
• Turbine Spray-1.5gpm max. flow
• Angle adjustable
• Shower arm and flange
• Slip-on diverter tub spout
• LESS valve
T000.501 SHOWER ONLY Trim Kit
• Brass wall escutcheon
• Metal Lever handle
• "Vario" adjustable showerhead
• Cast Brass shower arm
T000.500 VALVE ONLY Trim Kit
• Brass wall escutcheon
• Metal Lever handle
Polished Chrome
Satin Nickel (PVD)
.002
.295
Polished Chrome
Satin Nickel (PVD)
CERAMIX
18"
(457mm)
optional
1/2" REF .
(13mm)
7" REF.
(178mm)
FINISHED WALL
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
4" REF.
(102mm)
1-5/8" TO 3-1/4"
(41mm - 83mm.)
7-1/8" REF.
(182mm)
6-11/16"
(170mm)
4-3/4"
(121mm)
5" REF.
(127mm)
TOP OF TUB RIM
4" REF.
(102 mm)
Note: Trim kits CANNOT be used
with Ceramix spool type
valves.
1-1/2 REF.
(38mm)
PRINCETON
T508.502 BATH/SHOWER Trim Kit
• Metal Lever Handle
• Wall escutcheon
• Showerhead, arm and flange
• Slip-on diverter tub spout
• LESS Valve
• Metal Lever Handle
• Wall escutcheon
• Showerhead, arm and flange
• LESS Valve
T508.501 SHOWER ONLY Trim Kit
T508.500 VALVE ONLY Trim Kit
• Metal Lever Handle
• Wall escutcheon
• LESS Valve
.002
.068
.295
Polished Chrome
Blackened Bronze
Satin Nickel (PVD)
18"
(457mm)
optional
3-5/8
(92mm)
optional
7" REF.
(178mm)
FINISHED WALL
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
4" REF.
(102mm)
5" REF.
(127mm)
TOP OF TUB RIM
4" REF.
(102 mm)
1-5/8" TO 3-1/4"
(41mm - 83mm.)
8-1/8"
(205mm)
Off
Hot
T385.522 BATH/SHOWER Trim Kit
RELIANT 3
RELIANT 3
WITH FLOWISE
SEVA
WITH FLOWISE
®
FINISHED WALL
4"
(102mm)
TOP OF TUB RIM
18"
(457mm)
optional
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
1-5/8"" TO 3-1/4"
(41mm - 83mm)
5-1/8" REF
(130mm)
9"
(228mm)
1" REF.
(25mm)
3"
(76mm)
13"
(330mm)
T385.521 SHOWER ONLY Trim Kit
T385.520 VALVE ONLY Trim Kit
• Large metal wall escutcheon
• Metal lever Loop Handle
• LESS valve
• Large metal wall escutcheon
• Metal lever Loop handle
• "Easy Clean" Showerhead
• Shower arm and flange
• LESS valve
• Large metal wall escutcheon
• Metal lever Loop handle
• "Easy Clean" Showerhead
• Shower arm and flange
• Slip-on diverter tub spout
• LESS valve
T385.522 BATH/SHOWER Trim Kit
T4 80.507 SHOWER ONLY Trim Kit
• Metal wall escutcheon
• Metal lever handle
• Water Saving FloWise
Showerhead
• Turbine Spray-1.5gpm max. flow
• Angle adjustable
• Shower arm and flange
• LESS valve
• Metal wall escutcheon
• Metal lever handle
• Water Saving FloWise
®
Showerhead
• Turbine Spray-1.5gpm max. flow
• Angle adjustable
• Shower arm and flange
• Slip-on diverter tub spout
• LESS valve
.002
.295
Polished Chrome
Satin Nickel (PVD)
.002
.295
Polished Chrome
Satin Nickel (PVD)
152mm
(6 REF.)
108mm
(4-1/4 REF.)
FINISHED WALL
4"
(102mm)
TOP OF TUB RIM
18"
(457mm)
optional
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
1-5/8"" TO 3-1/4"
(41mm - 83mm)
5-1/8" REF
(130mm)
1" REF.
(25mm)
7" REF
(178mm)
4" REF
(102mm)
T385.502 BATH/SHOWER Trim Kit
RELIANT 3
FINISHED WALL
4"
(102mm)
TOP OF TUB RIM
18"
(457mm)
optional
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
1-5/8"" TO 3-1/4"
(41mm - 83mm)
5-1/8" REF
(130mm)
6"
(153mm)
1" MIN.
(25mm)
152mm
(6 REF.)
3"
(76mm)
6"
(153mm)
T385.501 SHOWER ONLY Trim Kit
T385.500 VALVE ONLY Trim Kit
• Metal wall escutcheon
• Metal lever Handle
• LESS valve
• Metal wall escutcheon
• Metal lever handle
• "Easy Clean" Showerhead
• Shower arm and flange
• LESS valve
• Metal wall escutcheon
• Metal lever handle
• "Easy Clean" Showerhead
• Shower arm and flange
• Slip-on diverter tub spout
• LESS valve
.002
.295
Polished Chrome
Satin Nickel (PVD)
108mm
(4-1/4 REF.)
Model #
Description
Trim Kit Finishes Roughing-In Dimensions
Trim Kits for R120, R120SS, R125, R125SS, R127, R127SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min. maximum flow.
TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
PEX (STOPS) (R127SS)
52 mm
(2-1/32")
104 mm
(4-1/16")
1/2" PEX INLETS
(ASTM F1807)
165mm
(6-1/2")
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
PEX (R127)
52 mm
(2-1/32")
104 mm
(4-1/16")
1/2" PEX INLETS
(ASTM F1807)
109mm
(4-1/4")
Moments
B/S
Shower
Valve
B/S
Shower
T675.502
T675.501
T675.500
T385.502
T385.501
T385.500
T385.522
T385.521
T385.520
T480.502
T480.501
T480.500
T508.502
T508.501
T508.500
Seva
Princeton
Reliant 3
Colony
"Soft"
TRIM KITS
Reliant 3
w/mod
Plate
T480.508
T480.507
Seva
with
FloWise
T385.508
T385.507
Reliant 3
with
FloWise
T675.508
T675.507
Colony
"Soft" with
FloWise
®
T000.502
T000.501
T000.500
T506.502
T506.501
T506.500
T6282
T6281
T6280
T808.502
T808.501
T808.500
T010.502
T010.501
T010.500
B/S
Shower
Valve
Jasmine
Ceramix Standard
TRIM KITS
T005.502
T005.501
T005.500
MOMENTS
T506.502
BATH/SHOWER Trim Kit
Polished Chrome
Stainless Steel (PVD)
T506.501 SHOWER ONLY Trim Kit
.002
.075
T506.500 VALVE ONLY Trim Kit
• Brass wall escutcheon
•Adjustable “3 function”
showerhead
• Brass diverter tub spout
• LESS Valve
• Brass wall escutcheon
•Adjustable “3 function”
showerhead
• LESS Valve
• Brass wall escutcheon
• LESS Valve
5-5/8" REF.
(143mm)
BOTTOM OF TUB
74" FOR
HEAD CLEARANCE
(188cm)
FINISHED WALL
8-1/8" REF.
(216mm)
4"
(102mm)
6-1/2"
(165mm)
18"
(457mm)
OPTIONAL
TOP O F
TUB R I M
8-3/8"
(213mm)
2-3/8"
(60mm)
3/4" TO 2-3/8"
(19mm-60mm)
SH R
TU B
1-1/2" REF.
(13mm)
Green Tea
Copeland
.002
.068
.295
Polished Chrome
Blackened Bronze (PVD)
Satin Nickel (PVD)
COPELAND
TOP O F
TUB R I M
T005.502 BATH/SHOWER Trim Kit
T005.500 VALVE ONLY Trim Kit
• Metal Lever Handle
• Metal wall escutcheon
• Adjustable “3 function”
showerhead, arm and flange
• Slip-on diverter tub spout
• LESS Valve
• Metal Lever Handle
• Metal wall escutcheon
• Adjustable “3 function”
showerhead, arm and flange
• LESS Valve
• Metal Lever Handle
• Metal wall escutcheon
• LESS Valve
T005.501 SHOWER ONLY Trim Kit
FINISHED WALL
102mm
4"
BOTTOM OF TUB
1880mm
74" FOR HEAD
CLEARANCE
108mm
4-1/4" REF.
41mm TO 76mm
1-5/8" TO 3"
457mm
18" OPTIONAL
124mm
4-7/8" REF.
191mm
7-1/2"
38mm
1-1/2"
152mm
6" REF.
"SEE ILLUSTRATION "
Polished Chrome
Stainless Steel (PVD)
.002
.075
GREEN TEA
T010.501 SHOWER ONLY Trim Kit
T010.500 VALVE ONLY Trim Kit
T010.502 BATH/SHOWER Trim Kit
• Metal wall escutcheon
• 6 3/4" Rain showerhead
• Brass shower arm
• Metal diverter tub spout
• Metal Lever Handle
• LESS valve
• Metal wall escutcheon
• 6 3/4" Rain showerhead
• Brass shower arm
• Metal Lever Handle
• LESS valve
• Metal wall escutcheon
• Metal Lever Handle
• LESS valve
FINISHED WALL
102mm
4"
1880mm
74" FOR HEAD
CLEARANCE
457mm
18" OPTIONAL
191mm
7-1/2" Dia.
241mm
9-1/2" REF.
TOP OF TUB RIM
BOTTOM OF TUB
79mm
3-1/8" REF.
1-5/8" TO 3"
117mm
4-5/8" REF.
149mm
5-7/8" REF.
1/2" NPT
1/2" NPT
"SEE ILLUSTRATION "
109mm
4-3/16"
.002
.068
Polished Chrome
Satin Nickel (PVD)
COLONY SOFT
WITH
FLOWISE
T675.508 BATH/SHOWER Trim Kit
• Metal lever handle
Water Saving FloWise
®
Showerhead
• Turbine Spray - 1.5gpm max. flow
• Angle adjustable
• Showerhead, arm and flange
• Diverter tub spout
• Less valve
T675.507 SHOWER ONLY Trim Kit
• Metal lever handle
Water Saving FloWise
Showerhead
• Turbine Spray - 1.5gpm max. flow
• Angle adjustable
• Showerhead, arm and flange
• Less valve
Seva
Jasmine
Green Tea
StandardMoments
FINISHED WALL
4"
(102mm)
TOP OF TUB RIM
18"
(457mm)
optional
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
1-5/8"" TO 3-1/4"
(41mm - 83mm)
5-1/8" REF
(130mm)
1" REF.
(25mm)
7" REF
(178mm)
4" REF
(102mm)
6"
(153mm)
3"
(76mm)
6"
(153mm)
8"
(203mm)
7-1/8"
(181mm)
4-1/2"
(113mm)
B10
© 2008 AS America Inc.
TRIM KITS
FOR VOLUME & TEMPERATURE CONTROL VALVES
See reverse for available trim kits.
MODEL NUMBER:
R120 Pressure Balance Rough Valve Body only
Direct sweat inlets/outlets. LESS trim.
R120SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
R125 Pressure Balance Rough Valve Body only
Female thread inlets/outlets. LESS trim.
R125SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Female thread inlets/outlets. Screwdriver stops. LESS trim.
R127 Pressure Balance Rough Valve Body only
PEX inlets/Direct sweat outlets. LESS trim.
R127SS Pressure Balance Rough Valve Body only
with Screwdriver stops
PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim.
GENERAL DESCRIPTION:
Cast brass body, washerless 47mm ceramic disc valve
cartridge with volume and temperature control, and hot
limit safety stop. Pressure balancing cartridge maintains
constant output temperature in response to changes in
relative hot and cold supply pressure. One-half inch
inlets and outlets (choice of direct sweat, threaded, or
PEX). Available with screwdriver stops. Rough-in
plaster guard designed for use as thin-wall mounting
adaptor. Valve body will accept a variety of decorative
Bath/Shower trim kits.
PRODUCT FEATURES:
Cast Brass Valve Body: Durable - Quality that will
last a lifetime. Ideal material for prolonged contact with
water.
Ceramic Disc Valve Cartridge:
Assures a lifetime
of drip-free performance. Allows easy control over both
water temperature and volume.
Pressure Balancing Valve Cartridge: Maintains
constant output temperature in response to changes in
relative hot and cold supply pressure. Diaphragm
system engineered to eliminate cross flow. Avoids
failure due to mineral deposits - ideal for use in hard
water.
Adjustable Hot Limit Safety Stop: Limits the
amount of hot water allowed to mix with cold. Reduces
the risk of accidental scalding.
Exclusive Plaster Guard: Plaster guard is designed
to protect valve during installation and serve as a
mounting plate for thin-wall installations. Two piece
design allows valve to be tested prior to trim
installation.
Wide Rough-in Range: From 1-5/8" to 3-1/4".
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature a cast brass valve body. Shall feature ceramic disc valve cartridge which allows user to control both water
temperature and volume. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure
due to mineral deposits. Shall also feature a hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model #
R12____, Trim Kit - American Standard Model # ____.____.
R120 Valve Body Shown
Available Trim Kits
FINISHED
WALL
TOP OF TUB RIM
BOTTOM OF TUB
(1-5/8 TO 3-1/4)
41mm TO 83mm
1/2"
NPT
1/2"
COPPER
102 mm
(4")
25mm
(1 MIN.)
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
THREADED (STOPS) (R125SS)
86 mm
(3-3/8")
INLETS 1/2" NPT
149 mm
(5-7/8")
OPTION 457 mm
(18")
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 1651mm (65)
AND 1981mm (78)
THREADED (R125)
INLETS
86 mm
(3-3/8")
INLETS
1/2" NPT
86 mm
(3-3/8")
SHR
1/2" NPT
TUB PORT
1/2" NPT
INLETS
103 mm
(4-1/16")
103 mm
(4-1/16")
INLETS 1/2" NOM.
COPPER SWEAT
SHR. 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
51.5 mm
(2-1/32")
51 mm
(2")
SHR. 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
SWEAT (STOPS) (R120SS)
SWEAT (R120)
103 mm
(4-1/16")
INLETS
1/2" NPT
149 mm
(5-7/8")
VALVE BODY OPTIONS
Ceramix
Princeton
Copeland
Colony Soft
Reliant 3
• Showerhead with 2.5gpm/9.5L.min. flow restrictor.
R120
Direct
Sweat
Inlets/
Outlets
R125
Female
Thread
Inlets/
Outlets
R125SS
Female Thread
Inlets/Outlets
w/ Screwdriver
Stops
R120SS
Direct Sweat
Inlets/Outlets
w/ Screwdriver
Stops
R127
PEX
Inlets/Direct
Sweat
Outlets
R127SS
PEX
Inlets/Direct
Sweat Outlets
w/ Screwdriver
Stops
VALVES
Valve + Trim: Trim Kit & Valve Body Packaged Separately
To order: Specify valve body and trim kit desired
Example: R120 - Direct Sweat Valve Body
T508.502 - Princeton Bath/Shower Trim Kit
CODES AND STANDARDS
These products meet or exceed the
following codes and standards:
ANSI A 117.1
ASSE 1016
ASME A112.18.1
CSA B 125
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0
2
4
6
8
Spout
10080604020
Trim Kits for R120, R120SS, R125, R125SS, R127, R127SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min. maximum flow.
TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
1-1/2 REF.
(38mm)
Trim Kits for R120, R120SS, R125, R125SS, R127, R127SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min. maximum flow.
TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
Model #
Description
Trim Kit Finishes Roughing-In Dimensions
Trim Kits for R120, R120SS, R125, R125SS, R127, R127SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min. maximum flow.
TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
Model #
Description
Trim Kit Roughing-In Dimensions
T808.502 BATH/SHOWER Trim Kit
.002
.008
.068
.099
.295
.297
.299
Polished Chrome
Polished Nickel
Blackened Bronze (PVD)
Polished Brass (PVD)
Satin Nickel (PVD)
Satin/Brass mixage (PVD)
Pol. Chrome/Brass (PVD) mix.
• Brass wall escutcheon
• Metal Lever Handle
• Rain showerhead
• Cast brass shower arm
• Cast brass diverter tub spout
T808.501 SHOWER ONLY Trim Kit
• Brass wall escutcheon
• Metal Lever Handle
• Rain showerhead
• Cast brass shower arm
T808.500 BATH/SHOWER Trim Kit
• Brass wall escutcheon
• Metal Lever Handle
JASMINE
FINISHED WALL
4"
(102mm)
2"
(51mm)
TOP OF TUB RIM
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
1-5/8" TO 3-1/4"
(41mm - 83mm)
7-1/4" REF.
(184mm)
7-5/8"
(194mm)
1-1/2" REF.
8.5" REF.
(215mm)
4-7/8"
(123mm)
1-1/2" REF.
(38mm)
18"
(457mm)
optional
7-5/8"
(194mm)
• Metal wall escutcheon
• Porcelain Lever Handle
• 5" Adjustable showerhead
• Cast brass I.P.S. diverter
tub spout
T6281 SHOWER ONLY Trim Kit
• Metal wall escutcheon
• Porcelain Lever Handle
• 5" Adjustable showerhead
T62820 BATH/SHOWER Trim Kit
• Metal wall escutcheon
• Porcelain Lever Handle
T6282
T6282S
Polished Chrome
Satin Nickel (PVD)
T6281
T6281S
Polished Chrome
Satin Nickel (PVD)
T6280
T6280S
Polished Chrome
Satin Nickel (PVD)
T6282 BATH/SHOWER Trim Kit
STANDARD
FINISHED
WALL
102mm
(4)
TOP OF
TUB RIM
BOTTOM
OF TUB
1880mm
(74)
FOR HEAD
CLEARANCE
130mm
(5-1/8)REF.
57mm - 83mm
(2-1/4 - 3-1/4)
457
(18)
OPTIONAL
143mm
(5-5/8)
REF.
194mm
(7-5/8)
181mm
(7-1/8)
25mm
(1)
191mm
(7-1/2) REF.
Trim Kit Finishes
Finishes
Roughing-In Dimensions
.002
.295
Polished Chrome
Satin Nickel (PVD)
Model #
Description
T675.502 BATH/SHOWER Trim Kit
T675.501 SHOWER ONLY Trim Kit
T675.500 VALVE ONLY Trim Kit
• Metal Lever handle
• "Easy Clean" Showerhead
• Shower arm and flange
• Slip-on Diverter tub spout
• Metal Lever handle
• "Easy Clean" Showerhead
• Shower arm and flange
• Metal Lever handle
COLONY SOFT
18"
(457mm)
optional
7" REF.
(178mm)
FINISHED WALL
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
4" REF.
(102mm)
5-1/8" REF.
(130mm)
TOP OF TUB RIM
4" REF.
(102 mm)
1-5/8" TO 3-1/4"
(41mm - 83mm.)
6"
(153mm)
3"
(76mm)
6"
(153mm)
1-1/2 REF.
(38mm)
18"
(457mm)
optional
7" REF.
(178mm)
FINISHED WALL
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
4" REF.
(102mm)
5-1/8" REF.
(130mm)
TOP OF TUB RIM
4" REF.
(102 mm)
1-5/8" TO 3-1/4"
(41mm - 83mm.)
6"
(153mm)
3"
(76mm)
6"
(153mm)
1-1/2 REF.
(38mm)
.002
.295
Polished Chrome
Satin Nickel (PVD)
T480.502 BATH/SHOWER Trim Kit
• Brass wall escutcheon
• Metal Lever handle
• "Vario" adjustable showerhead
• Shower arm and flange
• Slip-on Diverter tub spout
T480.501 SHOWER ONLY Trim Kit
• Brass wall escutcheon
• Metal Lever handle
• "Vario" adjustable showerhead
• Shower arm and flange
T480.500 VALVE ONLY Trim Kit
• Brass wall escutcheon
• Metal Lever handle
SEVA
18"
(457mm)
optional
7" REF.
(178mm)
FINISHED WALL
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
4" REF.
(102mm)
5-1/8" REF.
(130mm)
TOP OF TUB RIM
4" REF.
(102 mm)
8"
(203mm)
1-5/8" TO 3-1/4"
(41mm - 83mm.)
7-1/8"
(181mm)
4-1/2"
(113mm)
.002
.295
T000.502 BATH/SHOWER Trim Kit
• Brass wall escutcheon
• Metal Lever handle
• "Vario" adjustable showerhead
• Cast Brass shower arm
• Cast Brass diverter tub spout
T480.508 BATH/SHOWER Trim Kit
• Brass wall escutcheon
• Metal lever handle
• Water Saving FloWise
Showerhead
• Turbine Spray-1.5gpm max. flow
• Angle adjustable
• Shower arm and flange
• Slip-on diverter tub spout
• LESS valve
T000.501 SHOWER ONLY Trim Kit
• Brass wall escutcheon
• Metal Lever handle
• "Vario" adjustable showerhead
• Cast Brass shower arm
T000.500 VALVE ONLY Trim Kit
• Brass wall escutcheon
• Metal Lever handle
Polished Chrome
Satin Nickel (PVD)
.002
.295
Polished Chrome
Satin Nickel (PVD)
CERAMIX
18"
(457mm)
optional
1/2" REF .
(13mm)
7" REF.
(178mm)
FINISHED WALL
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
4" REF.
(102mm)
1-5/8" TO 3-1/4"
(41mm - 83mm.)
7-1/8" REF.
(182mm)
6-11/16"
(170mm)
4-3/4"
(121mm)
5" REF.
(127mm)
TOP OF TUB RIM
4" REF.
(102 mm)
Note: Trim kits CANNOT be used
with Ceramix spool type
valves.
1-1/2 REF.
(38mm)
PRINCETON
T508.502 BATH/SHOWER Trim Kit
• Metal Lever Handle
• Wall escutcheon
• Showerhead, arm and flange
• Slip-on diverter tub spout
• LESS Valve
• Metal Lever Handle
• Wall escutcheon
• Showerhead, arm and flange
• LESS Valve
T508.501 SHOWER ONLY Trim Kit
T508.500 VALVE ONLY Trim Kit
• Metal Lever Handle
• Wall escutcheon
• LESS Valve
.002
.068
.295
Polished Chrome
Blackened Bronze
Satin Nickel (PVD)
18"
(457mm)
optional
3-5/8
(92mm)
optional
7" REF.
(178mm)
FINISHED WALL
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
4" REF.
(102mm)
5" REF.
(127mm)
TOP OF TUB RIM
4" REF.
(102 mm)
1-5/8" TO 3-1/4"
(41mm - 83mm.)
8-1/8"
(205mm)
Off
Hot
T385.522 BATH/SHOWER Trim Kit
RELIANT 3
RELIANT 3
WITH FLOWISE
SEVA
WITH FLOWISE
®
FINISHED WALL
4"
(102mm)
TOP OF TUB RIM
18"
(457mm)
optional
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
1-5/8"" TO 3-1/4"
(41mm - 83mm)
5-1/8" REF
(130mm)
9"
(228mm)
1" REF.
(25mm)
3"
(76mm)
13"
(330mm)
T385.521 SHOWER ONLY Trim Kit
T385.520 VALVE ONLY Trim Kit
• Large metal wall escutcheon
• Metal lever Loop Handle
• LESS valve
• Large metal wall escutcheon
• Metal lever Loop handle
• "Easy Clean" Showerhead
• Shower arm and flange
• LESS valve
• Large metal wall escutcheon
• Metal lever Loop handle
• "Easy Clean" Showerhead
• Shower arm and flange
• Slip-on diverter tub spout
• LESS valve
T385.522 BATH/SHOWER Trim Kit
T4 80.507 SHOWER ONLY Trim Kit
• Metal wall escutcheon
• Metal lever handle
• Water Saving FloWise
Showerhead
• Turbine Spray-1.5gpm max. flow
• Angle adjustable
• Shower arm and flange
• LESS valve
• Metal wall escutcheon
• Metal lever handle
• Water Saving FloWise
®
Showerhead
• Turbine Spray-1.5gpm max. flow
• Angle adjustable
• Shower arm and flange
• Slip-on diverter tub spout
• LESS valve
.002
.295
Polished Chrome
Satin Nickel (PVD)
.002
.295
Polished Chrome
Satin Nickel (PVD)
152mm
(6 REF.)
108mm
(4-1/4 REF.)
FINISHED WALL
4"
(102mm)
TOP OF TUB RIM
18"
(457mm)
optional
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
1-5/8"" TO 3-1/4"
(41mm - 83mm)
5-1/8" REF
(130mm)
1" REF.
(25mm)
7" REF
(178mm)
4" REF
(102mm)
T385.502 BATH/SHOWER Trim Kit
RELIANT 3
FINISHED WALL
4"
(102mm)
TOP OF TUB RIM
18"
(457mm)
optional
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
1-5/8"" TO 3-1/4"
(41mm - 83mm)
5-1/8" REF
(130mm)
6"
(153mm)
1" MIN.
(25mm)
152mm
(6 REF.)
3"
(76mm)
6"
(153mm)
T385.501 SHOWER ONLY Trim Kit
T385.500 VALVE ONLY Trim Kit
• Metal wall escutcheon
• Metal lever Handle
• LESS valve
• Metal wall escutcheon
• Metal lever handle
• "Easy Clean" Showerhead
• Shower arm and flange
• LESS valve
• Metal wall escutcheon
• Metal lever handle
• "Easy Clean" Showerhead
• Shower arm and flange
• Slip-on diverter tub spout
• LESS valve
.002
.295
Polished Chrome
Satin Nickel (PVD)
108mm
(4-1/4 REF.)
Model #
Description
Trim Kit Finishes Roughing-In Dimensions
Trim Kits for R120, R120SS, R125, R125SS, R127, R127SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min. maximum flow.
TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
PEX (STOPS) (R127SS)
52 mm
(2-1/32")
104 mm
(4-1/16")
1/2" PEX INLETS
(ASTM F1807)
165mm
(6-1/2")
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
PEX (R127)
52 mm
(2-1/32")
104 mm
(4-1/16")
1/2" PEX INLETS
(ASTM F1807)
109mm
(4-1/4")
Moments
B/S
Shower
Valve
B/S
Shower
T675.502
T675.501
T675.500
T385.502
T385.501
T385.500
T385.522
T385.521
T385.520
T480.502
T480.501
T480.500
T508.502
T508.501
T508.500
Seva
Princeton
Reliant 3
Colony
"Soft"
TRIM KITS
Reliant 3
w/mod
Plate
T480.508
T480.507
Seva
with
FloWise
T385.508
T385.507
Reliant 3
with
FloWise
T675.508
T675.507
Colony
"Soft" with
FloWise
®
T000.502
T000.501
T000.500
T506.502
T506.501
T506.500
T6282
T6281
T6280
T808.502
T808.501
T808.500
T010.502
T010.501
T010.500
B/S
Shower
Valve
Jasmine
Ceramix Standard
TRIM KITS
T005.502
T005.501
T005.500
MOMENTS
T506.502 BATH/SHOWER Trim Kit
Polished Chrome
Stainless Steel (PVD)
T506.501 SHOWER ONLY Trim Kit
.002
.075
T506.500 VALVE ONLY Trim Kit
• Brass wall escutcheon
•Adjustable “3 function”
showerhead
• Brass diverter tub spout
• LESS Valve
• Brass wall escutcheon
•Adjustable “3 function”
showerhead
• LESS Valve
• Brass wall escutcheon
• LESS Valve
5-5/8" REF.
(143mm)
BOTTOM OF TUB
74" FOR
HEAD CLEARANCE
(188cm)
FINISHED WALL
8-1/8" REF.
(216mm)
4"
(102mm)
6-1/2"
(165mm)
18"
(457mm)
OPTIONAL
TOP O F
TUB R I M
8-3/8"
(213mm)
2-3/8"
(60mm)
3/4" TO 2-3/8"
(19mm-60mm)
SH R
TU B
1-1/2" REF.
(13mm)
Green Tea
Copeland
.002
.068
.295
Polished Chrome
Blackened Bronze (PVD)
Satin Nickel (PVD)
COPELAND
TOP O F
TUB R I M
T005.502 BATH/SHOWER Trim Kit
T005.500 VALVE ONLY Trim Kit
• Metal Lever Handle
• Metal wall escutcheon
• Adjustable “3 function”
showerhead, arm and flange
• Slip-on diverter tub spout
• LESS Valve
• Metal Lever Handle
• Metal wall escutcheon
• Adjustable “3 function”
showerhead, arm and flange
• LESS Valve
• Metal Lever Handle
• Metal wall escutcheon
• LESS Valve
T005.501 SHOWER ONLY Trim Kit
FINISHED WALL
102mm
4"
BOTTOM OF TUB
1880mm
74" FOR HEAD
CLEARANCE
108mm
4-1/4" REF.
41mm TO 76mm
1-5/8" TO 3"
457mm
18" OPTIONAL
124mm
4-7/8" REF.
191mm
7-1/2"
38mm
1-1/2"
152mm
6" REF.
"SEE ILLUSTRATION "
Polished Chrome
Stainless Steel (PVD)
.002
.075
GREEN TEA
T010.501 SHOWER ONLY Trim Kit
T010.500 VALVE ONLY Trim Kit
T010.502 BATH/SHOWER Trim Kit
• Metal wall escutcheon
• 6 3/4" Rain showerhead
• Brass shower arm
• Metal diverter tub spout
• Metal Lever Handle
• LESS valve
• Metal wall escutcheon
• 6 3/4" Rain showerhead
• Brass shower arm
• Metal Lever Handle
• LESS valve
• Metal wall escutcheon
• Metal Lever Handle
• LESS valve
FINISHED WALL
102mm
4"
1880mm
74" FOR HEAD
CLEARANCE
457mm
18" OPTIONAL
191mm
7-1/2" Dia.
241mm
9-1/2" REF.
TOP OF TUB RIM
BOTTOM OF TUB
79mm
3-1/8" REF.
1-5/8" TO 3"
117mm
4-5/8" REF.
149mm
5-7/8" REF.
1/2" NPT
1/2" NPT
"SEE ILLUSTRATION "
109mm
4-3/16"
.002
.068
Polished Chrome
Satin Nickel (PVD)
COLONY SOFT
WITH
FLOWISE
T675.508 BATH/SHOWER Trim Kit
• Metal lever handle
Water Saving FloWise
®
Showerhead
• Turbine Spray - 1.5gpm max. flow
• Angle adjustable
• Showerhead, arm and flange
• Diverter tub spout
• Less valve
T675.507 SHOWER ONLY Trim Kit
• Metal lever handle
Water Saving FloWise
Showerhead
• Turbine Spray - 1.5gpm max. flow
• Angle adjustable
• Showerhead, arm and flange
• Less valve
Seva
Jasmine
Green Tea
StandardMoments
FINISHED WALL
4"
(102mm)
TOP OF TUB RIM
18"
(457mm)
optional
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
(188cm)
1-5/8"" TO 3-1/4"
(41mm - 83mm)
5-1/8" REF
(130mm)
1" REF.
(25mm)
7" REF
(178mm)
4" REF
(102mm)
6"
(153mm)
3"
(76mm)
6"
(153mm)
8"
(203mm)
7-1/8"
(181mm)
4-1/2"
(113mm)
  • Page 1 1
  • Page 2 2

American Standard R127SS User manual

Category
Faucets
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI