BT 4100 User manual

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

User Guide

BT SYNERGY 4100

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

•

255 Name and number phonebook to store all

your contact numbers for easy dialling.

•

Copy the whole phonebook or individual entries to

and from your mobile phone SIM card.

•

Send and receive text messages*.

•

Caller Display lets you see who’s calling and your phone

stores details of the last 50 callers in a Calls list*.

•

With Call Waiting*, when you are on a call a soft beep

alerts you to another waiting call.

•

Register up to 5 handsets to the base without the need

for additional wiring.

•

Digital call quality with a range of up to 300 metres

outdoors and up to 50 metres indoors (in ideal

conditions).

Welcome…

to your BT Synergy 4100

Digital Cordless Telephone

* You must subscribe to your network provider’s Caller Display or Call Waiting service for these

features to work. A quarterly fee may be payable.

Please note that this equipment is not designed for making emergency telephone calls when

the power fails. Alternative arrangements should be made for access to emergency services.

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

This User Guide provides you with all

the information you need to get the

most from your phone.

Before you make your first call you will

need to set up your phone. Follow the

simple instructions in ‘Getting Started’,

on the next few pages.

Need help?

If you have any problems setting up or using your

BT Synergy 4100 please contact the Helpline on

0870 605 8047 or email [email protected].

Alternatively, you may find the answer in ‘Help’ at the

back of this guide.

Got everything?

•

BT Synergy

4000 handset

•

BT Synergy

4100 base

•

2 x AAA NiMH

rechargeable

batteries

•

Base mains

power adaptor

(item code

032763)

•

BT Synergy

telephone line

cord

If you have purchased

a BT Synergy 4100 multiple

pack you will also have the

following items for each handset:

•

BT Synergy

4000 additional

handset

•

BT Synergy

4000 charger

•

2 x AAA NiMH

rechargeable

batteries

•

Mains power

supply for

charger (item

code 032765)

IMPORTANT

Only use the telephone line

cord supplied

Getting started

Location . . . . . . . . . . . . . . . . . . . . . . .7

Setting up . . . . . . . . . . . . . . . . . . . . . .7

Setting up for multiple packs . . . . . . . .8

Getting to know your phone

Handset buttons . . . . . . . . . . . . . . . . .10

Handset display icons . . . . . . . . . . . . .11

Base buttons and LEDs . . . . . . . . . . . .12

Navigating the menus . . . . . . . . . . . . .13

Character map . . . . . . . . . . . . . . . . . .13

Menu map . . . . . . . . . . . . . . . . . . . . . .14

Using the phone

Switch the handset power on/off . . . . .15

Make an external call . . . . . . . . . . . . . .15

Preparatory dialling . . . . . . . . . . . . . . .15

End a call . . . . . . . . . . . . . . . . . . . . . .15

Receive a call . . . . . . . . . . . . . . . . . . . .16

Earpiece volume . . . . . . . . . . . . . . . . .16

Secrecy . . . . . . . . . . . . . . . . . . . . . . . .17

Handsfree . . . . . . . . . . . . . . . . . . . . . .17

Redial the last number called . . . . . . . .18

Redial a number from the redial list . . .18

Copy a number from the redial list . . . .19

Delete a redial number . . . . . . . . . . . .19

Delete all redial numbers . . . . . . . . . .20

Keypad lock . . . . . . . . . . . . . . . . . . . . .20

Paging . . . . . . . . . . . . . . . . . . . . . . . . .20

255 Name and number phonebook . . .21

Store a name and number . . . . . . . . . .21

View/check details for an entry . . . . . .22

Dial an entry . . . . . . . . . . . . . . . . . . . .22

Edit a name and number . . . . . . . . . . .23

Delete a name and number . . . . . . . . .23

Copy an entry to another handset . . . .24

Copy the entire phonebook to another

handset . . . . . . . . . . . . . . . . . . . . . . . .25

Copy to or from a SIM card . . . . . . . . .26

Access code . . . . . . . . . . . . . . . . . . . . .28

Change the SIM code . . . . . . . . . . . . .28

Handset settings

Handset ringer volume . . . . . . . . . . . .29

Handset ringer melody . . . . . . . . . . . .29

Handset earpiece volume . . . . . . . . . .30

Auto answer . . . . . . . . . . . . . . . . . . . .31

Handset name . . . . . . . . . . . . . . . . . . .31

Display language . . . . . . . . . . . . . . . . .32

Warning tones . . . . . . . . . . . . . . . . . . .32

Base settings

Base ringer volume . . . . . . . . . . . . . . .34

Base ringer melody . . . . . . . . . . . . . . .34

PIN code . . . . . . . . . . . . . . . . . . . . . . .35

Dial mode . . . . . . . . . . . . . . . . . . . . . .35

4

In this guide

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

5In this guide

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

Restore default settings . . . . . . . . . . . .36

Default settings . . . . . . . . . . . . . . . . . .37

Date and time settings

Set the time . . . . . . . . . . . . . . . . . . . .38

Set the date . . . . . . . . . . . . . . . . . . . .38

Set the alarm . . . . . . . . . . . . . . . . . . . .39

Silence the alarm . . . . . . . . . . . . . . . .39

BT Calling Features

Caller Display . . . . . . . . . . . . . . . . . . .40

Call list . . . . . . . . . . . . . . . . . . . . . . . .40

View and dial from the Calls list . . . . . .40

Copy a Calls list number

to the phonebook . . . . . . . . . . . . . . . .41

Delete a Calls list number . . . . . . . . . .42

Delete the whole Calls list . . . . . . . . . .42

Call Waiting . . . . . . . . . . . . . . . . . . . . .43

Voice Mail/Message Waiting . . . . . . . .44

Text Messaging

Subscribe to the text messaging

service . . . . . . . . . . . . . . . . . . . . . . . . .45

Cost of the fixed line service . . . . . . . .45

Send a text message . . . . . . . . . . . . . .46

Entering text . . . . . . . . . . . . . . . . . . . .49

Standard text entry . . . . . . . . . . . . . . .50

Writing tips for standard text entry . . .50

Receiving and reading text messages . .51

Read, edit, send texts stored in

the outbox . . . . . . . . . . . . . . . . . . . . .54

Service Centre numbers . . . . . . . . . . . .55

Adding or changing Service

Centre numbers . . . . . . . . . . . . . . . . . .56

Select a Send Service Centre number . .57

Message alert beeps . . . . . . . . . . . . . .58

User Areas . . . . . . . . . . . . . . . . . . . . . .58

Set a user area . . . . . . . . . . . . . . . . . .59

How callers send a text to a user area .60

Open a user area . . . . . . . . . . . . . . . . .60

Edit a user area . . . . . . . . . . . . . . . . . .61

Delete a user area . . . . . . . . . . . . . . . .62

Check the list of sub addresses . . . . . .62

Check the common box sub address . .63

Change auto save setting . . . . . . . . . .64

Using additional handsets

Registering your handset . . . . . . . . . . .65

Select a base . . . . . . . . . . . . . . . . . . . .66

De-register a handset . . . . . . . . . . . . .67

Internal calls . . . . . . . . . . . . . . . . . . . .67

Transferring calls . . . . . . . . . . . . . . . . .68

3-Way Call . . . . . . . . . . . . . . . . . . . . . .68

Help . . . . . . . . . . . . . . . . . . . . . . . . . .70

General information

Replacing the handset batteries . . . . . .76

Safety information . . . . . . . . . . . . . . . .76

Cleaning . . . . . . . . . . . . . . . . . . . . . . .77

Environmental . . . . . . . . . . . . . . . . . . .77

Product disposal instructions . . . . . . . .77

Guarantee . . . . . . . . . . . . . . . . . . . . . .78

Returning your phone . . . . . . . . . . . . .78

How many telephones can I have? . . . .78

R&TTE . . . . . . . . . . . . . . . . . . . . . . . .79

Declaration of Conformance . . . . . . . .79

Connecting to a switchboard . . . . . . . .80

Inserting a pause . . . . . . . . . . . . . . . . .80

Recall . . . . . . . . . . . . . . . . . . . . . . . . .80

6 In this guide

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

Location

You need to place your BT Synergy 4100 within 2 metres

of the mains power socket and telephone socket so that

the cables will reach.

Make sure it is at least 1 metre away from other

electrical appliances to avoid interference.

Your BT Synergy 4100 works by sending radio signals

between the handset and base. The strength of the

signal depends on where you site the base. Putting it as

high as possible ensures the best signal.

Setting up

1. Push the mains power cord into the underside of the

base until you hear it click into place and connect the

other end into the mains power wall socket. The green

Power/In use light comes on.

WARNING

Do not place your BT Synergy 4100

in the bathroom or other humid

areas.

Handset range

The BT Synergy 4100 has a range

of up to 300 metres outdoors

when there is a clear line of sight

between the base and handset.

Any obstruction between the base

and handset will reduce the range

significantly. With the base indoors

and handset either indoors or

outdoors, the range will normally

be up to 50 metres. Thick stone

walls can severely affect the range.

Signal strength

The icon on your handset

indicates when you are in range.

When you move out of range of the

base, the out of range tone will

sound every minute. This tone is

repeated until you move back into

range.

IMPORTANT

The base station must be plugged

into the mains power socket at all

times. Do not connect the telephone

line until the handset is fully charged.

Only use the power and telephone

cables supplied with the product.

Which socket?

Power socket

Telephone line socket

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

Getting started

7

Power adaptor cable

2. Rechargeable batteries are already fitted in your

handset. To activate the batteries, pull the plastic tab

away from the bottom of the handset as shown.

3. Place the handset on the base to charge for at least 24

hours. The red Charging light comes on. When the

handset is fully charged the display shows the symbol.

4. After 24 hours, plug one end of the telephone line cord

into the socket marked on the underside of the base

and the other end into the telephone wall socket.

Only use the telephone line cord supplied.

Setting up for multiple packs

If you have purchased a BT Synergy 4100 multiple pack,

you will also need to follow the instructions shown below

to prepare any additional handsets and chargers for use.

For each additional handset and charger:

1. Connect the power adaptor with the red connector to the

charger and switch on.

If you have purchased a multiple

handset pack, you should use the

mains power adaptor with the

clear connector for the base.

The power adaptor(s) with the red

connector is for the chargers(s).

The red Charging light stays on

even when the batteries are fully

charged.

Talk/Standby time

In ideal conditions, fully charged

handset batteries should give up to

10 hours talk time or up to 100

hours standby time on a single

charge. The base must remain

plugged in to the mains and

switched on at all times.

Note that new batteries do not

reach full capacity until they have

been in normal use for several days.

Battery low warning

If the symbol flashes in the

display and you hear a warning

beep every 10-15 seconds, you

will need to recharge the handset

before you can use it again.

During charging, the symbol

will scroll in the display.

8 Getting started

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

PULL

Rechargeable batteries

already fitted

Remove this tab and

charge batteries for 24

hours before use

2. Rechargeable batteries are already fitted in your

handset. To activate the batteries, pull the plastic

tab away from the bottom of the handset as shown

previously.

3. Place the handset on the charger and charge for at least

24 hours. The red charging light will come on.

Your BT Synergy 4100 additional handset comes pre-

registered to the base. The handset number will be

shown on the display.

Your BT Synergy 4100 is ready for use.

9Getting started

Battery performance

To keep your batteries in the best

condition, leave the handset off

the base for a few hours at a time.

Running the batteries right down

at least once a week will help them

last as long as possible.

The charge capacity of

rechargeable batteries will reduce

with time as they wear out, giving

the handset less talk/standby time.

Eventually they will need to be

replaced. New batteries are

available from the BT Synergy

4100 Helpline on 0870 605 8047.

For instructions on how to install

new batteries, see page 75.

After charging your handset for the

first time, subsequent charging

time is about 6–8 hours a day.

Batteries and handset may become

warm during charging. This is

normal.

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

Power adaptor cable

13

46

7

R

Int

LNR

9

2

5

8

0

Menu

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

Getting to know your phone

10

Option button (middle)

In standby or talk mode, press to

open the Phonebook,

page 21.

Option button (left)

In standby or talk mode, when the

symbol is displayed, press to open

the Calls list,

page 40.

In menu mode, press to go back to

the previous screen.

Menu/Volume +/Scroll Up

In standby mode, press to access

and scroll through the menu

options,

page 13.

In talk mode, press to increase the

handset earpiece volume,

page 16.

Use to scroll up through the

phonebook and Calls list

.

Talk / Handsfree

In standby mode, press to make or

receive calls,

page 15.

In talk mode, use to switch

handsfree on and off,

page 17.

Recall/Call Waiting/Intercom

For use with a switchboard/PBX

and BT Calling Features.

For use with Call Waiting,

page 43.

In standby mode, use to make an

internal call,

page 67.

Handset buttons

Calls light

Illuminates when the line is in use.

Flashes when receiving a call.

Display with backlight

Option button (right)

In talk mode, press to switch

mute on/off,

page 17.

In menu mode, press to confirm

a displayed option.

End call/ Delete/Keypad lock

In talk mode, press to end a call,

page 15.

In entry mode, press to delete

digits.

In menu mode, press and hold to

exit and return to standby

page 13.

In standby mode, use to lock the

keypad,

page 20.

Calls/V

olume -/Scroll Down

In standby mode, press to access

and scroll through the menu

options,

page 13.

In talk mode, press to decrease the

handset earpiece volume,

page 16.

Use to scroll down through the

phonebook and Calls list

.

Keypad

Use to enter digits and characters.

Last number redial/Pause

In standby mode, use to redial any of

the last 20 numbers called,

page 18.

In talk mode, press to enter a pause

in a number,

page 80.

11Getting to know your phone

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

Battery levels

Shows handset battery status.

Scrolls when the handset is

charging in the base.

Phonebook

Select icon to view the

phonebook.

Calls list*

Flashes to indicate new Calls

list entries.

Envelope

Flashes to indicate new text

messages in the Inbox.

Range

Displayed in standby mode to

indicate handset is in range of

the base. Flashes if you go out

of range.

Keypad lock

Displayed when the keypad is

locked.

Handset Ext

Displayed when an external

call is being received or in

progress.

Handset Int

Displayed when an internal

call is being received or in

progress.

Handsfree Speaker

Displayed when in handsfree

mode.

Alarm Bell

Displayed when an alarm is

set.

Handset display icons – These are the symbols you will see on your handset’s screen.

* For these features to work you must subscribe to your Network Provider’s Caller Display* and/or Call Waiting* service. A quarterly fee may be payable.

Time

Shows the time in hours and minutes.

Date

Shows the date in day/month format.

Handset name

The handset name is

displayed in standby mode.

Handset number

The handset number

is displayed in standby

mode.

Number of Calls list* entries

Displays the number of

unanswered calls.

BT Synergy

15

1

12 Getting to know your phone

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

Find Handset/Page

Press to find/page handset(s),

page 20.

SIM Reader

Insert your mobile phone

SIM card here to copy to and

from the phonebook, page 26.

Charging light (RED)

Comes on when the handset

is charging on the base.

Power/In use light (GREEN)

On when the power is on.

Flashes when the handset is in use.

Base buttons and LEDs

Menu

Navigating the menus

Your BT Synergy 4100 has an easy to use menu system.

Each menu has a list of options, which you can see on

the menu map on the following page.

When the handset is switched on and in standby:

1. Press or to open the main menu then press

or

repeatedly to scroll to the menu option you

want.

2. Press the

OK option button to select a menu option

or the

Back option button to go back to the

previous screen.

Character map

The following table shows you where each letter and

punctuation character can be found. This will be helpful

when storing a name in the phonebook, see page 21.

M

enu

Menu

M

enu

M

enu

13Getting to know your phone

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

Exit or go back one level

in the menu

Press

to go back one level.

Press and hold to return to

standby.

If no buttons are pressed for 30

seconds, the handset reverts to

standby automatically.

Option buttons

Press to select the option

displayed on the screen.

Button Upper case Lower case

1@$¥∑€%/◊ 1@$¥∑a%/

°

ABC2ÄÅÆ abc2äàåæç

DEF3É∆ def3èé

GHI4 I ghi4i

JKL5 jkl5

MNO6ÑÖO mno6ñöo

6

5

4

3

2

1

Button Upper case Lower case

PQRS7

π

U

I ∑ pqrs7

TUV8

Ü0

.

tuv8úü

WXYZ9 wxyz9

0

!?¡¿&§ 0!?¡¿&§

*

.,”’:;+-=<>

*

.,”’:;+-=<>

#()[]{}_\|~^ #()[]{}_\|~^

0

9

8

7

Menu map

14 Getting to know your phone

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

TXT Menu

Write Message

Inbox

Outbox

TXT Settings -

Server number

Server Activation

Sub Address

Checking

Message Alert

Common Box

Sub Address

User Boxes Settings

Send Option Save

Handset Settings

Handset Ringer Volume

Handset Ringer Melody

Handset Ear Volume

Auto Answer

Handset Name

Language

Warning Tones

Base Settings

Base Ringer Volume

Base Ringer Melody

PIN Code

Dial Mode

Restore Settings

Date & Time Settings

Set Date

Set Time

Set Alarm

Registration

Register Base

Select Base

De-Register Handset

Add entry Copy from SIM* Access Code

Phonebook menu

Add entry Show Details Edit Entry Delete Entry Copy Entry Copy Phonebook SIM Copy* Access Code SIM code*

Phonebook menu

No entries stored:

Entries stored:

*

To be able to use this feature, you must ensure that your mobile phone SIM card is inserted into the SIM reader slot on your BT Synergy 4100.

Switch the handset power on/off

Press and hold to switch off.

Press to switch back on.

Make an external call

1. Lift the handset and press . The icon is displayed.

2. When you hear the dialling tone, dial the telephone

number you want.

Preparatory dialling

1. Enter the number first. If you make a mistake, press

to delete the last digit.

2. Press to dial.

End a call

1. Press .

Or

Place the handset back on the base/charger.

LNR

When you make a call, the Calls

light on the handset comes on and

the In Use light on the base

flashes.

Call timer

Your handset will automatically

time the duration of all external

calls. The handset display shows

the call duration both during and

for a few seconds after your call.

Press to delete any incorrect

digits

The symbol on the display

indicates when you are in range of

the base. If the symbol flashes and

you hear a warning beep, you are

out of range and will need to move

closer to the base.

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

Using the phone

15

Caller Display

If you have subscribed to your

network’s Caller Display service,

the caller’s number (or name

if stored in the phonebook) is

displayed. See page 40 for

more information.

Auto answer

As long as you have auto answer

set to ON you can just pick the

handset up off the base/charger to

answer a call. If you have switched

it off, you will need to press .

Auto answer ON is the default

setting.

Receive a call

When you receive a call, the phone rings and the Calls

light on the handset flashes. The or symbol

flashes in the display to let you know if it is an external

or internal call.

1. If your handset is on the base, pick it up to answer the call.

Or

If your handset is off the base, press .

Earpiece volume

During a call you can adjust the volume of the

earpiece/handset receiver.

1. Press or to increase or decrease the volume.

As you increase or decrease the volume, the boxes on

the display show the volume level.

Maximum volume

Mid volume

Minimum volume

Menu

16 Using the phone

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

Secrecy

During a call, you can talk to someone nearby without

your caller hearing.

1. Select

Sec option.

Secrecy On

appears in the display and

your caller cannot hear you.

2. Select

Off option to return to your caller.

Handsfree

Handsfree lets you talk to your caller without holding the

handset. It also enables other people in the room to

listen to your conversation over the loudspeaker.

Make a call in handsfree

1. Dial the number then press .

2. Press again. The icon is displayed and you hear

your call over the loudspeaker.

3. Press to end the call.

Answer a call in handsfree

When the phone rings:

1. Press

twice. The call is transferred to the loudspeaker.

17Using the phone

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

During a handsfree call, press

or to change the volume.

To switch handsfree off and return

to the handset at any time, press

.

Menu

If the number is stored in the

Directory and a name/number

match is found, the name will be

displayed instead.

Redial numbers can be up to 32

digits long.

Switch to handsfree during a call

During a call:

1. Press . The call is transferred to the loudspeaker.

2. Press to end the call.

Redial

The last 20 telephone numbers called are saved to a

redial list. You can then select any of the numbers to

redial, delete or copy to the phonebook.

Redial the last number called

1. Press , wait for the dialling tone then press .

The last number you called is displayed and dialled.

Redial a number from the redial list

1. Press . The last number called is displayed.

2. Use or to scroll through the redial list to the

number you want.

3. Press to redial.

Menu

LNR

18 Using the phone

Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

Press to delete any unwanted

digits and then enter new ones

using the keypad.

You will not be able to copy a

number to the phonebook if the

phonebook is already full. If you try

to, the display will show

BT 4100 User manual

BT 4100 User manual

Related papers

Other documents