Creative Hexadome M Building Instructions
- Type
- Building Instructions
Hexadome M
Installation
Version 3.1
3 | 322 | 32
Hexadome M
Building instructions
www.creative-products.nl
Hexadome M
Building instructions
www.creative-products.nl
CS-0447
Sub frame
center
CS-0058
Foot connector
Left
1x
6x
6x
6x
18x
6x
6x
6x
6x
12x
6x
6x
2x
40x 140x 190x
6x
6x
12x
6x
12x
6x
12x
CS-0465
Sub frame beam
ø70 mm - 113 cm
CS-0108
Foot connector
Right
CS-0460
Upper main
prole ø90 mm - 118 cm
CS-0099
Anchor slide
CS-0466
Upper
X-connector
CS-0148
Anchor support
CS-0468
T- Connector Upper Left
Marked with “UL”
CS-0475
Tension cable
CS-0463
Upper (long)
sub prole ø70 mm - 175 cm
CS-0476
Positioning
cable
CS-9013
Rope 25 m.
CS-0105
Locking pin (small)
ø70 mm prole
CS-0093
Locking pin (medium)
ø90 mm prole
CS-0467
Lower
X-connector
CS-0236
Ratchet plate
CS-9009
Turn buckle
CS-0469
T- Connector Lower Left
Marked with “LL”
CS-0473
Upper cable
CS-0472
T- Connector Lower Right
Marked with “LR”
CS-0474
Center cable
Hexadome Medium
BOX CONTENTS
CS-0248
Securing ring
6x
6x
CS-0464
Lower (short)
sub prole ø70 mm - 98 cm
CS-0471
T- Connector Upper Right
Marked with “UR”
6x
CS-0336
Sub frame
connector
6x
CS-0337
Locking strip
6x
CS-0497
Pull bar
1x
CS-9012
Big Bag
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏ ❏ ❏ ❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
2x CS-9037
Strap 4 m.
❏
36x CS-0462
Lower Main
prole ø90 mm - 208 cm
❏
2x CS-0233
Transportbox
M
5 | 324 | 32
Hexadome M
Building instructions
www.creative-products.nl
Hexadome M
Building instructions
www.creative-products.nl
Pre-assemble the lower sub proles (6x) Pre-assemble the upper sub proles (6x)
STEP 1 STEP 2
!
Curvature has to point backwards
LL
LR
Lower (short) sub prole
CS-0464
T-Connector Lower Right
Marked with “LR”
CS-0472
T-Connector Lower Left
Marked with “LL”
CS-0469
Locking pin (short)
CS-0105
2x
Securing ring
CS-0248
2x
Upper (long) sub prole
CS-0463
T-Connector Upper Right
Marked with “UR”
CS-0471
T-Connector Upper Left
Marked with “UL”
CS-0468
UL
UR
Locking pin (short)
CS-0105
2x
Securing ring
CS-0248
2x
!
Curvature has to point backwards
7 | 326 | 32
Hexadome M
Building instructions
www.creative-products.nl
Hexadome M
Building instructions
www.creative-products.nl
Pre-assemble the sub frame Assemble the frame body
STEP 3 STEP 4
!
Secure all parts with locking pins
(short version) and securing rings
Sub frame center
CS-0447
Sub frame beam
CS-0465
6x
Sub frame connector
CS-0336
6x
Upper main prole
CS-0460
4x
Upper X-connector
CS-0466
3x
Upper X-connector
CS-0466
3x
Upper main prole
CS-0460
2x
!
Curvature has to point upwards
!
Secure all parts with locking pins
(long version) and securing rings
!
Hooks have to point inwards
9 | 328 | 32
Hexadome M
Building instructions
www.creative-products.nl
Hexadome M
Building instructions
www.creative-products.nl
!
Secure all parts with locking pins
(long version) and securing rings
Mount the sub frame at the frame body
STEP 5
Locking strip
CS-0337
6x
Securing ring
CS-0248
6x
11 | 3210 | 32
Hexadome M
Building instructions
www.creative-products.nl
Hexadome M
Building instructions
www.creative-products.nl
!
Note: this lifting methode
requires more height for building
LIFTING
While building, the structure has to be lifted multiple times so that the assembly can easily be done on oor
level. The structure is designed for two lifting methods:
1. Lifting from below (for example with a traverse lift) by using the subframe. Requirements lifting device:
• minimum lifting height: 6,5 meter
• minimum save working load: 500kg (without suspended loads)
2. Lifted from the top (for example with a crane ) by using lifting slings (2 meter, 1000 KG) and the hook of the
X-connectors
Assemble the remaining upper main proles and Lower X-connectors
STEP 6
Upper main prole
CS-0460
Lower X-connector
CS-0467
Upper main prole
CS-0460
!
!
Rotate prole clockwise to
create space for assembly
Do not secure yet
13 | 3212 | 32
Hexadome M
Building instructions
www.creative-products.nl
Hexadome M
Building instructions
www.creative-products.nl
!
Secure all parts with locking pins
(long version) and securing rings
Repeat this step for the other ve sides
!
Rotate prole counter clockwise
and push the X-connector slowly
in the proles
Upper cable
CS-0473
12x
Mount the rst end of the upper cables
STEP 7
!
Use the two inner eyes of
the X-connector
15 | 3214 | 32
Hexadome M
Building instructions
www.creative-products.nl
Hexadome M
Building instructions
www.creative-products.nl
Mount the rst end of the 12 center cables Mount the rst end of the center cables
STEP 8 STEP 9
Center cable
CS-0474
12x
Lower Main prole
CS-0462
12x
!
Secure all parts with locking pins
(long version) and securing rings
17 | 3216 | 32
Hexadome M
Building instructions
www.creative-products.nl
Hexadome M
Building instructions
www.creative-products.nl
Mount the upper sub proles (6x) Mount the second end of the 12 upper cables
STEP 10 STEP 11
UL
UR
!
!
!
Curvature sub proles
has to point inwards
Secure all parts with locking pins
(long version) and securing rings
When crossing other cables, place the cable
above the rst crossing cable and below
the next crossing cable(s)
19 | 3218 | 32
Hexadome M
Building instructions
www.creative-products.nl
Hexadome M
Building instructions
www.creative-products.nl
Mount the rst end of the 12 tensioning cables Mount the second level of main proles
STEP 12 STEP 13
Tension cable
CS-0475
12x
Lower Main prole
CS-0462
12x
!
Secure all parts with locking pins
(long version) and securing rings
21 | 3220 | 32
Hexadome M
Building instructions
www.creative-products.nl
Hexadome M
Building instructions
www.creative-products.nl
Mount the lower sub proles (6x) Mount the second end of the center cables
STEP 14 STEP 15
LL
LR
!
Secure all parts with locking pins
(long version) and securing rings
!
Curvature sub proles
has to point inwards
23 | 3222 | 32
Hexadome M
Building instructions
www.creative-products.nl
Hexadome M
Building instructions
www.creative-products.nl
Mount last level of main proles Mount the feet (6x)
STEP 16 STEP 17
Lower Main prole
CS-0462
v 12x
!
Secure all parts with locking pins
(long version) and securing rings
Foot connector
Left
CS-0058
Foot connector
Right
CS-0108
Anchor slide
CS-0099
Anchor support
CS-0148
!
Secure the Foot connectors with locking
pins (long version) and securing rings
!
Hooks have to point to
the inside of the structure
!
Secure the Anchor slides with locking
pins (long version) and securing rings
25 | 3224 | 32
Hexadome M
Building instructions
www.creative-products.nl
Hexadome M
Building instructions
www.creative-products.nl
Positioning cable
CS-0476
6x
Mount the positioning cables Anchor the structure
STEP 18 STEP 19
!
The positioning cables are used to secure an acurate distance between the feet.
After mounting the positioning cables the structure can be placed on its feet
Pull the legs of the structure outwards to put the positioning cables under tension
Remove the positioning cables after anchoring
!
For the dierent anchoring options
and instructions see the anchoring guide
27 | 3226 | 32
Hexadome M
Building instructions
www.creative-products.nl
Hexadome M
Building instructions
www.creative-products.nl
Mount and tension the 12 tension cables Place the cover over the structure
Place the pull bars in the loops of the cover corners
STEP 20 STEP 21
STEP 22
By tensioning the tension cables all the cables in the structure get tensioned and the structure gets its rigidity The included rope can be used to pull the cover
over the structure
!
Do not place the cover in
windy conditions or take decent
security measures
Pull bar
CS-0489
!
Use the inner hooks
29 | 3228 | 32
Hexadome M
Building instructions
www.creative-products.nl
Hexadome M
Building instructions
www.creative-products.nl
Tension the cover at the corners Tension the contours of the cover with the turn buckles
STEP 23 STEP 24
Use the seams of the cover to align the cover with the structure
Ratchet plate
CS-0236
Turn buckle
CS-0490
8x
31 | 3230 | 32
Hexadome M
Building instructions
www.creative-products.nl
Hexadome M
Building instructions
www.creative-products.nl
If necessary use the lashings to shape the corners Mount the side panels (if desired)
Mount the connection gutter (if desired)
STEP 25 STEP 26
STEP 27
Close the zippers from right to left, seen from the inside of the structure
Connection gutter
CS-0279
1. Hang the side panel under the cover openings using the 5 hooks on the upper contour
2. Close the zipper from right to left, seen from the inside of the structure. The 5 hooks now can
be demounted
3. Tension the side panel with the lashings at the bottom. Tension the outer lashings to the struc-
ture feet and the inner lashings to the ground
Inside
Side panel
CS-0402
!
For the dierent achoring options and
instructions see the anchoring guide
!
The walls must be closed during
stormy weather
Installation movie
Crossover L
Installation movie
Lounger L
Installation movie
Hexadome L
Installation movie
Hexadome M
Installation movie
Crossover M
Installation movie
Lounger M
Gewenten 43a
4704 RE Roosendaal
The Netherlands
T +31 (0)165 51 07 77
CS BI HDM V3.1
info@creative-products.nl
www.creative-products.nl
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
Creative Hexadome M Building Instructions
- Type
- Building Instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Creative Crossover L Building Instructions
-
Creative Labs WP-250 Specification
-
-
-
-
-
Creative Labs MegaWorks THX 5.1 550 User manual
-
-
-
Other documents
-
Hampton Bay 46240-300PS User manual
-
Creative XP GlassOwl Night Vision Binoculars User manual
-
Cambridge SoundWorks PD200 V2 User manual
-
-
-
Gima 33261 Use And Maintenance Book
-
Sealey ATD25301 User guide
-
Creative XP TRAIL CAM PRO 3 User manual
-
Sealey TDRWA User manual
-
Sealey TD Series Operating instructions
