Bluetooth quick start guide
for models DS6311/DS6321/DS6322
Pair your rst Bluetooth cell phone
Before you begin, make sure you have cellular
coverage and your Bluetooth enabled cell phone
is not connected to any other Bluetooth device.
To pair and connect your rst Bluetooth cell phone:
Press .
Press to highlight
Press then press to highlight
Press . The screen displays
Press . The screen displays
Press to set the telephone base
to discoverable mode.
Then, promptly turn on the Bluetooth
feature of your cell phone and search
for or add new devices.
Once your cell phone nds your VTech phone, press
the appropriate key on your cell phone to continue the
pairing process.
Enter the PIN of the telephone base (the default PIN is
0000) into your cell phone .
1.
2.
3.
4.
5.
6.
7.
8.
Ans. system
Directory
Call log
Intercom
Bluetooth
ADD CELLULAR
Place cell
phone next to
base.
Press SELECT
BLUETOOTH
Download dir
Add cellular
Add headset
Active devices
Base name:
VTech DS6321
PIN:0000
Please set your
cell phone to
search for
devices, then
press SELECT
Refer to your user’s manual for complete feature instructions.
The pairing process may take up to one minute. If the pairing
process fails, try again.
If you put the handset back in the telephone base or charger
while pairing, the process stops and the handset returns to
idle mode.
•
•
•
Pair your rst Bluetooth headset
Before you begin, make sure your Bluetooth
enabled headset is not connected to any other
Bluetooth device.
Bluetooth headsets can only be used for calls on the
home line.
To pair and connect your rst Bluetooth headset:
Press .
Press to highlight
Press then press to highlight
Press . The screen displays
1.
2.
3.
4.
Ans. system
Directory
Call log
Intercom
Bluetooth
ADD HEADSET
Place Bluetooth
headset next to
base.
Press SELECT
BLUETOOTH
Download dir
Add cellular
Add headset
Active devices
Bluetooth setup
To use a Bluetooth enabled cell phone or headset with
your DS6311/6321/6322, you must rst pair and connect
your Bluetooth device(s) with the telephone base. All
DS6311/6321/6322 handsets can be used to make or
answer calls on the cell phone line.
Bluetooth wireless technology operates within a short range
(a maximum of approximately 30 feet). When you pair a
Bluetooth cell phone or Bluetooth headset to the telephone
base, make sure your Bluetooth device is close to the
telephone base to maintain sufcient signal strength.
Keep your Bluetooth device close
to the telephone base to maintain a
reliable connection.
When successfully connected, the handset displays
The corresponding device light (DEVICE1 or DEVICE2)
on the telephone base turns on.
If you have trouble pairing your cell phone, it may not
be compatible with your DS6311/6321/6322. Check the
Bluetooth compatibility list at www.vtechphones.com.
9.
The steps for the pairing process may vary for different cell
phones. If this happens, follow the prompts on your cell phone
and your DS6311/6321/6322 to complete the pairing process.
Refer to the user’s manual of your cell phone on how to search
for or add a new Bluetooth device.
•
•
Cellular setup
completed
Device
connected
HANDSET X
12:30pm 12/25
1
Paired with
Cellular
g
g
i
i
96-007677-010-100
The Bluetooth
®
word mark and logos are owned by Bluetooth
SIG, Inc. and any use of such marks by VTech Holdings
Limited is under license. VTech Holdings Limited is a member
of Bluetooth SIG, Inc. Other trademarks and trade names are
those of their respective owners.
Copyright © 2010 for VTECH TELECOMMUNICATIONS LTD.
Place your cell phone next to the telephone base when you
download a cell phone directory to your DS6311/6321/6322.
Make sure the cell phone is paired to your DS6311/6321/6322,
on the active devices list and connected to the base before
you download a cell phone directory.
For certain cell phones, you may need to press a key on your
cell phone to conrm the directory download.
•
•
•
Download directory
You can download up to four cell phone directories to your
DS6311/6321/6322 via Bluetooth wireless technology.
To download a cell phone directory:
Press .
Press to highlight
Press .
Press to select a desired device
(if necessary), then press .
Press to highlight any one option:
1.
2.
3.
4.
5.
Ans. system
Directory
Call log
Intercom
Bluetooth
BLUETOOTH
Download dir
Add cellular
Add headset
Active devices
SELECT DEVICE
Cell Phone A
Cell Phone BC
Cell phone A
Downloading
entry #XXXX...
Download ended
Total #XXXX
entries saved.
Press SELECT
DOWNLOAD FROM
Phone memory
SIM card only
Phone and SIMs
Press . The screen displays
Set your headset to discoverable mode (refer to the user’s
manual of your headset).
Press to search for your headset.
Once the telephone base nds your
headset , press .
Enter the PIN of your headset. The PIN
for most Bluetooth devices is 0000
(refer to the user’s manual of your
headset).
Press . The handset displays
Press . When successfully connected, the
handset displays
The corresponding device light (DEVICE1 or DEVICE2)
on the telephone base turns on.
If you have trouble pairing your headset, it may not be
compatible with your DS6311/6321/6322. Check the
Bluetooth compatibility list at www.vtechphones.com.
5.
6.
7.
8.
9.
10.
11.
Headset A
paired to base.
Connect now?
Press SELECT
Searching for
Bluetooth
headsets...
ADD HEADSET
Enter PIN:
----
FOUND DEVICES
Headset A
Headset B
Press .
During the download process, the
handset displays the progress.
All other idle system handsets
display Cell line in use.
When the downloading process is
complete, the handset displays
Press or to return to the download
directory menu.
6.
7.
8.
Please set your
headset to
discoverable
mode, then
press SELECT
Headset setup
completed
Device
connected
HANDSET X
12:30pm 12/25
2
g
-
1
-
2
