Hunter Fan 50081 Owner's manual

Brand: Hunter Fan

Model: 50081

Type: Owner's manual

This manual is also suitable for

50080
50880

Hunter Fan 50081 is an elegant ceiling fan with a powerful motor that can provide ample airflow and comfort to your living space. It features three blades with a stylish design that complements various home décor styles.

www.ventiladoreshunter.com.br

MD518-01 • 10/06/14 • © Hunter Fan Company

ENGLISH

Important Instructions: Keep Instructions for future use

www.hunterfan.com.br

MD518-01 • 10/06/14 • © Hunter Fan Compan

PAG E

30 inches

7 feet

PAG E

What to Expect with

Your Installation

Ceiling Bracket

Ladder

PAG E

Tools Needed

Table of Contents

Mounting Options

PAG E

Wiring CanopyDownrod

PAG E

Maintenance &

Cleaning

Troubleshooting

PAG E

Warranty Statement

PAG E

Switch Housing Light Kit

Blades

PAG E

Congratulations on purchasing your new Hunter®

ceiling fan! It will provide comfort and performance

in your home or ofce for many years. This installation

and operation manual contains complete instructions

for installing and operating your fan.

We are proud of our work and appreciate the

opportunity to supply you with the best ceiling fan

available anywhere in the world.

Wall Control

PAG E

www.hunterfan.com.br

MD518-01 • 10/06/14 • © Hunter Fan Company

What to Expect with Your Installation

w.1 - To reduce the risk of re, electrical shock, or personal injury,

mount fan directly from building structure and/or an outlet

box marked acceptable for fan support of 31.8 kg and use the

mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or

servicing your fan, disconnect the power by turning off the circuit

breakers to the outlet box and associated wall switch location. If

you cannot lock the circuit breakers in the off position, securely

fasten a prominent warning device, such as a tag, to the service

panel.

w.3 - To reduce the risk of re, electrical shock, or motor damage,

use only Hunter Solid State Speed Controls.

w.4 - To reduce the risk of personal injury, do not bend the blade

brackets when installing the blade brackets, balancing the blades, or

cleaning the fan. Do not insert foreign objects in between rotating fan

blades.

w.5 - This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

people with a lack of experience and knowledge, unless they have

received instructions regarding the use of the device or under the

supervision of a person responsible for their safety.

w.6 - It is recommended that children be supervised to ensure that

they are not using the appliance improperly

c.1 - All wiring must be in accordance with national and local

electrical codes. If you are unfamiliar with wiring, use a qualied

electrician.

c.2 - Use only Hunter replacement parts.

You may need a

friend to help you.

Check box to see

fan weight

Assess location

0,50 meters

from blade tip to

nearest wall or

obstruction

2,3 meters

from bottom

edge of blade to

the oor

Know your wiring

If you are unfamiliar

with wiring, use a

qualied electrician.

WARNINGS

CAUTIONS

Must be able to

secure the fan to

building structure or

fan-rated outlet box.

Do not use a plastic

outlet box.

Select a downrod length

Standard Downrod

for ceilings 2,4 -3 meters high

Shorter Downrod

for fans installed close to ceiling

Longer Downrod

for ceilings 3 meters or higher

Use ONLY Hunter

Ceiling Fan branded

accessory light kits.

www.hunterfan.com.br

Tools Needed

Ladder

Pliers Wire Strippers

Screwdrivers

Power Drill

(optional)

3.5 mm Drill

Bit (optional)

8 mm Drill Bit

(optional)

If mounting to a support structure, you

will also need these tools.

Hammer

(optional)

MD518-01 • 10/06/14 • © Hunter Fan Company

www.hunterfan.com.br

Hang your fan by a standard downrod

(included) or use a shorter downrod (sold

separately) for Low-Prole Mounting.

Mounting Options Ceiling Bracket

Note: Do not hang the fan from a

ceiling that is angled greater than 34°.

Support

Structure

Ceiling

Outlet Box

(required)

Angled

Mounting

Style

Standard

Mounting

Style

Support

Structure

Ceiling

Outlet Box

(required)

Carefully choose the installation location

that allows for optimal air ow.

The support structure must be able to support 5

times the weight of the fan. The weight of the fan is

located on the product packaging.

You will need a longer downrod (sold

separately) to hang the fan from a

vaulted or angled ceiling.

If you have a at ceiling: If you have an angled ceiling:

Make sure all four (4) bumpers

are still attached.

For angled ceilings, point

opening toward peak.

OFF

Turn Power

MD518-01 • 10/06/14 • © Hunter Fan Company

www.hunterfan.com.br

MD518-01 • 10/06/14 • © Hunter Fan Compan

Ceiling Bracket (continued)

Refer to warning w.1 on pg. 2

To avoid possible electrical shock, before

installing your fan, disconnect the power by

turning off the circuit breakers to the outlet

box associated with the wall switch location.

Use wood screws

(included) when securing

to support structure with

approved electrical outlet

box. Drill 3.5 mm pilot

holes in support structure

to aid in securing ceiling

bracket with hardware

found in the hardware

bag.

Use machine screws

(provided with outlet

box) when securing to

existing ceiling fan-rated

outlet box. Make sure

it is securely installed

and is acceptable for fan

support of 31.8 kg or less.

Note: Do not mount ceiling fan

to a plastic outlet box.

Use concrete anchors (included)

when securing to support structure

with approved outlet box in a concrete

ceiling. Drill 8 mm pilot holes in

support structure. Hammer the M6

expansion anchors into the holes until

the ends are ush with the ceiling.

Install the washer, isolator, and nut

found in the hardware bag to

the expansion anchors.

www.hunterfan.com.br

MD518-01 • 10/06/14 • © Hunter Fan Compan

Downrod

Slide

1 2 3 4 5

678910

Sold Separately

Longer

Downrod

for angled

ceilings or

ceilings 3 m or

higher

Shorter

Downrod

for fans installed

close to ceiling

Standard

Downrod

for ceilings 2,4-3 m

high

Option 1Option 2

Option 3

skip to next page

If you need a different downrod length follow these steps:

Steps 1-5 to remove standard downrod pipe

Steps 6-10 to reassemble with new pipe

Included

(pre-assembled)

Sold Separately

www.hunterfan.com.br

MD518-01 • 10/06/14 • © Hunter Fan Compan

20 cm

1 cm

(not to scale)

Remove the pre-installed

setscrew so that the downrod

can be inserted.

Hand tighten the downrod (at

least 4-5 full turns) until it stops.

The wires can be cut,

but leave at least 20 cm

extending from the top of

the downrod.

Downrod (continued)

Tighten the setscrew

with pliers. DO NOT

HAND TIGHTEN.

If the setscrew is not tightened

securely, the fan may fall.

20 cm 1 cm

www.hunterfan.com.br

MD518-01 • 10/06/14 • © Hunter Fan Compan

Downrod (continued)

DO NOT PICK THE FAN UP BY THE CANOPY

OR WIRES. Place the downrod ball into the

slot in the ceiling bracket.

Put the wires and downrod through the canopy.

Let the canopy sit loosely on top of the fan.

www.hunterfan.com.br

MD518-01 • 10/06/14 • © Hunter Fan Compan

Wiring

Note: To connect the wires,

hold the bare metal leads

together and place a wire

connector over them, then twist

clockwise until tight.

Turn the splices upward and push them carefully back through the hanger bracket

into the outlet box. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the outlet box.

Refer to CAUTION c.1 on pg. 2

Blue

Brown

(Grounded)

Note: To connect the wires,

hold the bare metal leads

together and place a wire

connector over them, then twist

clockwise until tight.

Using the orange wire

connectors from the

hardware bag, connect the

brown wire (ungrounded)

from the ceiling to the

brown and the black with

white stripe wires from the

fan. Connect the blue wire

(grounded) from the ceiling to

the blue wire from the fan.

Using the orange wire

connectors from the

hardware bag, connect the

blue wire (grounded) from

the ceiling to the blue wire

from the fan. Connect the

brown wire (ungrounded)

from the ceiling to the

brown wire from the

fan. Connect the second

(ungrounded) wire from

the ceiling to the black

with white stripe wire from

the fan.

Blue

(Ungrounded)

Brown

Black with white stripe

(Grounded)

(Ungrounded)

For Dual Switches

For a Single Switch

White Stripe

(Ungrounded)

Using an orange wire

connector from the

hardware bag, connect

the 4 grounding wires

(green, green/yellow

stripe, or bare copper)

coming from the ceiling,

downrod, fan, and

hanging bracket.

(Grounding)

Green/Yellow

Stripe

Green/Yellow

Stripe

www.hunterfan.com.br

MD518-01 • 10/06/14 • © Hunter Fan Compan

Canopy

Lift the canopy into place so that

the screw holes are aligned.

Position the canopy so that, when

lifted into place, the canopy ts into

the hanging bracket as shown.

Insert the two canopy screws

found in the hardware bag.

Note: Fan style may vary.

Screw

Holes

www.hunterfan.com.br

MD518-01 • 10/06/14 • © Hunter Fan Compan

Blades

Your blades are shielded with Dust Armor® which

is a nanotechnology coating that repels dust. For

cleaning the fan, use soft brushes or cloths to prevent

scratching. Cleaning agents may damage the nishes.

Lightly attach the blade irons to the motor

with the blade iron armature screws, found

in the hardware bag. Then, securely

tighten after both screws are attached.

Attach each blade to a blade iron using three

blade washers and three blade assembly

screws, found in the hardware bag.

www.hunterfan.com.br

MD518-01 • 10/06/14 • © Hunter Fan Compan

Feed the wire plug through the center

hole of the upper switch housing, then

wrap keyhole slots around the screws and

twist clockwise.

Screw two housing assembly screws from

the hardware bag halfway into the

motor housing. It does not matter which

two screw holes you choose.

Insert the third screw, found in the

hardware bag, into place and then tighten

all three screws.

Make sure the upper switch housing is securely attached

to the mounting plate. Failure to properly secure all 3 assembly

screws could result in the switch housing xture falling.

Switch Housing

www.hunterfan.com.br

MD518-01 • 10/06/14 • © Hunter Fan Compan

Light Kit

Make sure the lower switch housing is securely attached

to the upper switch housing. Failure to properly secure all

three assembly screws could result in the light xture falling.

Connect the plugs from the upper and lower

switch housings. Make sure to line up the

colored markings on the connectors.

Install the three switch housing screws

found in the bag.

Install a 20W CFL bulb (sold separately) into

each of the E27 sockets. When necessary,

replace with bulbs of same wattage.

Bulb

www.hunterfan.com.br

Light Kit (continued)

CONGRATULATIONS!

YOU’RE DONE!

Note: Glass shade style and number of lights may vary.

To install the outer glass, raise the outer

glass to the light xture. Align the holes

in the outer glass with the holes in the

upper switch housing brackets. Securely

tighten the included thumbscrews, found

in the hardware bag.

Shade

Thumbscrew

Carefully lift the glass so the threaded rod

on the light xture goes through the hole

in the globe. With the other hand, install

the nial cap onto the threaded rod and

tighten securely.

Glass

Finial Cap

Metal

Plate

www.hunterfan.com.br

Press the rotary switch terminal

into the hole in the faceplate as

shown with screw terminals facing

away from the light switch. Install

the knob onto the switch after it is

pressed into the faceplate.

Attach a jumper wire (not included)

from terminal 2 of the rotary switch

to the center terminal of the rocker

switch. Tighten the set screws.

Connect the wires from the capacitor

to the rotary switch terminal as

follows:

• Grey from the capacitor to

terminal 3. Tighten the set

screw.

• Brown from the capacitor to

terminal 1. Tighten the set

screw.

• Green from the capacitor to

terminal 4. Tighten the set

screw.

To install the wall control, you must

first remove the faceplate and switch

assembly from the existing wall

control, if you have one.

Save the screws you removed from

the faceplate to use with the new

included faceplate.

Wall Control

Rotary Switch

Terminal

Rotary Switch

Terminal

Capacitor

Knob

Rotary Switch

Terminal

Rocker

Switch

Note: A power disconnect

switch should be installed in

conjunction with the wall control.

www.hunterfan.com.br

Wall Control (continued)

The light switch turns the light on and off.

The fan control controls the speed of the fan

as follows:

High Speed

Medium Speed

Low Speed

Fan Off

Be sure no bare wire is exposed at the

connection points. Attach the faceplate

assembly to the wall box using the two screws

you saved from the original faceplate intalled

with your wall switch. Press the faceplate onto

the faceplate assembly.

Faceplate

Assembly

• Connect the wire for the fan to the rotary

switch terminal 3. Tighten the set screw.

• Connect the wire to the light to the

rocker switch top terminal. Tighten the

set screw.

• Connect the wire from the supply main to

the rocker switch center terminal. Tighten

the set screw.

Fan Wire

Supply Main

Light Wire

Note: The rocker switch terminal may

have an additional bottom terminal

that will not be used.

Turn Power

Rocker Switch

Terminal

www.hunterfan.com.br

Maintenance & Cleaning

To switch the direction of air ow,

move the reverse switch to the

opposite position. You will need to

remove the glass to do so.

For cleaning the fan, use soft brushes or

cloths to prevent scratching. Cleaning

products may damage the nishes.

To avoid accident or injury, avoid touching the

ceiling fan blades with your hands.

Reverse

Switch

www.hunterfan.com.br

Troubleshooting

Excessive wobbling

• Tighten all of the blade and

blade iron screws until they

are snug.

• Turn the power off, support

the fan carefully, and check

that the hanger ball is

properly seated.

Noisy Operation

• Tighten the blade and blade

iron screws until they are snug.

• Check to see if any of the

blades are cracked. If so, replace

all of the blades.

Fan doesn’t work

• Make sure power switch is on.

• Push the motor reversing switch

rmly left or right to ensure that

it is engaged.

• Check the circuit breaker to

ensure the power is turned on.

• Make sure the blades spin freely.

• Turn off power from the circuit

breaker, then loosen the canopy

and check all the connections

according to the wiring diagram

on page 9.

• Check the plug connection in

the switch housing.

Lights dim when turned on or

do not turn on at all.

• Make sure the wattage of the

light bulbs installed matches

the specications on the light

sockets.

Page is loading ...

Hunter Fan 50081 Owner's manual

Brand: Hunter Fan

Model: 50081

Type: Owner's manual

This manual is also suitable for

50080
50880

Download PDF

report

Hunter Fan 50081 Owner's manual

This manual is also suitable for

Hunter Fan 50081 Owner's manual

Related papers

Other documents