2. American Standard
  3. 270FA001.222
270FA001.222

American Standard 270FA001.222 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the American Standard 270FA001.222 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
K206
© 2013 AS America Inc.
CADET
®
3 COMPACT RIGHT HEIGHT
®
ELONGATED TOILET
VITREOUS CHINA
7/13
CADET
®
3 COMPACT RIGHT HEIGHT
®
ELONGATED TOILET
❑ 270FA.001
•FeaturestheCadet
®
Flushing System
•Vitreouschina
•Spacesavingelongatedbowltsinspaceof
aroundfront
•Lowconsumption(6.0Lpf/1.6gpf)
•PowerWash
®
rimscrubsbowlwitheachush
•Includescolormatchbowlcaps
•EverClean
®
surfaceincluded
•3"ushvalve
•2-1/8"trapway
•16-1/2"rimheightforaccessibleapplications
•12"(305mm)rough-in
•Generous9"x8"watersurfacearea
•Chromenishtripleverissupplied
•1,000gMaPScore**at1.6gpf
•5yearwarranty
❑ 3717F.0 01
CompactRightHeight
®
ElongatedBowl
❑ 4019.001NTank
Nominal Dimensions:
719x439x722mm(28-5/16"x17-1/4"x30-3/8")
Fixtureonly,seatandsupplysoldseparately
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2-2008/CSAB45.1-08forVitreous
ChinaFixtures
BARRIER FREE
To Be Specied:
❏Color:❏White❏Bone❏Linen
❏Seat:#5321.110EverClean
®
ElongatedSeatwith
SlowCloseSnap-OffHinges
❏Supplywithstop:
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
NOTES:
THISTOILETISDESIGNEDTOROUGH-INATAMINIMUMDIMENSIONOF
305MM(12")FROMFINISHEDWALLTOC/LOFOUTLET.
SUPPLYNOTINCLUDEDWITHFIXTUREANDMUSTBEORDEREDSEPARATELY.
*
DIMENSIONSHOWNFORLOCATIONOFSUPPLYISSUGGESTED.
IMPORTANT: Dimensionsofxturesarenominalandmayvarywithintherangeof
tolerancesestablishedbyANSIStandardA112.19.2.
Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibilityis
assumedforuseofsupersededorvoidedpages.
FINISHED WALL
FINISHED
FLOOR
C/L OF OUTLET
191mm
(7-1/2")
719mm
(28-5/16")
19mm
(3/4")
58mm
(2-1/4")
31mm
(1-1/4")
470mm
(18-1/2")
419mm
(16-1/2")
305mm
(12")
300mm
(11-13/16")
235mm
(9-1/4")
C/L OF SEAT POST
HOLES 140mm
(5-1/2" CENTERS)
SUPPLY
AS
REQ'D.
439mm
(17-1/4")
722mm
(30-3/8")
*203mm
(8")
356mm
(14")
*152mm
(6")
244mm
(9-5/8")
** Maximum Performance (MaP) testing performed by
IAPMO R&T Lab. MaP Report conducted by Veritec
Consulting, Inc. and Koeller and Company.
/