Belkin F5U230 Owner's manual

Belkin
Brand
Belkin
Model
F5U230
Type
Owner's manual

This manual is also suitable for

Belkin F5U230 is a USB-IrDA adapter that connects to a PC or server via the Universal Serial Bus (USB) port. It is compatible with Windows 98, Windows Me, Windows 2000, and Windows XP operating systems. The adapter allows for data transfer between devices using infrared technology. Some possible use cases include:

  • File sharing: The adapter can be used to transfer files between two devices that are within close proximity to each other.
  • Printing: The adapter can be used to connect a printer to a computer, allowing for wireless printing.
  • Networking: The adapter can be used to create a wireless network between two or more devices.

Belkin F5U230 is a USB-IrDA adapter that connects to a PC or server via the Universal Serial Bus (USB) port. It is compatible with Windows 98, Windows Me, Windows 2000, and Windows XP operating systems. The adapter allows for data transfer between devices using infrared technology. Some possible use cases include:

  • File sharing: The adapter can be used to transfer files between two devices that are within close proximity to each other.
  • Printing: The adapter can be used to connect a printer to a computer, allowing for wireless printing.
  • Networking: The adapter can be used to create a wireless network between two or more devices.
Page is loading ...
Page is loading ...
3
English . . . . . . . . . . . . . . . . . . . . .1
Français (Europe) . . . . . . . . . . . .25
Deutsch . . . . . . . . . . . . . . . . . . .49
En
Fr
De
P73959ec_F5U230ec 16-08-2002 15:12 Page 3
Page is loading ...
1
En
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation of USB-IrDA under Win98/ME . . . . . . . . . . . . . . . . . . 4
USB devices listing following installation . . . . . . . . . . . . . . . . . . . 7
Uninstallation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
USB-IrDA installeren under Win2000 . . . . . . . . . . . . . . . . . . . . . 11
USB devices listing following installation . . . . . . . . . . . . . . . . . . 13
Uninstallation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
USB-IrDA installeren under WinXP . . . . . . . . . . . . . . . . . . . . . . . 16
USB devices listing following installation . . . . . . . . . . . . . . . . . . 18
Uninstallation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Contents
P73959ec_F5U230ec 16-08-2002 15:12 Page 1
Page is loading ...
Introduction
3
Thank you for choosing the USB-IrDA adapter. The USB-IrDA is an
Infrared adapter that connects to a PC or server via the Universal
Serial Bus (USB) port.
System Requirements
• Pentium-class PC with USB port.
• 1 available USB type A (downstream) port.
• Windows 98, Windows Me, Windows 2000 or Windows XP
operating system.
En
P73959ec_F5U230ec 16-08-2002 15:12 Page 3
A3.
A4.
A5.
Installation of USB-IrDA under Win98/ME
4
Note: Please install USB-IrDA according to the procedure below. Do
not connect the USB-IrDA to your computer if the installation has not
yet been completed.
To install the USB-IrDA drivers
A1. Please insert the driver disk into
the Computer’s disk drive then
execute “IRXpress.exe”.
Click “Next” to continue.
(Figure A-1)
A2. Click “Next” to continue.
(Figure A-2)
P73959ec_F5U230ec 16-08-2002 15:12 Page 4
5
A3. Click “Next” to continue.
(Figure A-3)
A4. Click “Next” to continue.
(Figure A-4)
A5. For Win98, please select
“KC Technology, Inc.”,
and select “IRXpress USB IrDA
Adapter – Windows 98”.
Click “OK” to continue.
(Figure A-5)
Installation of USB-IrDA under Win98/ME
E
D
o
n
ot
En
P73959ec_F5U230ec 16-08-2002 15:12 Page 5
6
A6. For WinMe, please select
“KC Technology, Inc.”,
and select “IRXpress USB IrDA
Adapter - Windows Me”.
Click “OK” to continue.
(Figure A-6)
A7. Click “Finish”, Windows has
finished installing the device.
(Figure A-7)
A8. Select “Yes, I want to restart
my computer now”. Then click
“Finish” to restart the system
and complete the driver
installation.
(Figure A-8)
After restarting the computer, please
plug the flat end of the USB cable into
the downstream A connector located
at the back of your computer or USB
HUB port, and plug the upstream,
square, B connector into the USB-IrDA adapter.
I
Installation of USB-IrDA under Win98/ME
US
P73959ec_F5U230ec 16-08-2002 15:12 Page 6
Installation of USB-IrDA under Win98/ME
7
E
B1. To make sure you have installed
the device successfully, please
move the cursor to “My
computer” -> “Control Panel” ->
“System Properties” -> “Device
Manager” -> ”Infrared devices”.
It will show a new directory
“IRXpress USB IrDA Adapter“.
IRXpress USB IrDA Adapter
B2. And in the same window, you can
select ”Network adapters”. This
will show “IRXpress USB IrDA
Adapter – Windows 98”.
IRXpress USB IrDA
Adapter –Windows 98
USB devices listing following installation
En
P73959ec_F5U230ec 16-08-2002 15:12 Page 7
8
B3. It will show “IRXpress USB IrDA
Adapter – Windows Me” under
Win ME.
IRXpress USB IrDA Adapter –
Windows Me
B4. And in the same window, you can
select ”Ports [COM & LPT]”. It
will show “Virtual Infrared COM
Port”.
Virtual Infrared COM Port
I
Installation of USB-IrDA under Win98/ME
P73959ec_F5U230ec 16-08-2002 15:12 Page 8
9
B5. And in the same window, you can
select ”Ports [COM & LPT]”. It
will show “Virtual Infrared LPT
Port”.
Virtual Infrared LPT Port
D
A
er
c
an
It
O
M
Installation of USB-IrDA under Win98/ME
E
En
P73959ec_F5U230ec 16-08-2002 15:12 Page 9
C1. Select “IRXpress USB-IrDA” from
the list.
Click “Add/Remove” to uninstall
the driver of the USB-IrDA.
10
Uninstallation
If you want to remove the driver for the USB-IrDA, you can move
the cursor to “My computer” -> “Control Panel” -> “Add/Remove
Programs”. It will show a dialog box then select “Install/Uninstall”
C2. Click “Yes” to continue.
C3. Click “OK” to complete the
driver’s removal.
Installation of USB-IrDA under Win98/ME
No
t
not
yet
To
D1.
D2.
P73959ec_F5U230ec 16-08-2002 15:12 Page 10
r
om
t
all
v
e
v
e
a
ll”
Installation of USB-IrDA under Win2000
11
E
Note: Please install USB-IrDA according to the procedure below. Do
not connect the USB-IrDA to your computer if the installation has not
yet been completed.
To install the USB-IrDA drivers
D1. Please insert the driver disk into
the Computer’s disk drive then
execute “IRXpress.exe”.
Click “Next” to continue.
(Figure D-1)
D2. Click “Next” to continue.
(Figure D-2)
En
P73959ec_F5U230ec 16-08-2002 15:12 Page 11
Installation of USB-IrDA under Win2000
12
D3. Click “Next” to continue.
(Figure D-3)
D4. Select “Yes, I want to restart my
computer now”, then click
“Finish” to restart the system and
complete the driver installation.
(Figure D-4)
After restarting the computer, please
plug the flat end of the USB cable into
the downstream A connector located
at the back of your computer or USB
HUB port and plug the upstream,
square B connector into the USB-IrDA
adapter.
US
P73959ec_F5U230ec 16-08-2002 15:12 Page 12
13
E2. And in the same window, you can
select ”Universal Serial Bus
controllers”. This will show
“IRXpress USB IrDA Adapter”.
IRXpress USB IrDA Adapter
E1. To make sure you have installed
the devicesuccessfully, please
move the cursor to “My
computer” -> “Control Panel” ->
“System Properties” ->
“Hardware” -> “Device
Manager” -> ”Infrared devices”.
It will show a new directory
“IRXpress USB Infrared
Adapter“.
IRXpress USB Infrared Adapter
USB devices listing following installation
Installation of USB-IrDA under Win2000
En
P73959ec_F5U230ec 16-08-2002 15:12 Page 13
Installation of USB-IrDA under Win2000
14
Uninstallation
If you want to remove the driver for the USB-IrDA, you can move
the cursor to “My computer” -> “Control Panel” -> “Add/Remove
Programs”.
It will show a dialog box then select “Install/Uninstall”.
F1. Select “IRXpress USB-IrDA”
from the list.
Click “Change/Remove” to
uninstall the driver of the USB-
IrDA.
F2. Click “Yes” to continue.
F3. Click “Yes To All” to continue.
P73959ec_F5U230ec 16-08-2002 15:12 Page 14
Installation of USB-IrDA under Win2000
15
F4. Click “Yes” to continue.
F5. Click “OK” to complete the
device driver’s removal.
v
e
v
e
En
P73959ec_F5U230ec 16-08-2002 15:12 Page 15
Installation of USB-IrDA under WinXP
16
G3.
G4.
Aft
e
plu
g
the
at t
h
HU
B
squ
a
ada
Note: Please install the USB-IrDA driver according to the procedure below.
Do not connect the USB-IrDA to your computer if the installation has
not yet been completed.
To install the USB-IrDA drivers
G1. Please insert the driver disk into
the Computer’s disk drive then
execute “IRXpress.exe”.
Click “Next” to continue.
(Figure G-1)
G2. Click “Next” to continue.
(Figure G-2)
P73959ec_F5U230ec 16-08-2002 15:12 Page 16
Installation of USB-IrDA under WinXP
17
G3. Click “Next” to continue.
(Figure G-3)
G4. Select “Yes, I want to restart
my Computer now”, then click
“Finish” to restart the system and
complete the driver installation.
(Figure G-4)
After restarting the computer, please
plug the flat end of the USB cable into
the downstream A connector located
at the back of your computer or USB
HUB port and plug the upstream,
square, B connector into the USB-IrDA
adapter.
l
ow.
a
s
En
P73959ec_F5U230ec 16-08-2002 15:12 Page 17
Installation of USB-IrDA under WinXP
18
Un
If y
o
the
Pro
g
It
w
I1.
I2.
I3.
USB devices listing following installation
H1. To make sure you have installed
the device successfully, please
move the cursor to “My
computer” -> “Control Panel” ->
“Performance and maintenance”
-> “System” -> “System
Properties” -> “ Hardware” ->
“Device Manager” ->”Infrared
devices”. It will show a new
directory “IRXpress USB IrDA
Adapter“.
IRXpress USB Infrared Adapter
H2. And in the same window, you can
select ”Universal Serial Bus
controllers”.
This will show “IRXpress USB
IrDA Adapter”.
IRXpress USB Infrared Adapter
P73959ec_F5U230ec 16-08-2002 15:12 Page 18
Installation of USB-IrDA under WinXP
19
Uninstallation
If you want to remove the driver for the USB-IrDA, you can move
the cursor to “My computer” -> “Control Panel” -> “Add/Remove
Programs”.
It will show a dialog box then select “Install/Uninstall”.
I1. Select “IRXpress USB-IrDA” from
the list.
Click “Change/Remove” to
uninstall the driver of the USB-IrDA.
I2. Click “Yes” to continue.
I3. Click “Yes to All” to continue.
d
”
->
ce”
>
d
c
an
En
P73959ec_F5U230ec 16-08-2002 15:12 Page 19
1.
Installation of USB-IrDA under WinXP
20
I4. Click “Yes” to continue.
I5. Click “OK” to complete the
device driver’s removal.
2.
P73959ec_F5U230ec 16-08-2002 15:12 Page 20
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76

Belkin F5U230 Owner's manual

Belkin
Brand
Belkin
Model
F5U230
Type
Owner's manual
This manual is also suitable for

Belkin F5U230 is a USB-IrDA adapter that connects to a PC or server via the Universal Serial Bus (USB) port. It is compatible with Windows 98, Windows Me, Windows 2000, and Windows XP operating systems. The adapter allows for data transfer between devices using infrared technology. Some possible use cases include:

  • File sharing: The adapter can be used to transfer files between two devices that are within close proximity to each other.
  • Printing: The adapter can be used to connect a printer to a computer, allowing for wireless printing.
  • Networking: The adapter can be used to create a wireless network between two or more devices.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents