Rust-Oleum Industrial Choice 1601838 User manual

Brand: Rust-Oleum Industrial Choice

Model: 1601838

Type: User manual

AEROSOLS TECHNICAL DATA IC-06

M1600/M1800 SYSTEM

PRECISION LINE

INVERTED MARKING PAINT

AEROSOL

Form: 210514

Rev.: 041414

.DESCRIPTION AND USES .

A general purpose inverted marking paint. Use for marking

concrete, pavement, gravel, grass, and more. Ideal for marking

the location of underground utilities at construction and

excavation sites where identification is desired.

.PRODUCTS .

SKU Description

WATER- BASED

203031 Caution Blue

203033 Caution Yellow

203034 High Visibility Yellow

203035 Alert Orange

203038 Safety Red

203039 White

1801838 Clear

1834838 Safety Green

1868838 Safety Purple

1875838 Black

203032 Fluorescent Green

203036 Fluorescent Orange

203037 Fluorescent Red-Orange

1861838 Fluorescent Pink

1862838 Fluorescent Red

1869838 Fluorescent Purple

205176 Fluorescent Blue

SOLVENT BASED

201516 APWA Orange

203022 Caution Blue

203024 Caution Yellow

203025 High Visibility Yellow

203026 Alert Orange

203029 Safety Red

203030 White

1601838 Clear

1634838 Safety Green

1668838 Safety Purple

1675838 Black

203023 Fluorescent Green

203027 Fluorescent Orange

203028 Fluorescent Red-Orange

1661838 Fluorescent Pink

1662838 Fluorescent Red

1669838 Fluorescent Purple

239007 Silver

PACKAGING .

Inverted 20 fl. oz. aerosol container, (17 oz. weight fill;

except 1801838 Clear and 239007 Silver: 16 oz. fill

weight), 12 aerosols/carton.

.PRODUCT APPLICATION .

SURFACE PREPARATION

ALL SURFACES: Remove loose contaminants by

sweeping the surface before application of the coating.

APPLICATION

Use when temperature is 40-90°F (10-32°C) and humidity

is below 85% to ensure proper drying. This product can be

used down to 25°F (-4°C) which may result in a slight

reduction of delivery rate. Protect surrounding surfaces

from overspray. Overspray can carry a significant distance.

Shake can vigorously for one minute after mixing ball is

heard. Invert can and point at ground or floor. Hold can 4

to 10 inches above surface to be marked. Press in

sideways to spray or use Rust-Oleum Marking Wand

(#2393000) or Rust-Oleum Marking Pistol (#210188).

Follow directions for proper use of this equipment. Keep

can moving to prevent build-up. Clean valve by spraying

upright for 2-3 seconds after each use.

CLOGGING

If valve clogs, carefully remove spray tip and clean in

thinner. DO NOT insert any object into can valve opening.

TECHNICAL DATA

M1600/M1800 SYSTEM PRECISION LINE

INVERTED MARKING PAINT AEROSOL

Rust-Oleum Corporation Form: 210514

11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 041414

Vernon Hills, Illinois 60061 www.rustoleum.com/industrial

An RPM Company

PHYSICAL PROPERTIES .

PRECISION LINE INVERTED MARKING PAINT

Resin Type

Modified alkyd

Pigment Type

Varies with color

MIR

Maximum value of 1.2

Fill Weight

17 oz.; except 1801838 Clear and 239007 Silver: 16 oz. fill weight

Practical Coverage

Approximately 600-700 linear feet at 1 in. wide

Dry Times at 70-80°F

(21-27°C) and 50%

Relative Humidity

Less than 5 minutes

Shelf Life

5 years

Safety

Information

Contains

Acetone, Xylene, and Toluene

Warning!

THIS PRODUCT CONTAINS A CHEMICAL KNOWN TO THE STATE OF

CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS, OR OTHER

REPRODUCTIVE HARM.

DANGER! EXTREMELY FLAMMABLE. MAY CAUSE FLASH FIRE. CONTENTS

UNDER PRESSURE. VAPOR HARMFUL. FOR INDUSTRIAL OR COMMERCIAL USE

ONLY. REFER TO MATERIAL SAFETY DATA SHEET AND LITHOGRAPHED CANS

FOR MORE COMPLETE SAFETY INFORMATION.

Calculated values are shown and may vary slightly from the actual manufactured material.

The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature

do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we

can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All