ZyXEL FAN500 User manual

ZyXEL
Brand
ZyXEL
Model
FAN500
Type
User manual

ZyXEL Communications FAN500 is a fan module designed for use with compatible ZyXEL switches. It helps maintain optimal operating temperatures within the switch, ensuring reliable performance and preventing overheating. The FAN500 features hot-swappable installation, allowing for quick and easy replacement without interrupting switch operation. Its LED indicator provides visual feedback on the fan's status, simplifying troubleshooting and maintenance.

ZyXEL Communications FAN500 is a fan module designed for use with compatible ZyXEL switches. It helps maintain optimal operating temperatures within the switch, ensuring reliable performance and preventing overheating. The FAN500 features hot-swappable installation, allowing for quick and easy replacement without interrupting switch operation. Its LED indicator provides visual feedback on the fan's status, simplifying troubleshooting and maintenance.

Quick Start Guide
www.zyxel.com
FAN500
Fan Module
Version 1.00
Edition 1, 05/2013
Copyright © 2013 ZyXEL Communications Corporation
Hardware Installation Guide
Fan Module Hardware Installation Guide2
IMPORTANT!
READ CAREFULLY BEFORE USE.
KEEP THIS GUIDE FOR FUTURE REFERENCE.
This guide shows how to install the fan module in the Switch. Graphics in this book may differ
slightly from your product. Every effort has been made to ensure that the information in this
manual is accurate.
Related Documentation
• Rack Mounting Hardware Installation Guide
This guide shows you how to use the rack mounting kit to install the Switch in a rack.
• Power Module Hardware Installation Guide
This guide shows you how to install the power module in the Switch.
•User’s Guide
This guide shows how to use the Web Configurator to configure the Switch.
• CLI Reference Guide
This guide explains how to use the Command-Line Interface (CLI) to configure the Switch.
• Web Configurator Online Help
Click the help icon in any web configurator screen for help in configuring that screen and
supplementary information.
Fan Module Hardware Installation Guide 3
CHAPTER 1
Fan Module Installation
1.1 Overview
The Switch fan module is at the left on the rear panel. Perform the following procedure to remove
the fan module in order to replace the entire fan module. Return any malfunctioning fan modules to
the manufacture.
Although all modules are hot-swappable, it is recommended you disconnect power or make sure
you are safely grounded and dry before installing or removing the fan module.
1.1.1 Removing a Fan Module
1 Loosen the screws on the front of the fan module.
2 Grab the handles and slide the fan module out.
1.1.2 Installing a Fan Module
Perform the following procedure to install a fan module.
Chapter 1 Fan Module Installation
Fan Module Hardware Installation Guide
4
1 Use a screwdriver to loosen the screws on the fan slot cover and remove it if any.
2 Grab the handles of the front panel of a fan module with one hand and place the other hand under
it to support it.
3 Insert the fan module into the fan slot.
4 Slide the fan module into the slot until it makes contact with the backplane and tighten the screws.
Chapter 1 Fan Module Installation
Fan Module Hardware Installation Guide
5
1.1.3 Fan Module LED
The following table describes the fan module LED.
Table 1 Fan Module LED
LED COLOR STATUS DESCRIPTION
FAN OK Green On The fan in the fan module is operating properly
Off The power is off or the module is not ready or malfunctioning.
Chapter 1 Fan Module Installation
Fan Module Hardware Installation Guide
6
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

ZyXEL FAN500 User manual

ZyXEL
Brand
ZyXEL
Model
FAN500
Type
User manual

ZyXEL Communications FAN500 is a fan module designed for use with compatible ZyXEL switches. It helps maintain optimal operating temperatures within the switch, ensuring reliable performance and preventing overheating. The FAN500 features hot-swappable installation, allowing for quick and easy replacement without interrupting switch operation. Its LED indicator provides visual feedback on the fan's status, simplifying troubleshooting and maintenance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents