Graco 312345A Owner's manual

Type
Owner's manual

Graco 312345A is a PC Board Kit for LineLazer IV Auto-Layout System, compatible with 3900/5900/200HS models. It's an essential component for maintaining optimal sprayer performance.

The kit includes a printed circuit board and necessary resistors. By following the instructions provided in the sprayer repair manual, you can easily install the PC board, ensuring proper functioning of your LineLazer IV Auto-Layout System.

This system is designed to enhance your spraying experience, providing accurate and efficient layout capabilities.

Graco 312345A is a PC Board Kit for LineLazer IV Auto-Layout System, compatible with 3900/5900/200HS models. It's an essential component for maintaining optimal sprayer performance.

The kit includes a printed circuit board and necessary resistors. By following the instructions provided in the sprayer repair manual, you can easily install the PC board, ensuring proper functioning of your LineLazer IV Auto-Layout System.

This system is designed to enhance your spraying experience, providing accurate and efficient layout capabilities.

Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441
Copyright 2005, Graco Inc. is registered to I.S. EN ISO 9001
1 Refer to your sprayer repair manual for the
procedures.
2Do Pressure Relief Procedure.
3 Remove pressure control cover.
4 Remove PC board.
5 Cut out and remove the resistor(s) on PC
board according to figure and table.
6 Install PC board.
7 Install pressure control cover.
312345A
Installation
LineLazer IV Auto-Layout System
PC Board Kit 289135
3900/5900/200HS
Important Safety Instructions.
Read all warnings and instructions in this
manual. Save these instructions.
CAUTION
Electrostatic discharges can damage components on PC
board. Use a ground strap when handling or installing PC
board.
Using configurations other than those listed results in poor
sprayer performance.
XX
123
ti10251a
CUT X TO SELECT THE CHOSEN MODEL.
INTL 200 HS EXAMPLE SHOWN
2
3
1
3900
Striper
3900
Striper
Intl
5900
Striper
200 HS
Striper
200 HS
Striper
5900
Intl
Striper
x
x
x
x
x
x
x
x
x
Intl
TRANSDUCER
SOLENOID
LCD DISPLAY
Q13
D36
J13/2
Q16
TP4
D16
U10
Q12
Q11
Q4
Q27
Q25
D32
Q20
D15
Q6
D34
C9
J5
RMT
D22
TP2
D10
TP1
D11
J1J2
D24
D28
J14
Q33
J13/3
U11
Q14
Q10
Q32
D38
U5
C4
U2
D27
J13/1
Q24
D12
D23
U6
Q9
Q5
D5
CLUTCH-
Q7
D7
Q8 D6
J10
Q18
Q26
D33
D17
D14
J11
Q1
TP3
CLUTCH+
Q3
D35
C13
D18
D19
D30
D31
Q29
Q30
C7
J4
J3
X1
D37
Q21
Q19
R43
JLS
GRACO
J9
D29
Q28
U9
D4
D2
D3
D1
Q31
D20
Q22
J16
D26
D25
J15
D9
D13
Q23
U7
D21
C23
Q15
L1
J18
C2
HTSNK1
Q2
U4
C3 U1
Q17
C1
D8
R4
J8
J12
BUZZ1
AUTOLAYOUT
3900
AUTOLAYOUT
5900
AUTOLAYOUT
200 HS
ti10251a
Proven Quality, Leading Technology
2 312345A
Graco Information
TO PLACE AN ORDER, contact your Graco distributor, or call 1-800-690-2894 to identify the nearest distributor.
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
MM 312345
Graco Headquarters: Minneapolis
International Offices: China, Belgium, Japan, Korea
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441
http://www.graco.com
Written in U.S.A. 7/2007
  • Page 1 1
  • Page 2 2

Graco 312345A Owner's manual

Type
Owner's manual

Graco 312345A is a PC Board Kit for LineLazer IV Auto-Layout System, compatible with 3900/5900/200HS models. It's an essential component for maintaining optimal sprayer performance.

The kit includes a printed circuit board and necessary resistors. By following the instructions provided in the sprayer repair manual, you can easily install the PC board, ensuring proper functioning of your LineLazer IV Auto-Layout System.

This system is designed to enhance your spraying experience, providing accurate and efficient layout capabilities.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI