2. Phanteks
  3. Glacier C360i

Phanteks Glacier C360i Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Phanteks Glacier C360i Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTALLATION GUIDE V1.0
intel cpu block
GLAC IER C360i
PH-C360i_01
PACKAGE CONTENTS
WARNING - This product is intended for advanced users. Improper installation may result in damage to your equipment. While all eorts have
been made to provide the most comprehensive information possible, Phanteks assumes no liability expressed or implied for any damage(s) occurring to your
components as a result of using Phanteks cooling products, either due to mistake or omission on our part in the below instructions, or due to failure or defect in
the Phanteks cooling products. Do not disassemble the water block. Warranty will be voided.
Turn o the power to your system and discharge your body’s static electric charge before proceeding with the installation procedure. If you do not feel comfortable
with performing the installation procedure, consult a qualied computer technician.
For latest version check www.Phanteks.com
STEP 1. BACKPLATE INSTALLATION
SOCKET 115x INSTALLATION (for socket 2011-3, go to step 2)
STEP 2. THERMAL PASTE APPLICATION
GLACIER C360i
QTY: 1
CPU Backplate
QTY: 1
115x Mounting Screw
QTY: 4
Cover Plates BK/CR
QTY: 2
2011-3 Mounting Screw
QTY: 4
115x Stando
QTY: 4
Spring & Washer
QTY: 4
Phanteks D-RGB Cable
QTY: 1
Phanteks Thermal Paste
QTY: 1
D-RGB MB Adapter
QTY: 1
2.5mm Allen Key
QTY: 1
The CPU Backplate is secured with the 4x
115x Standos to the motherboard.
Make sure the backplate orientation
matches the CPU socket:
Apply a pea-size drop of thermal paste to
the center of the CPU.
4x
SOCKET 115x INSTALLATION (for socket 2011-3, go to step 3b)
DIGITAL-RGB INSTALLATION
STEP 3a. C360i INSTALLATION
STEP 3b. C360i INSTALLATION
First assemble the 2011-3 Screw, Spring and
Washer. Then mount the C360i Block on the
CPU Socket.
STEP 4. CONNECT D-RGB STRIP
Connect the D-RGB cable to the LED strip
in the block. You can lift o the magnetic
cover for easy access.
4x
4x
First assemble the 115x Screw, Spring and
Washer. Then mount the C360i Block on the
CPU Socket.
Do not overtighten the 115x Screws.
(Max 1.5N/m)
Do not overtighten the 2011-3 Screws.
(Max 1.5N/m)
Connect to
Phanteks Case / Motherboard Cable
You can connect the D-RGB cable to a
compatible motherboard with the
included D-RGB MB adapter.
All Phanteks D-RGB products can be
daisy-chained together.
1
2
4x
1
2
4x
ADDRESSABLE ADDRESSABLERAINBOW
Compatible with:
Socket 115x
Socket 2011-3
Socket 115x
Socket 2011-3
/