Broan Through-the-Wall Vent Kit Installation guide

7083960 (NEW)

Speciﬁcations & illustrations subject to change without notice or incurring obligations (06/15).

Kit #903196 contains the dilution cover plates and bleed tubes required for converting your furnace from vertical to

through-the-wall vent.

Each bleed tube in the kit is marked by a color. The following chart depicts the proper bleed tube for use with each

furnace. NOTE: No bleed tube is required for the *RA 045C-08 Model only cover plate #150480. The dilution cover

plate necessary for each furnace is also contained in the kit. Cover plate #152530 is for use in conjunction with the

red and white bleed tubes. Cover plate #152540 is for use with the clear bleed tube.

SELECT INSTRUCTIONS

Through-the-Wall Vent Kit

For Use on G6RA/RK and PGF1RA/RK Series Furnaces

VENT KIT PARTS LIST #903196

DESCRIPTION PART # QUANTITY

Selection Instructions 707726 1

Label 703458 1

Bleed Tube - Red 663468 1

Bleed Tube - White 663469 1

Bleed Tube - Clear 663573 1

Dilution Cover Plate 152530 1

Dilution Cover Plate 152540 1

Dilution Cover Plate 150480 1

WHITE CLEAR RED

*RA 072C-16 *RA 144C-20 *RK 072C-VB *RA 060C-12 *RA 060N-12 *RK 060C-12 *RA 096C-VB

*RA 096C-20 *RA 144N-20 *RK 072N-VB *RA 072C-12 *RA 072N-12 *RK 072C-12 *RA 096N-VB

*RA 072N-16 *RK 096C-VB *RA 096C-12 *RA 096N-16 *RK 072C-16 *RA120C-VC

*RA 096N-20 *RK 096N-VB *RA 096C-16 *RA 120N-16 *RK 096C-12 *RA 120N-VC

*RA 072C-VB *RK 120C-VB *RA 120C-16 *RA 120N-20 *RK 096C-16 *RA 144C-VC

*RA 072N-VB *RK120N-VB *RA 120C-20 *RK 135N-20 *RK 120C-20 *RA 144N-VC

*RK 135C-20

VENT KIT

BLEED TUBE CHART