IBBZ-33768 | TabDock 360
Safety Precautions
iBolt is not responsible for any damages caused to your device or
yourself due to the installation or use of this mount.
!
www.ibolt.co
11 Flowet St. Arcadia Ca 91006
Questions? info@ibolt.co
1. Secure the mount on a flat surface
2. Loosen the knobs on each of the arms to adjust the TabDock’s body into any 360
degree angle.
3. Tighten the knob to lock the TabDock in place.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI