Sea Eagle Rescue Board Operating instructions

Close for Inﬂ ation

To inflate:

1 Press & turn valve stem to the left until it pops up.

2 Attach pressure gauge and hose to pump.

3 Inﬂ ate until rigid (up to 10 psi max) & insert cap.

4 Slide skegs into bases & secure with clip.

To deﬂ ate:

Press valve stem and turn the right to release. Stem will stay

down & open.

Caution: WS4 Wave Slider is not a towable. Use of leash is

recommended.

3-Year warranty against manufacturer defects.

Visit www.SeaEagle.com/Warranty

Staﬀ @SeaEagle.com or call us at 1-800-748-8066

WS4 WAVE SLIDER™

This manual is also suitable for

Download PDF