Upgrading map
N81PED0960
Please read this instruction
booklet carefully and completely
before connecting, operating or
adjusting this product.
N81PED0960 (LAN-9600R Upgrade map)_ENG_MFL41647947
2
Supplied discs
Upgrade DVD disc
Map disc
3
1. Press any other buttons
except the DISP or EJECT
button on the front panel to
turn the unit on. Or press
the POWER button on the
remote control.
2. Press the OPEN button
on the front panel to open
the LCD.
3. Touch the “Agree” button
on the screen.
It is different according to
language.
4. Touch the “SETUP” but-
ton on the screen.
5. Touch the “ENTER” button
for more than 4 seconds on
the remote control.
To upgrade the new map data
4
6. Insert the upgrade DVD
disc after checking LCD,
“Check drive...” & “Insert
disc and Wait ...”.
7. After checking the “Mount
Disc. OK . . .” message,
touch “MP Upgrade” on the
center of screen. Then “MP
upgrade” under-bar mes-
sage is displayed on the
LCD.
The upgrade will be start-
ed. It will take about 30
minutes, to continue the
process.
Check drive . . .
Insert Disc and Wait . . .
Write CFC Image (all)
k070126_1530 / a070504_1200_E / 826a
MP Upgrade
Select Function
Mount Disc OK . . .
k070126_1530 / a070504_1200_E / 826a
MP Upgrade
Select Function
5
8. Automatically, the upgrade
disc is rejected. Pull out the
upgrade disc.
9. The “MP Upgrade OK ...”
message is displayed on
the LCD.
10. Turn the unit off. And
then turn the unit on.
11. Touch the “Agree” button
on the screen.
It is different according
to language.
12. Press the “8998” on the
remote control at below
screen (tuner mode).
Please remove the CD the Loader ...
k070126_1530 / a070504_1200_E / 826a
MP Upgrade
Select Function
MP Upgrade OK . . .
k070126_1530 / a070504_1200_E / 826a
MP Upgrade
Select Function
6
13. After checking SW ver,
press the “Exit” button.
- Main application:
a070504_1200_E
- Navigation application:
08.09.10_V1.6
- Map Ver; 08/09/07/01
(Program Ver. is different
according to the upgrade
disc.)
14. Insert the map disc.
15. Touch the “NAVI/MENU”
button on the monitor.
16. Touch the “SETUP”
button on the screen.
17. Touch the “Download”
button on the screen.
Application Version : a07054_1200_E
Audio Micom Version : 06.12.05 & Tuner Area : EC2
LCD Micom Version : 06.12.26
ESS Version : 610301
Navigation Version : 08. 09. 10_V1. 6, MapVer: 08/09/07/01
CPLD Version : 06. 07. 04-00
LAN9600 S/W Version
Exit
This software upgrade DVD
disc only contains an UK
map. For other countries,
use the map disc to down-
load the desired map into
the memory.
Please refer to the manual
for downloading instruc-
tions. (Follow steps 14-22.)
WIDE NAVI
MENU
NAVI
7
18. Touch the map you want
to download.
19. Touch the “Download”
button.
20. Touch the “OK” button.
21. The map data from the
map disc is downloaded
into the memory of the
navigation unit.
22. Touch the “OK” button
when the installation is
completed.
P/N : MFL41647947
/