Duerkopp Adler 581 User manual

Brand
Duerkopp Adler
Model
581
Type
User manual

Duerkopp Adler 581 is an industrial sewing machine designed for creating precise and consistent buttonholes. It features an innovative "stop buttonhole to buttonhole" function, which allows users to sew multiple evenly spaced buttonholes with ease. Additionally, the machine offers adjustable stop positions, enabling users to customize the spacing between buttonholes. The Duerkopp Adler 581 is suitable for a wide range of fabrics and materials, making it a versatile tool for professional seamstresses and tailors.

Duerkopp Adler 581 is an industrial sewing machine designed for creating precise and consistent buttonholes. It features an innovative "stop buttonhole to buttonhole" function, which allows users to sew multiple evenly spaced buttonholes with ease. Additionally, the machine offers adjustable stop positions, enabling users to customize the spacing between buttonholes. The Duerkopp Adler 581 is suitable for a wide range of fabrics and materials, making it a versatile tool for professional seamstresses and tailors.

581
Additional Instructions
Stop “buttonhole to buttonhole”
All rights reserved.
Property of Dürkopp Adler GmbH and protected by copyright. Any reuse of these contents,
including extracts, is prohibited without the prior written approval of Dürkopp Adler GmbH.
Copyright © Dürkopp Adler GmbH 2020
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Table of Contents
Additional Instructions 581 - 00.0 - 11/2020 1
1 General information ...................................................................3
2 Assembly.....................................................................................4
2.1 Assembling the stop .....................................................................4
2.2 Adjusting the stop.........................................................................7
Table of Contents
2 Additional Instructions 581 - 00.0 - 11/2020
General information
Additional Instructions 581 - 00.0 - 11/2020 3
1 General information
The kit “Stop buttonhole to buttonhole” is intended for eyelet buttonhole
machines of the classes 580 and 581. The stop makes it possible to sew
multiple buttonholes with identical spacing.
Components of the kit
Check whether the scope of delivery for kit 0581 590004 is correct prior to
installation.
Part number Quantity Description
0580 592340 1 Stop on the right
0580 592350 1 Stop on the left
0580 592360 1 Base plate
0580 590330 1 Socket
0580 590340 1 Clip
9202 002497 2 Screw M5x16
9210 013367 1 Screw M5x10
9330 900107 2 Washer A5.3
0791 581717 EN 1 Additional Instructions
Assembly
4 Additional Instructions 581 - 00.0 - 11/2020
2 Assembly
Depending on the working method used, the stop can be assembled on
the left or the right side of the buttonholer.
These instructions describe the assembly on the left side.
Fig. 1: Assembly
2.1 Assembling the stop
Fig. 2: Assembling the stop (1)
To assemble the stop:
1. Loosen the screws (1).
2. Remove the cover (2)
(1) - Screws (2) - Cover
Stop on the left side Stop on the right side
①
②
Assembly
Additional Instructions 581 - 00.0 - 11/2020 5
Fig. 3: Assembling the stop (2)
3. Place the clip (3) on the holes of the fabric support plate (4).
Fig. 4: Assembling the stop (3)
4. Tighten the plate (5) using 2 screws (7) and washers (6).
(3) - Clip (4) - Fabric support plate
(5) - Plate
(6) - Washers
(7) - Screws
③
④
⑤⑥⑥⑦
Assembly
6 Additional Instructions 581 - 00.0 - 11/2020
Fig. 5: Assembling the stop (4)
5. Fasten the stop (10) to the plate (5) using the screw (8) and the socket (9)
- the larger diameter of the socket (9) must rest on the plate (5) at the top.
(5) - Plate
(8) - Screw
(9) - Socket
(10) - Stop
⑨⑩
⑧
⑤
Assembly
Additional Instructions 581 - 00.0 - 11/2020 7
2.2 Adjusting the stop
Fig. 6: Adjusting the stop
To adjust the stop:
1. Sew a buttonhole onto a seam pattern (3).
2. Mark the desired position of the second buttonhole on the seam
pattern (3).
3. Slip the previously sewn buttonhole over the stop (2).
4. Loosen the screw (1).
5. Shift the position of the seam pattern (3) with the stop (2) until
the marking lines up in the center between the fabric clamps (4).
6. Tighten the screw (1) again.
7. Sew the buttonhole and check the spacing - readjust the stop (2)
if necessary.
(1) - Screw
(2) - Stop
(3) - Seam pattern
(4) - Fabric clamps
④
③
①
②
①
②
③
④
Stop on the left side
Stop on the right side
Assembly
8 Additional Instructions 581 - 00.0 - 11/2020
DÜRKOPP ADLER GmbH
Potsdamer Str. 190
33719 Bielefeld
Germany
Phone: +49 (0) 521 925 00
Email: [email protected]m
www.duerkopp-adler.com
Subject to design changes - Part of the machines shown with additional equipment - Printed in Germany
© Dürkopp Adler GmbH - Additional Instructions - 0791 581717 EN - 00.0 - 11/2020
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Duerkopp Adler 581 User manual

Brand
Duerkopp Adler
Model
581
Type
User manual

Duerkopp Adler 581 is an industrial sewing machine designed for creating precise and consistent buttonholes. It features an innovative "stop buttonhole to buttonhole" function, which allows users to sew multiple evenly spaced buttonholes with ease. Additionally, the machine offers adjustable stop positions, enabling users to customize the spacing between buttonholes. The Duerkopp Adler 581 is suitable for a wide range of fabrics and materials, making it a versatile tool for professional seamstresses and tailors.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents