SMSC EVB-USB5534-01 User manual

Brand
SMSC
Model
EVB-USB5534-01
Type
User manual
SMSC EVB-USB5534-01 Revision 1.0 (06-19-13)
USER MANUAL
Copyright © 2013 SMSC or its subsidiaries. All rights reserved.
Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for
construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC
reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications
before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent
rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated
version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors
known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not
designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property
damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of
this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at http://www.smsc.com. SMSC is a registered
trademark of Standard Microsystems Corporation (“SMSC”). Product names and company names are the trademarks of their respective holders.
The Microchip name and logo, and the Microchip logo are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.
SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE
OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL
DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT;
TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD
TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
EVB-USB5534-01 Evaluation Board User Manual
EVB-USB5534-01 Evaluation Board User Manual
Revision 1.0 (06-19-13) 2 SMSC EVB-USB5534-01
USER MANUAL
Chapter 1 Overview
The EVB-USB5534-01 Revision E Evaluation Board is a demonstration and evaluation platform
featuring the SMSC USB5534B 4-port USB 3.0/2.0 hub on a 4-layer RoHS-compliant printed circuit
board. The USB5534B is fully compliant with the USB 3.0 USB Specification and supports SuperSpeed
(SS), Hi-Speed (HS), Full-Speed (FS), and Low-Speed (LS) USB signalling for complete coverage of
all defined USB operating speeds. All four of the downstream ports are USB 2.0 and USB 3.0
compliant. The EVB-USB5534-01 demonstrates driver compatibility with Microsoft Windows 8,
Windows 7, WinXP, Mac OS X 10.4+ and Linux Hub Drivers. The USB5534B is configured for
operation through internal default settings and supports custom configurations through SMBus or an
optional external 2-Mbit SPI Flash device, U7.
1.1 Features
USB5534B in a 64-pin QFN RoHS compliant package
USB 3.0 compliant (SS, HS, FS, and LS operation)
USB pins are 5 V tolerant
Self powered operation
Four downstream USB 2.0/3.0 ports
All downstream ports support individual port power and overcurrent sense
Optional onboard SPI Flash for external downloadable firmware
Low-cost 4-layer space saving design
Operates from one single voltage (+12.0 V, regulated) external power supply
Two GPIO LED indicators (LED0 and LED1)
Single 25 MHz crystal or external clock input
Single onboard +3.3 V, 0.5 Amp regulator
Single onboard +1.25 V, 3 Amp regulator
+3.3 V and port power LED indicators
EVB-USB5534-01 Evaluation Board User Manual
SMSC EVB-USB5534-01 3 Revision 1.0 (06-19-13)
USER MANUAL
Figure 1.1 Top and Bottom Level Silk Screen and Copper Layers
EVB-USB5534-01 Evaluation Board User Manual
Revision 1.0 (06-19-13) 4 SMSC EVB-USB5534-01
USER MANUAL
Chapter 2 Getting Started
The SMSC EVB-USB5534-01 is designed for flexible configuration solutions. It can be configured via
default internal register settings, downloadable external firmware to an onboard SPI Flash, or through
SMBus. When configured with the default internal register settings, the device operates as a USB
3.0/2.0 hub with four USB ports and SMSC’s standard VID/PID/DID settings.
2.1 Configuration Source - Internal Default
When the USB5534B does not detect a valid SPI Flash image or SMBus configuration upon power-
up, the EVB-USB5534-01 uses internal default register settings. It also sets the Vendor ID, Product ID,
Language ID, and Device ID, and additional settings from internal ROM code.
2.2 Configuration Source - External SPI Flash and SMBus
Upon power-up, the USB5534B first looks for an external SPI Flash device and a valid signature in
the flash. If one is found, the external ROM is enabled and code execution is initiated from the external
SPI device. If an SPI Flash device is not found, the firmware checks if the SMBus is enabled. The
SMBus can operate in either legacy mode (USB 2.0 only) or advanced mode (access to both USB 2.0
and USB 3.0 registers).
By default, the SPI Flash (U7) is populated. The 10 k
 pull-up resistors R20 and R24 must also be
populated to use external flash. R31 must be populated to select 60MHz SPI operation, rather than
30MHz operation. There is also an alternative SPI 8-pin DIP option available that is not populated by
default. To use a DIP SPI flash chip, remove U7 and solder down the flash chip or a DIP8 socket in
the SKT1 footprint (see Figure 2.1). The external flash can be programmed using the SMSC ProTouch
MPT software tool which can be download from the smsc.com E-Services portal.
Figure 2.1 Notable Component Locations
J8
U7
SKT1
EVB-USB5534-01 Evaluation Board User Manual
SMSC EVB-USB5534-01 5 Revision 1.0 (06-19-13)
USER MANUAL
SMBus data and clock can be controlled via the onboard SMBus header, J6. To enable SMBus, pins
1 and 2 must be shorted on the J8 SMBus Man. EN header, which pulls SM_CLK high. An Aardvark
tool will pull SM_CLK high when connected to the SMBus header, and J8 does not need to be shorted.
When SMBus is enabled, the USB5534B configures the GPIOs to act as an SMBus slave. As an
SMBus slave, the USB5534B will wait indefinitely for the SMBus configuration. If no external options
are detected, the it will be configured from the internal default registers.
Note: Refer to the Protouch MPT User Manual on using this software to program the configuration.
2.3 Power Source - Self-Powered
The EVB-USB5534-01 only supports self-powered operation, and is powered through one +12.0 V
regulated 'wall wart' external power supply. The +12.0 V ‘wall wart’ plugs into the 2.5 mm connector
J5 on the board. Alternatively, an external voltage can be injected onto the J7 Ext. 12 V header, which
is not populated by default. The +12.0 V feeds a 6 A regulator which outputs +5.0 V across the board.
This +5.0 V output controls the +3.3 V and +1.25 V onboard regulators.
2.4 Downstream Port Power Control
All four USB downstream port powers are controlled via two 1 A port power devices (AP2176S). All
four downstream ports have individual overcurrent sensing available and all sensing signals are pulled
high to +3.3 V through external 10 k
resistors. The port power devices, U2 and U4, are enabled
through the PRT_CTL[4:1] signals on the USB5534B. The overcurrent sense signals from the port
power devices are monitored on the OCS[4:1] pins of the USB5534B.
2.5 Conclusion
The EVB-USB5534-01 provides the necessary requirements and interface options for evaluating the
USB5534B four port SuperSpeed USB hub controller. This will allow the user to gain a complete
understanding of the product, and accelerate the integration of the USB5534B into the user’s design.
EVB-USB5534-01 Evaluation Board User Manual
Revision 1.0 (06-19-13) 6 SMSC EVB-USB5534-01
USER MANUAL
Figure 2.2 EVB-USB5534-01 Schematic Page 1
5
5
4
4
3
3
2
2
1
1
D D
C C
B B
A A
Port 1
Port 2
Port 3
Port 4
"LED0"
"PPWR1"
"PPWR2"
"PPWR3"
"PPWR4"
Optional
SPI Option
LED1 Option
"LED1"
Manual
SMBus EN
Optional TH SPI Socket
SMBus I/F
*Note that the SS signal pair Tx+/ are polarity
swapped on J0 for better routing.
The same is true for the SS pair Rx+/-.
*Note:
System should supply
RESETn in an embedded
hub implementation.
VBUS_UP
USB_DM_UP
USB_DP_UP
SSTXM_C_UP
PWR1
PWR2
PWR3
PWR4
SSTXP_C_UP
USB_SSTXP_UP
USB_SSTXM_UP
PWR4
PWR2
RESETn
LED0
PWR3
R4
R2
R3
R1
OCS1
OCS2
OCS3
OCS4
PPWR1
PPWR3
PPWR4
PPWR2
XTAL2
XTAL1
SSTXM_C_DN2
SSTXP_C_DN2USB_SSTXP_DN2
USB_SSTXM_DN2
SSTXM_C_DN3
SSTXP_C_DN3
USB_SSTXM_DN3
USB_SSTXP_DN3
USB_SSRXM_DN1
USB_SSRXP_DN1
USBDN_DM1
USBDN_DP1
USB_SSRXM_DN2
USB_SSRXP_DN2
USBDN_DM2
USBDN_DP2
USB_SSRXP_DN3
USB_SSRXM_DN3
USBDN_DM3
USBDN_DP3
SSTXM_C_DN1
SSTXP_C_DN1USB_SSTXP_DN1
USB_SSTXM_DN1
SSTXM_C_DN4
SSTXP_C_DN4USB_SSTXP_DN4
USB_SSTXM_DN4
USBDN_DP4
USBDN_DM4
USB_SSRXM_DN4
USB_SSRXP_DN4
SM_CLK
PWR1
SM_DAT
RBIAS
ATEST
nHOLD
SPI_nCE
SPI_SCK
SPI_MOSI
SPI_MISO
TEST
RESETn
SM_CLK
SM_DAT
USB_SSRXM_UP
USB_SSRXP_UP
SPI_MISO
SPI_nCE
nWP
nHOLD
SPI_SCK
SPI_MOSI
VBUS_DET
VBUS_DET
nWP
VDD33
5V
VDD12
3V3
3V3
VDD33
VDD12
3V3
3V3
3V3
Title:
Size:
Part Number:
Rev
Date: Sheet
of
SMSC - Austin
10900-B Stonelake Blvd.
Austin, TX 78759
512.502.0070
Project
Name:
EVB-USB5534-01
E
Evaluation Board for USB5534, QFN64
B
23
Friday, March 08, 2013
Mountie
Title:
Size:
Part Number:
Rev
Date: Sheet
of
SMSC - Austin
10900-B Stonelake Blvd.
Austin, TX 78759
512.502.0070
Project
Name:
EVB-USB5534-01
E
Evaluation Board for USB5534, QFN64
B
23
Friday, March 08, 2013
Mountie
Title:
Size:
Part Number:
Rev
Date: Sheet
of
SMSC - Austin
10900-B Stonelake Blvd.
Austin, TX 78759
512.502.0070
Project
Name:
EVB-USB5534-01
E
Evaluation Board for USB5534, QFN64
B
23
Friday, March 08, 2013
Mountie
USB 3.0
A-REC
THRU
J2
USB 3.0
A-REC
THRU
J2
Vbus
1
D-
2
D+
3
GND1
4
ShL2
12
ShR2
13
SSRX+
6
SSRX-
5
GND2
7
SSTX+
9
SSTX-
8
ShR1
11
ShL1
10
R20
10K
R20
10K
C31
6pF
C31
6pF
R8
330
R8
330
U7
SPI_FLASH-25X20_SO8
U7
SPI_FLASH-25X20_SO8
CS
1
SO
2
WP
3
HOLD
7
SCK
6
SI
5
VCC
8
GND
4
R13
10K
R13
10K
Y1
25MHz
Y1
25MHz
13
R27
100K
R27
100K
C23
0.1uF
C23
0.1uF
C25
4.7uF
DNP
C25
4.7uF
DNP
C28
0.1uF
C28
0.1uF
+
C17 100uF
+
C17 100uF
R16
12.0K
1%
R16
12.0K
1%
C2 0.1uFC2 0.1uF
C6
0.1uF
C6
0.1uF
TP1TP1
USB 3.0
A-REC
THRU
J4
USB 3.0
A-REC
THRU
J4
Vbus
1
D-
2
D+
3
GND1
4
ShL2
12
ShR2
13
SSRX+
6
SSRX-
5
GND2
7
SSTX+
9
SSTX-
8
ShR1
11
ShL1
10
R4 330R4 330
R2 330R2 330
LED2 GRNLED2 GRN
USB 3.0
A-REC
THRU
J1
USB 3.0
A-REC
THRU
J1
Vbus
1
D-
2
D+
3
GND1
4
ShL2
12
ShR2
13
SSRX+
6
SSRX-
5
GND2
7
SSTX+
9
SSTX-
8
ShR1
11
ShL1
10
C8 0.1uFC8 0.1uF
LED3 GRNLED3 GRN
C4 0.1uFC4 0.1uF
C60
0.1uF
C60
0.1uF
R29 330R29 330
C38
0.1uF
C38
0.1uF
+
C10 100uF
+
C10 100uF
USB 3.0
microAB
REC
smt &
th tabs
J0
USB 3.0
microAB
REC
smt &
th tabs
J0
Vbus
1
D-
2
D+
3
GND1
5
ShP1
13
SSRX+
10
SSRX-
9
GND2
8
SSTX+
7
SSTX-
6
ShR
12
ShL
11
id
4
ShP2
14
ShP3
15
ShP4
16
C35
4.7uF
DNP
C35
4.7uF
DNP
LED9
GRN DNP
LED9
GRN DNP
C21
0.1uF
C21
0.1uF
R11
10K
R11
10K
(gnd)
(nc/5V)
(nc/5V)
(mosi)
(gnd)
(ss2/scl)
(ss3/sda)
(miso)
(sclk)
(ss1)
J6
Aardvark_I/F
(gnd)
(nc/5V)
(nc/5V)
(mosi)
(gnd)
(ss2/scl)
(ss3/sda)
(miso)
(sclk)
(ss1)
J6
Aardvark_I/F
1
34
2
56
78
910
U4 AP2176S_SO8
(1 A)
U4 AP2176S_SO8
(1 A)
IN
7
ENA
1
OUTA
8
OUTB
5
FLAGA
2
ENB
4
GND
6
FLAGB
3
C5
0.1uF
C5
0.1uF
C49
0.1uF
C49
0.1uF
C30
1.0nF
C30
1.0nF
C7
0.1uF
C7
0.1uF
C24
0.1uF
C24
0.1uF
R35
10K
R35
10K
R10
10K
R10
10K
C9 0.1uFC9 0.1uF
R5
330
R5
330
C3 0.1uFC3 0.1uF
R6
330
R6
330
C22
1.0nF
C22
1.0nF
C33
1.0nF
C33
1.0nF
C44
0.1uF
C44
0.1uF
R23
10K
R23
10K
R22
100K
R22
100K
C12 0.1uFC12 0.1uF
LED7
GRN
LED7
GRN
SKT1
DIP8
Socket
SKT1
DIP8
Socket
1
2
3
4
6
7
8
5
R24
10K
R24
10K
R3 330R3 330
Upstream
OCS / JTAG / UART
Downstream
Clock
SPI / I2C
Bias/Test
Power
Reset
Port Power Control
SMBUS
(Fill the GND FLAG with
at least 20 GND vias.)
U1 USB5534B_QFN64
Upstream
OCS / JTAG / UART
Downstream
Clock
SPI / I2C
Bias/Test
Power
Reset
Port Power Control
SMBUS
(Fill the GND FLAG with
at least 20 GND vias.)
U1 USB5534B_QFN64
USB2DM_UP
54
SPI_CLK/GPIO4
40
RESET
50
SPI_DO/GPIO5/SPI_SPD_SEL
41
XTALIN/CLK_IN
62
RBIAS
64
GND(FLAG)
65
VDD33
16
XTALOUT
61
USB3DM_TXUP
56
USB3DP_TXUP
55
USB3DM_RXUP
59
USB3DP_RXUP
58
TEST
49
VDD12
5
VDD12
8
VDD12
13
VDD12
21
VDD12
28
VDD12
31
VDD12
51
VDD12
57
VDD33
34
VDD33
52
VDD33
63
USB3DP_TXDN1
3
USB2DM_DN1
2
USB3DM_TXDN1
4
USB2DP_DN1
1
USB3DM_RXDN1
7
USB3DP_RXDN1
6
USB2DM_DN2
10
USB3DP_RXDN2
14
USB3DM_TXDN2
12
USB3DP_TXDN2
11
USB2DP_DN2
9
USB3DM_RXDN2
15
USB3DP_RXDN3
22
USB2DM_DN3
18
USB3DP_TXDN3
19
USB3DM_TXDN3
20
USB3DM_RXDN3
23
USB2DP_DN3
17
USB3DM_TXDN4
27
USB3DP_RXDN4
29
USB2DM_DN4
25
USB2DP_DN4
24
USB3DM_RXDN4
30
USB3DP_TXDN4
26
SPI_DI
42
TCK/LED1/GPIO1/OCS1
46
TDI/GPIO6/OCS3
44
TDO/GPIO7/OCS4
43
TRST/GPIO0/LED0
45
TMS/GPIO3/OCS2
47
ATEST
60
SPI_CE
39
SM_CLK/GPIO13
38
SM_DAT/GPIO12
37
PRT_CTL4/GPIO11
32
PRT_CTL3/GPIO10
33
PRT_CTL2/GPIO9
35
PRT_CTL1/GPIO8
36
VBUS_DET/GPIO2
48
USB2DP_UP
53
R1 330R1 330
R28 330
DNP
R28 330
DNP
C19 0.1uFC19 0.1uF
R21
10K
R21
10K
C52 0.1uFC52 0.1uF
C16 0.1uFC16 0.1uF
U2 AP2176S_SO8
(1 A)
U2 AP2176S_SO8
(1 A)
IN
7
ENA
1
OUTA
8
OUTB
5
FLAGA
2
ENB
4
GND
6
FLAGB
3
J8
DNP
J8
DNP
12
LED4 GRNLED4 GRN
C36
6pF
C36
6pF
C20 0.1uFC20 0.1uFC59 1.0nFC59 1.0nF
C27
0.1uF
C27
0.1uF
LED1 GRNLED1 GRN
C15 0.1uFC15 0.1uF
+
C11 100uF
+
C11 100uF
R17
ZERO
R17
ZERO
C63 0.1uFC63 0.1uF
C18
0.1uF
C18
0.1uF
USB 3.0
A-REC
THRU
J3
USB 3.0
A-REC
THRU
J3
Vbus
1
D-
2
D+
3
GND1
4
ShL2
12
ShR2
13
SSRX+
6
SSRX-
5
GND2
7
SSTX+
9
SSTX-
8
ShR1
11
ShL1
10
C48
0.1uF
C48
0.1uF
C13 0.1uFC13 0.1uF
C32
1.0nF
C32
1.0nF
C37
0.1uF
C37
0.1uF
R25 100KR25 100K
C55
0.1uF
C55
0.1uF
R30
330
R30
330
C51 0.1uFC51 0.1uF
R12
10K
R12
10K
TP2TP2
C41
0.1uF
C41
0.1uF
C53
0.1uF
C53
0.1uF
C34
0.1uF
C34
0.1uF
C58
4.7uF
C58
4.7uF
R31
10K
R31
10K
C1 0.1uFC1 0.1uF
C29
0.1uF
C29
0.1uF
R7
330
R7
330
+
C26
100uF
+
C26
100uF
+
C14 100uF
+
C14 100uF
R32
100K
R32
100K
EVB-USB5534-01 Evaluation Board User Manual
SMSC EVB-USB5534-01 7 Revision 1.0 (06-19-13)
USER MANUAL
Figure 2.3 EVB-USB5534-01 Schematic Page 2
5
5
4
4
3
3
2
2
1
1
D D
C C
B B
A A
5V Regulator, <6A
Ext. 12V
Note:
Jumper selections marked with
an asterisk (*) are default settings.
1V25 Regulator, 1A
"3V3 Present"
3V3 Regulator, 500 mA
Optional Alternate 3V3 Regulator
BOM Changes for MIC37102:
C_3V3-IN, 1.0 uF -> 4.7 uF
C_3V3-OUT, 4.7 uF -> 10 uF
C_3V3-IN
C_3V3-OUT
12V_EXT
EN12
5V_REG_3V3
5V_REG_1V2
EN3
5V_REG_3V3
EN3
3V3
5V 3V3
VDD12
VDD33
3V3
3V3
VDD12
Title:
Size:
Part Number:
Rev
Date: Sheet
of
SMSC - Austin
10900-B Stonelake Blvd.
Austin, TX 78759
512.502.0070
Project
Name:
EVB-USB5534-01
E
Evaluation Board for USB5534, QFN64
B
33
Tuesday, February 12, 2013
Mountie
Title:
Size:
Part Number:
Rev
Date: Sheet
of
SMSC - Austin
10900-B Stonelake Blvd.
Austin, TX 78759
512.502.0070
Project
Name:
EVB-USB5534-01
E
Evaluation Board for USB5534, QFN64
B
33
Tuesday, February 12, 2013
Mountie
Title:
Size:
Part Number:
Rev
Date: Sheet
of
SMSC - Austin
10900-B Stonelake Blvd.
Austin, TX 78759
512.502.0070
Project
Name:
EVB-USB5534-01
E
Evaluation Board for USB5534, QFN64
B
33
Tuesday, February 12, 2013
Mountie
C45
1.0uF
C45
1.0uF
D1 MMBD914D1 MMBD914
MT2MT2
C50
10uF
C50
10uF
FB1
2A/0.05DCR
DNP
FB1
2A/0.05DCR
DNP
C39
0.1uF
C39
0.1uF
J7
DNP
J7
DNP
12
R19
ZERO
R19
ZERO
TP3TP3
LED5
Red
LED5
Red
R9
330
R9
330
R15
1.91K
1%
R15
1.91K
1%
U3
3_Amp
U3
3_Amp
GND
3
VIN
2
ENABLE
1
TRIM
5
VOUT
4
C43
0.1uFDNP
C43
0.1uFDNP
J5
2.5 mm
J5
2.5 mm
1
2
3
C56
4.7uF
C56
4.7uF
TP4TP4
R26
267
1%
R26
267
1%
TP5TP5
R18
47K
R18
47K
C40
10uF
C40
10uF
FB4
2A/0.05DCR
FB4
2A/0.05DCR
U5
PQ1LA335MSPQ
U5
PQ1LA335MSPQ
IN
4
OUT
5
SHDn
3
GND
2
NR
1
FB2
2A/0.05DCR
DNP
FB2
2A/0.05DCR
DNP
C61
0.1uF
C61
0.1uF
U8
MIC37102-ADJ_SOIC8
U8
MIC37102-ADJ_SOIC8
GND
5
VIN
2
OUT
3
EN
1
ADJ
4
GND
6
GND
7
GND
8
FB3
2A/0.05DCR
FB3
2A/0.05DCR
R14
29.4K
1%
R14
29.4K
1%
MT1MT1
C47
0.1uF
C47
0.1uF
U6
6_Amp
U6
6_Amp
GND
3
VIN
2
ENABLE
1
TRIM
5
VOUT
4
R33
267
1%
R33
267
1%
C42
10uF
16V
C42
10uF
16V
C62
1.0nF
C62
1.0nF
TP6TP6
R34 160
1%
R34 160
1%
C57
10uF
25V
C57
10uF
25V
C46
1.0uF
C46
1.0uF
C54
1.0nF
C54
1.0nF
EVB-USB5534-01 Evaluation Board User Manual
Revision 1.0 (06-19-13) 8 SMSC EVB-USB5534-01
USER MANUAL
Figure 2.4 EVB-USB5534-01 Bill of Materials
Item Qty Qty
Pop'd
Reference Designator(s) Description Manufacturer Manufacturer Part Number Notes
11 1
U1 IC, USB5534B, USB 2.0 and 3.0 Hub, 4-
p
ort, QFN64 SMSC USB5534B
_
QFN64
Supplied by SMSC
2 38 38 C1,C2,C3,C4,C5,C6,C7,C8,C9,
C12,
C13,C15,C16,C18,C19,C20,C2
1,C23,
C24,C27,C28,C29,C34,C37,C3
8,C39,
C41,C44,C47,C48,C49,C51,C5
2,C53, C55,C60,C61,C63
Capacitor, 0.1uF, 10V, 10%, X5R, 0402 Murata GRM155R71A104KA01D
3 5 5 C10,C11,C14,C17,C26 Capacitor, Low ESR, 100uF, 6.3VDC, 20%, Aluminum, Radial-SMT, 5mm x 5.8mm United Chemi-Con EMZA6R3ADA101ME61G
4 7 7 C22,C30,C32,C33,C54,C59,C6
2
Capacitor, 1000pF, 50V, 10%, X7R, 0402 Murata GRM155R71H102KA01D
5 2 2 C31,C36 Capacitor, 6pF, 50V, +/-0.5pF, NPO, 0402 Murata GRM1555C1H6R0DZ01D
6 2 2 C40,C50 Capacitor, 10uF, 6.3VDC, 20%, X5R, 0603 Murata GRM188R60J106ME47D
7 1 1 C42 Capacitor, 10uF, 16VDC, 10%, 0805 Murata GRM21BR61C106KE15L
8 2 2 C45,C46 Capacitor, 1.0uF, 16VDC, 10%, X5R, 0603 Murata GRM188R61C105KA93D
9 2 2 C56,C58 Capacitor, 4.7uF, 6.3VDC, 20%, X5R, 0603 Murata GRM188R60J475KE19D
10 1 1 C57 Capacitor, 10uF, 25 VDC, 10%, 0805 Murata GRM21BR61E106KA73L
11 1 1 D1 Diode, MMBD914LT, Fast Switching, 100VDC, 200mA, SOT-23 On Semiconductors MMBD914LT1
12 2 2 FB3,FB4 Ferrite Bead, 220 Ohm, 2A, 0.05DCR, 0603 Murata BLM18EG221SN1D
13 1 1 J0 Receptacle, USB 3.0, Style MicroB, Right Angle, SMT, TH Tabs Kycon KMMX-B10-SMT1SB30TR
14 4 4 J1,J2,J3,J4 Receptacle, USB 3.0, Style A, Right Angle, Through-hole Amphenol GSB311131HR
15 1 1 J5 Connector, Power Jack, 2.5 mm x 5.5 mm, 12 V, 4 A, Right Angle, TH Cui Stack PJ-002BH
16 1 1 J6 Header, 2 x 5, 0.1 Inch, Vertical AMP 146256-5
Cut from long header
17 5 5 LED1,LED2,LED3,LED4,LED7 LED, Green, 3mm, Diffused, 0.2" CL-vert, TH, Right Angle
Lumex SSF-LXH103GD
18 1 1 LED5 LED, Red, 3mm, Diffused, 0.2" CL-vert, TH, Right Angle Lumex SSF-LXH103ID
19 11 11 R1,R2,R3,R4,R5,R6,R7,R8,R9,
R29, R30
Resistor, 330, 5%, 1/16W, 0603 Panasonic ERJ-3GEYJ331V
20 10 10 R10,R11,R12,R13,R20,R21,R2
3,R24, R31,R35
Resistor, 10K, 5%, 1/16W, 0603 Panasonic ERJ-3GEYJ103V
21 1 1 R14 Resistor, 29.4K, 1%, 1/10W, 0603 Panasonic ERJ-3EKF2942V
22 1 1 R15 Resistor, 1.91K, 1%, 1/10W, 0603 Stackpole Electronics RMCF0603FT1K91
23 1 1 R16 Resistor, 12.0K, 1%, 1/16W, 0603 Panasonic ERJ-3EKF1202V
24 2 2 R17,R19 Resistor, ZERO, 0.1W, 0603 Panasonic ERJ-3GEY0R00V
25 1 1 R18 Resistor, 47K, 5%, 1/16W, 0603 Yageo America 9C06031A4702JLHFT
26 4 4 R22,R25,R27,R32 Resistor, 100K, 5%, 1/16W, 0603 Panasonic ERJ-3GEYJ104V
27 1 1 R26 Resistor, 267, 1%, 1/10W, 0603 Panasonic ERJ-3EKF2670V
28 2 2 U2,U4 IC, Power Distribution Switch, Dual, 1 A continuous, SO-8 Diodes Inc. AP2176SG-13
29 1 1 U3 IC, DC-DC Converter Module, 0.591-6 Vout, ~12 Vin, 0.591-6 VDC out, 3A, 5 pin SIP, 0.41" Wide Murata OKR-T/3-W12-C
30 1 1 U5 IC, PQ1LA335MSPQ, Voltage Regulator, 3.3V, 500mA, Low Dropout, SOT-89-5 Sharp PQ1LA335MSPQ
31 1 1 U6 IC, DC-DC Converter Module, 0.591-6 Vout, ~12 Vin, 0.591-6 VDC out, 6A, 5 pin SIP, 0.41" Wide Murata OKR-T/6-W12-C
32 1 1 U7
IC, '25x20, 2Mb (256K x 8) SPI Serial FLASH, 2.5V-3.3V, 75MHz, Dual Read, SO8 Winbond
W25X20BVSNIG
33 1 1 Y1 Crystal, 25.000MHz, 30ppm, 6pF, SMT 2.0MM X 1.6MM Murata XRCGB25M000F3M00R0
34 4 4
-none Foot, Silicone Rubber, Adhesive, Clear, Cylindrical, .500"x.250"
Bumper Specialties RBS-6
Place at each Board
corner on the bottom
side
EVB-USB5534-01 Evaluation Board User Manual
SMSC EVB-USB5534-01 9 Revision 1.0 (06-19-13)
USER MANUAL
Chapter 3 User Manual Revision History
Table 3.1 Revision History
REVISION LEVEL & DATE SECTION/FIGURE/ENTRY CORRECTION
Rev. 1.0 (06-19-13) Document Release
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

SMSC EVB-USB5534-01 User manual

Brand
SMSC
Model
EVB-USB5534-01
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents