LG 34GL750-B Owner's manual

* LG LED Monitor applies LCD screen with LED

backlights.

Please read this manual carefully before operating

your set and retain it for future reference.

34GL750

34GN73A

www.lg.com

OWNER’S MANUAL

(LED Monitor*)

2

ENGLISH

2

TABLE OF CONTENTS

LICENSE .......................................3

OPEN SOURCE SOFTWARE

NOTICE INFORMATION ..............4

ASSEMBLING AND PREPARING 4

- Supported Drivers and Software .........................5

- Product and Button Description...........................5

How to Use the Joystick Button

- Moving and Lifting the Monitor............................6

Installing on a Table

Adjusting the Stand Height

Adjusting the Angle

Tidying up Cables

Using the Kensington Lock

Installing the Wall Mount Plate

Installing on the Wall

USING THE MONITOR .............. 14

- Connecting to a PC...................................................15

HDMI Connection

DisplayPort Connection

- Connecting AV Devices ...........................................16

HDMI Connection

- Connecting Peripherals...........................................16

USB Cable connection (For 34GN73A)

Connecting Headphones

USER SETTINGS ....................... 18

- Activating the Main Menu ....................................18

Main Menu Features

- User Settings ...............................................................20

Menu Settings

TROUBLESHOOTING ................ 31

PRODUCT SPECIFICATION ...... 34

- Factory Support Mode............................................38

- HDMI Timing (Video) ................................................39

- Power LED ..................................................................... 39

3

ENGLISH

LICENSE

Each model has different licenses. Visit www.lg.com for more information on the license.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of

HDMI Licensing Administrator, Inc.

4

ENGLISH

OPEN SOURCE SOFTWARE

NOTICE INFORMATION

To obtain the source code under GPL, LGPL, MPL, and other open source licenses,

that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and

copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge

covering the cost of performing such distribution (such as the cost of media,

shipping, and handling) upon email request to opensourc[email protected].

This offer is valid for a period of three years after our last shipment of this product.

This offer is valid to anyone in receipt of this information.

ASSEMBLING AND PREPARING

CAUTION

• Always use genuine LG components to ensure safety and product performance.

• The product warranty will not cover damage or injury caused by the use of

unauthorized components.

• It is recommended that use the supplied components.

• If you use generic cables not certified by LG, the screen may not display or there

may be image noises.

• Illustrations in this document represent typical procedures, so they may look

different from the actual product.

• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when

assembling the product. (Doing so may damage the product.)

• Applying excessive force when tightening screws may cause damage to the

monitor. Damage caused in this way will not be covered by the product warranty.

• Do not carry the monitor upside down by just holding the base. This may cause the

monitor to fall off the stand and could result in personal injury.

• When lifting or moving the monitor, do not touch the monitor screen. The force

applied to the monitor screen may cause damage to it.

• For wave pattern on appearance, unlike the general method of coating, it’s applied

to added glittering material in raw material.With no peeled-off appearance, it has

good durability. Please use it with conﬁdence because there is no problem in using

the product at all.

NOTE

• The components may look different from those illustrated here.

• Without prior notice, all product information and specifications contained in this

manual are subject to change to improve the performance of the product.

• To purchase optional accessories, visit an electronics store or an online shopping

site, or contact the retailer from which you purchased the product.

• The power cord provided may differ depending upon the region.

5

ENGLISH

Supported Drivers and Software

You can download and install the latest version from the LGE website (www.lg.com).

Drivers and Software Installation Priority

Monitor Driver Recommended

OnScreen Control Recommended

Product and Button Description

Joystick Button

6

ENGLISH

How to Use the Joystick Button

You can easily control the functions of the monitor by pressing the joystick button or

moving it left/right with your finger.

Basic Functions

Power on

Press the joystick button once with

your finger to turn on the monitor.

Power off

Press and hold the joystick button

once with your finger to turn off the

monitor.

/

Volume

control

You can control the volume by moving

the joystick button left/right.

/

Controls

screen

brightness

You can control the screen’s brightness

by moving the joystick button up/down.

NOTE

• The joystick button is located at the bottom of the monitor.

Moving and Lifting the Monitor

When moving or lifting the monitor, follow these instructions to prevent the monitor

from being scratched or damaged and to ensure safe transportation, regardless of

its shape or size.

• Place the monitor in the original box or packing material before attempting to

move it.

• Before moving or lifting the monitor, disconnect the power cord and all other

cables.

• Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.

7

ENGLISH

• If you use the monitor panel without the stand base, its joystick button may cause

the monitor to become unstable and fall, resulting in damage to the monitor or

human injury. In addition, this may cause the joystick button to malfunction.

• When holding the monitor, the screen should face away from you to prevent it

from being scratched.

• When transporting the monitor, do not expose the monitor to shock or excessive

vibration.

• When moving the monitor, keep it upright and never turn the monitor on its side or

tilt it sideways.

CAUTION

• Avoid touching the monitor screen as much as possible.

- This may result in damage to the screen or some of the pixels used to create

images.

8

ENGLISH

Installing on a Table

• Lift the monitor and place it on the table in an upright position. Place the monitor

at least 100mm (3.94 inches) away from the wall to ensure sufficient ventilation.

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

CAUTION

• Unplug the power cord before moving or installing the monitor. There is risk of

electric shock.

• Make sure to use the power cord that is provided in the product package and

connect it to a grounded power outlet.

• If you need another power cord, please contact your local dealer or the nearest

retail store.

9

ENGLISH

Adjusting the Stand Height

1 Place the monitor mounted on the stand base in an upright position.

2 Handle the monitor with both hands for safety.

Max. 120.0 mm (4.72 inches)

WARNING

• When adjusting the screen height, do not place your hand on

the stand body to avoid injury to your fingers.

Adjusting the Angle

1 Place the monitor mounted on the stand base in an upright position.

2 Adjust the angle of the screen.

The angle of the screen can be adjusted forward or backward from -5° to 20° for a

comfortable viewing experience.

Front

Rear

-520

10

ENGLISH

WARNING

• To avoid injury to the fingers when adjusting the screen, do not hold the lower part

of the monitor’s frame as illustrated below.

-520

• Be careful not to touch or press the screen area when adjusting the angle of the

monitor.

-520

NOTE

• The left or right side of the monitor head can be slightly rotated up or down (up to

3°). Adjust the horizontal level of the monitor head.

Monitor head

11

ENGLISH

Tidying up Cables

Arrange the cables using the cable holder as shown in the illustration.

Mouse Holder

Cable Holder

Using the Kensington Lock

The connector for the Kensington security system is located at the bottom of the

monitor.

For more information on installation and usage, refer to the Kensington lock owner’s

manual or visit the website at http://www.kensington.com.

Connect the monitor to a table using the Kensington security system cable.

NOTE

• The Kensington security system is optional. You can obtain optional accessories

from most electronics stores.

12

ENGLISH

Installing the Wall Mount Plate

This monitor meets the specifications for the wall mount plate or other compatible

devices.

1 Place the screen face down. To protect the monitor panel (screen), cover the

surface with a soft cloth or the monitor protection pad included in the product

package.

2 Remove the four screws tightened on the back of the monitor.

3 Place the wall mount plate onto the monitor and align it with the screw holes.

4 Tighten the four screws using a screwdriver to fix the plate to the monitor.

NOTE

• The wall mount plate is sold separately.

• For more information on installation, refer to the wall mount plate’s installation

guide.

• Be careful not to apply too much force while mounting the wall mount plate as it

may cause damage to the screen.

Installing on the Wall

Install the monitor at least 100mm (3.94 inches) away from the wall and leave

about 100mm (3.94 inches) of space at each side of the monitor to ensure

sufficient ventilation. Detailed installation instructions can be obtained from your

local retail store. Alternatively, please refer to the manual for how to install and set

up a tilting wall mounting bracket.

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

100 mm

(3.94 inches)

13

ENGLISH

To install the monitor to a wall, attach a wall mounting bracket (optional) to the back

of the monitor.

Make sure that the wall mounting bracket is securely fixed to the monitor and to the

wall.

1 If you use screws longer than the standard length, it may damage the inside of

the product.

2 A non-VESA standard screw may damage the product and cause the monitor

to fall. LG Electronics is not liable for any accidents relating to the use of non-

standard screws.

Wall Mount (mm) 100 x 100

Standard screw M4 x L10

Number of screws 4

Wall Mount Plate (Optional) LSW 149

NOTE

• Use the screws specified by VESA standards.

• The wall mount kit includes the installation guide and all necessary parts.

• The wall mounting bracket is optional. You can obtain optional accessories from

your local dealer.

• The length of the screw may differ for each wall mounting bracket. Be sure to use

the proper length.

• For more information, please refer to the user manual for the wall mounting

bracket.

CAUTION

• Unplug the power cord before moving or installing the monitor to avoid electric

shock.

• Installing the monitor on the ceiling or on a slanted wall may result in the monitor

falling off, which could lead to injury. Use an authorized LG wall mount and contact

the local dealer or qualified personnel.

• Applying excessive force when tightening screws may cause damage to the

monitor. Damage caused in this way will not be covered by the product warranty.

14

ENGLISH

• Use the wall mounting bracket and screws that conform to VESA standards.

Damage caused by the use or misuse of inappropriate components will not be

covered by the product warranty.

• When measured from the back of the monitor, the length of each installed screw

must be 8 mm (0.3 inches) or less.

Wall Mount Plate

Back of the Monitor

Screw

Dimensions

: M4 x L10

Wall Mount Plate

Back of the

Monitor

Max. 8 mm (0.3 inches)

USING THE MONITOR

• Illustrations in this manual may differ from the actual product.

Press the joystick button, go to Settings → Input, and then select the input option.

CAUTION

• Do not press the screen for a prolonged time. This may cause image distortion.

• Do not display a still image on the screen for a prolonged time. This may cause

image retention. Use a screensaver if possible.

NOTE

• When connecting the power cord to the outlet, use a grounded (3-hole) power

strip or a grounded power outlet.

• The monitor may flicker when turned on in an area where the temperature is low.

This is normal.

• Sometimes red, green, or blue spots may appear on the screen. This is normal.

15

ENGLISH

Connecting to a PC

• This monitor supports the *Plug and Play feature.

* Plug and Play: A feature that allows you to add a device to your computer without

having to reconfigure anything or install any manual drivers.

HDMI Connection

Transmits digital video and audio signals from your PC to the monitor.

CAUTION

• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility

issues.

• Use a certified cable with the HDMI logo attached. If you do not use a certified

HDMI cable, the screen may not display or a connection error may occur.

• Recommended HDMI cable types

- High-Speed HDMI

®

/

TM

cable

- High-Speed HDMI

®

/

TM

cable with Ethernet

DisplayPort Connection

Transmits digital video and audio signals from your PC to the monitor.

NOTE

• There may be no video or audio output depending on the DP (DisplayPort) version

of the PC.

• If you are using a Mini DisplayPort output graphics card, use a Mini DP to DP (Mini

DisplayPort to DisplayPort) cable or gender that supports DisplayPort1.2 or 1.4.

(Sold separately)

16

ENGLISH

Connecting AV Devices

HDMI Connection

HDMI transmits digital video and audio signals from your AV device to the monitor.

NOTE

• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility

issues.

• Use a certified cable with the HDMI logo attached. If you do not use a certified

HDMI cable, the screen may not display or a connection error may occur.

• Recommended HDMI cable types

- High-Speed HDMI

®

/

TM

cable

- High-Speed HDMI

®

/

TM

cable with Ethernet

Connecting Peripherals

USB Cable connection (For 34GN73A)

The USB port on the product functions as a USB hub.

To use USB 3.0, connect the A-B type USB 3.0 cable of the product to the PC.

Peripheral devices connected to the USB IN port can be controlled from the PC.

NOTE

• Make sure to install the most recent Windows OS service pack before using the

product.

• Peripheral devices are sold separately.

• A keyboard, mouse, or USB device can be connected to the USB port.

CAUTION

Cautions When Using a USB Device

• A USB device with an automatic recognition program installed, or that uses its own

driver, may not be recognized.

• Some USB devices may not be supported or may not work properly.

• It is recommended to use a USB hub or hard disk drive with power supplied. (If the

power supply is not adequate, the USB device may not be recognized properly.)

17

ENGLISH

Connecting Headphones

Connect peripherals to the monitor via the headphones port.

NOTE

• Peripheral devices are sold separately.

• If you use angled earphones, it may cause a problem with connecting another external

device to the monitor. Therefore, it is recommended to use straight earphones.

Angled Straight

(Recommend)

• Depending on the audio settings of the PC and external device, headphones and

speaker functions may be limited.

18

ENGLISH

USER SETTINGS

Activating the Main Menu

1 Press the joystick button on the bottom of the

monitor.

2 Move the joystick up/down ( / ) and left/right

( / ) to set the options.

3 Press the joystick button once more to exit the

main menu.

Joystick Button

Button Menu Status Description

Main menu disabled Enables the main menu.

Main menu enabled

Exits the main menu.

(Holding down the button to turn off the monitor. You can

turn off the monitor this way at any time, including when the

OSD is on.)

Main menu disabled Adjusts the monitor volume level.

Main menu enabled Enters the Input features.

Main menu disabled Adjusts the monitor volume level.

Main menu enabled Enters the Settings feature.

Main menu disabled Displays the information on the current input.

Main menu enabled Turns off the monitor.

Main menu disabled Displays the information on the current input.

Main menu enabled Enters the Game Mode feature.

19

ENGLISH

Main Menu Features

Main Menu Description

Input Sets input mode.

Power Off Turns off the monitor.

Settings Configures the screen settings.

Game Mode Sets the game mode for gaming.

Exit Exits the main menu.

Power Off

Input Settings

Game Mode

Exit

20

ENGLISH

User Settings

Menu Settings

1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Settings.

2 Configure the options by moving the joystick up/down/left/right.

3 To return to the upper menu or set other menu items, move the joystick to or pressing ( ) it.

4 If you want to exit the OSD menu, move the joystick to until you exit.

Game Mode Game Adjust Picture Adjust Input General

Page is loading ...

LG 34GL750-B Owner's manual

Related papers

Other documents