Philips GC1022/70 Datasheet

Category
Irons
Type
Datasheet

Philips GC1022/70 is a steam iron with a non-stick soleplate, designed to make ironing faster and easier. It features a powerful 2000W motor for consistent high steam output, a steam boost of up to 90g for stubborn creases, and continuous steam of up to 25g/min for efficient crease removal. The triple precision tip allows for precise ironing in tricky areas, while the even steam distribution ensures consistent results. With a 200ml water tank, the iron can be used for extended periods without the need for refilling.

Philips GC1022/70 is a steam iron with a non-stick soleplate, designed to make ironing faster and easier. It features a powerful 2000W motor for consistent high steam output, a steam boost of up to 90g for stubborn creases, and continuous steam of up to 25g/min for efficient crease removal. The triple precision tip allows for precise ironing in tricky areas, while the even steam distribution ensures consistent results. With a 200ml water tank, the iron can be used for extended periods without the need for refilling.

Philips EasySpeed
Steam iron with Non-stick
soleplate
25 g/min; 90 g steam boost
Non-stick Iron Soleplate
2000 Iron Watts
GC1022/70
Fast, from start to finish
3 ways to speed up your ironing
This EasySpeed iron speeds up your ironing thanks to: triple precision tip, even heat
distribution across the soleplate and continuous steam.
Easily removes creases
Power up to 2000 W enabling constant high steam output
Steam boost up to 90 g for the most stubborn creases
Continuous steam up to 25 g/m for good crease removal
Non-stick soleplate coating
Longer lifetime
Calc clean slider to easily remove scale out of your iron
Comfortable ironing
Triple precision tip for optimal control and visibility
Even steam distribution for efficient ironing
A fine spray evenly moistens the fabric
GC1022/70
Highlights
Steam iron with Non-stick soleplate
25 g/min; 90 g steam boost Non-stick Iron Soleplate, 2000 Iron Watts
Power up to 2000 W
Power up to 2000 W enables constand high
steam output.
Steam boost up to 90 g
The iron's 90 g steam boost enables you to
easily remove even the most stubborn creases.
Continuous steam up to 25 g/m
Continuous steam up to 25 g/m for good
crease removal.
Non-stick soleplate
The soleplate of your Philips iron is coated
with a special non-stick layer for good gliding
performance on all fabrics.
Calc clean slider
This calc clean slider makes it very easy to
remove scale out of your iron. To maintain the
performance of your Philips steam iron you
should use this scale clean function once a
month.
Triple precision tip
The tip of this Philips iron is precise in 3 ways:
it has a pointed tip, button groove and a sleek
design of the nose. Triple Precision tip enables
you to reach even into the most tricky areas,
e.g. around the buttons or between the pleats.
Even steam distribution
Thanks to the carefully crafted soleplate
des
ign, the steam is distributed evenly across
the soleplate. This way you need less strokes
to evenly moisten the garment and therefore
less time to complete the ironing.
Spray
The spray function produces a fine mist that
evenly moistens the fabric, making it easier to
iron out creases.
Issue date 2013-12-05
Version: 3.0.1
© 2013 Koninklijke Philips N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V.
or their respective owners.
www.philips.com
GC1022/70
Specifications
Steam iron with Non-stick soleplate
25 g/min; 90 g steam boost Non-stick Iron Soleplate, 2000 Iron Watts
Fast & powerful crease removal
Soleplate: Non-stick
Continuous steam output: 25 g/min
Steam boost: 90 g
•Spray
Power: 2000 W
Steam output
Easy to use
Water tank capacity: 200 ml
Reaching tricky areas: Triple precision tip
Calc management
Calc clean solution: Self clean
  • Page 1 1
  • Page 2 2
  • Page 3 3

Philips GC1022/70 Datasheet

Category
Irons
Type
Datasheet

Philips GC1022/70 is a steam iron with a non-stick soleplate, designed to make ironing faster and easier. It features a powerful 2000W motor for consistent high steam output, a steam boost of up to 90g for stubborn creases, and continuous steam of up to 25g/min for efficient crease removal. The triple precision tip allows for precise ironing in tricky areas, while the even steam distribution ensures consistent results. With a 200ml water tank, the iron can be used for extended periods without the need for refilling.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI