Canon S630 Operating instructions
- Category
- POS/mobile printers
- Type
- Operating instructions
Canon S630 is a Color Bubble Jet Printer with capabilities that include:
- High-quality printing: The Canon S630 uses a printhead with 1,440 nozzles to deliver sharp, detailed prints with a resolution of up to 4800 x 1200 dpi.
- Fast printing: The Canon S630 can print up to 22 pages per minute in black and white and 17 pages per minute in color.
- Versatile paper handling: The Canon S630 can accommodate a variety of paper sizes and types, including plain paper, photo paper, and envelopes.
- Wireless connectivity: The Canon S630 can connect to your computer or mobile device wirelessly, making it easy to print from anywhere in your home or office.
Canon S630 is a Color Bubble Jet Printer with capabilities that include:
- High-quality printing: The Canon S630 uses a printhead with 1,440 nozzles to deliver sharp, detailed prints with a resolution of up to 4800 x 1200 dpi.
- Fast printing: The Canon S630 can print up to 22 pages per minute in black and white and 17 pages per minute in color.
- Versatile paper handling: The Canon S630 can accommodate a variety of paper sizes and types, including plain paper, photo paper, and envelopes.
- Wireless connectivity: The Canon S630 can connect to your computer or mobile device wirelessly, making it easy to print from anywhere in your home or office.
Install the Ink Tanks
Unpack the Printer
1
2
3
4
5
Prepare the Printer
Install the Printhead
Color Bubble Jet
™
Printer
Connect the Printer
To Your Computer
Start Here
Easy Setup Instructions
IMPORTANT: Be sure printer is off
before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
Turn the printer off.
Connect one end of the USB cable
to the computer, the other to the printer.
For Parallel Cables:
Turn the printer off.
Connect one end of the parallel cable to
the computer, the other to the printer.
IMPORTANT: Be sure printer is off
before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
Continue with Step 6
on side two.
1
2
1
2
For USB Cables:
Canon USA S630 boxtop.ai
Clarity 22 June 2001
(IEEE 1284 compliant)
Parallel cable
Parallel port
Secure
wire clips
Parallel cable
USB port
USB cable
Protective cap
Pull the orange tab off the yellow ink tank
(BCI-3eY), then remove and discard the
plastic wrapper.
Twist off and discard the orange
protective cap.
NOTE: To avoid spilling ink, never press on
the sides of an ink tank.
Insert the ink tank into the correct slot.
(Refer to the color guide on the printhead.)
Press down gently until the ink tank locks
into place.
Insert the remaining three ink tanks into
their assigned slots.
Close the front cover and attach the
paper rest and output tray.
2
1
3
4
5
Electrical contacts
Slide the printhead into the holder. The
printhead will rest at a slight angle.
Do not press it down.
Remove the printhead from its package.
Turn the printhead over, then remove
the orange protective cap.
NOTE: Do not touch the electrical contacts.
Lower the lock lever and press it down
until it locks firmly into place.
Raise the gray lock lever.
3
4
5
2
1
POWER
lamp
POWER
button
Serial number
Protective tape
Shipping tape
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
Open the front cover. The printhead holder
automatically moves to the center. Remove
the protective tape.
Write down the serial number located to
the right of the printhead. You will need
this later to register the product.
3
4
5
1
Remove the shipping tape from the front
and sides of the printer.
2
USB port
Press the POWER button to turn the
printer ON.
Ink tanks
BCI-3eC Cyan BCI-3eM Magenta
BCI-3eBK Black BCI-3eY Yellow
Power cord
S630 Series
Color Bubble Jet Printer
Documentation
and software kit
S630 BJ (Bubble Jet) Printhead
Paper rest
Output tray
Carefully remove all items from the box.
1
Install the Printer Driver (Macintosh
®
)
6
Align the Printhead
7
Macintosh
Windows
Install the Printer Driver (Windows
®
)
6
2
Before using the printer, align the printhead
to ensure the best quality printing.
3
Load a stack of blank paper in the
paper rest.
Start the alignment procedure.
Windows:
a. Click Start, then Settings, then
Printers.
b. Right-click the Canon S630 icon,
then click Properties.
c. Click the Maintenance tab, then
click the Print Head Alignment icon.
d. When asked to start printhead
alignment, click OK.
e. Follow the on-screen instructions
to complete printhead alignment.
Macintosh:
a. From the File menu in a software
application, click Page Setup.
b. Click the Utilities button.
c. Click the down-arrow to select
Test Print.
d. Click the Print Head Alignment icon.
e. Follow the on-screen instructions
to complete printhead alignment.
Click OK (Windows) or Close (Macintosh)
when finished.
Part no. 0010X610/QA-1729
© 2001 Canon U.S.A., Inc.
Canon, BJ, BCI and Bubble Jet are trademarks of Canon Inc.
All other products and brand names are registered
trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
PRINTED IN U.S.A.
PRINTED IN THAILAND
1
2
3
NOTE: You can now install the BJ Solution
software. Insert the BJ Solution CD-ROM.
The setup program should start automatically.
Follow the on-screen instructions.
After the computer restarts, TURN THE
PRINTER ON. Select the Apple menu,
then Chooser.
Click the S630 icon in the Chooser. The
printer name will highlight and move to
the right panel.
NOTE: To use the BJ Print Monitor, click the
Backgrounding button to the On position.
Close the Chooser.
To ensure highest quality output, continue
with step 7 Align the Printhead.
7
8
9
10
Open the printer driver folder on the CD-ROM,
then double-click the Installer icon.
Read the License Agreement, then click Accept.
Click Install. The printer driver will load
automatically.
If the message "No other applications can
be running..." displays, click Continue.
When the "Installation was successful"
screen displays, Restart your computer.
NOTE: Register your product to ensure product
support. Open the printer driver folder and double-
click the Product Registration icon, then follow
the on-screen instructions.
The serial number is located on the inside of the
printer, to the right of the printhead.
NOTE: Screen shots may differ depending on
the operating system used.
2
3
4
1
5
6
Click Start. (If the Printer Driver button is
not red, select Printer Driver, then click
Start.) The printer driver will start loading
automatically.
6
7
TURN THE PRINTER ON so the printer port
(connection) can be automatically detected.
To ensure highest quality output, continue
with step 7 Align the Printhead.
The software will begin identifying the
printer port being used.
IMPORTANT: If your computer cannot
detect a printer port, refer to the
Troubleshooting chapter in the
S630 Quick Start Guide for instructions.
When the Terminate Installation window
appears, click OK.
If you are prompted to restart the computer,
click Yes. When the installation and
registration process has completed, click Exit.
NOTE: Remember to register your product to
ensure product support. The serial number is
located on the inside of the printer, to the
right of the printhead.
NOTE: You can now install the BJ Solution
software. Insert the BJ Solution CD-ROM.
The setup program should start automatically.
Follow the on-screen instructions.
10
9
8
POWER
lamp off
POWER
button
POWER
lamp on
POWER
button
Be sure the printer is OFF before continuing.
1
NOTE: For Windows 2000 or Windows NT 4.0,
log on to Windows as an Administrator before
continuing.
IMPORTANT: If you see this screen,
click Cancel and continue.
Close any open software applications,
then insert the S630 Setup Software &
User's Guide CD-ROM. The setup program
should run automatically.
Read the Welcome screen, then click Next.
NOTE: If the setup program does not run,
click Start, then Run, then type D:\msetup.exe,
where D is your CD-ROM drive.
3
2
4
5
Read the License Agreement, then
click Yes.
When the main menu appears, click
Install Software.
NOTE: If you are prompted to restart Windows,
remove the CD-ROM, then click OK. After the
computer restarts, insert the CD-ROM and continue.
Insert the S630 Setup Software & User's
Guide CD-ROM.
-
1
-
2
Canon S630 Operating instructions
- Category
- POS/mobile printers
- Type
- Operating instructions
Canon S630 is a Color Bubble Jet Printer with capabilities that include:
- High-quality printing: The Canon S630 uses a printhead with 1,440 nozzles to deliver sharp, detailed prints with a resolution of up to 4800 x 1200 dpi.
- Fast printing: The Canon S630 can print up to 22 pages per minute in black and white and 17 pages per minute in color.
- Versatile paper handling: The Canon S630 can accommodate a variety of paper sizes and types, including plain paper, photo paper, and envelopes.
- Wireless connectivity: The Canon S630 can connect to your computer or mobile device wirelessly, making it easy to print from anywhere in your home or office.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Canon S630 Quick start guide
-
-
-
-
-
-
-
-
-