Teraflex Transfer Case Lowering Kit Installation guide

Brand
Teraflex
Model
Transfer Case Lowering Kit
Type
Installation guide

This manual is also suitable for

Installation Guide for
the TJ Transfer Case
Lowering Kit
1997-2002 TJ Wrangler
Applications
2003-Current TJ Wrangler
Applications
1" Spacer
Beveled washer
Lock washer
1/2"x3" bolt
1" Spacer
Lock washer
Flat washer
12mmx70mm bolt
Transfer Case Skid Plate
1. 1997-2002 TJ Wranglers- Install the six spacers (1.25”OD x 1.25” tall)
between the frame and the cross member with the at end of the
spacer up against the frame. The 1/2” lock washer goes onto the 1/2”
x 3” bolt rst followed by the tapered washer with the at end of the
tapered washer against the lockwasher.
2. Put the tires and wheels back on if needed and lower the TJ to the
ground.
1. 2003-current TJ Wranglers- Install the six spacers (1.25”OD x 1.25”
tall) between the frame and the cross member with the at end of the
spacer up against the frame. The 1/2” lock washer goes onto the M12
x 1.75 x 70 bolt rst followed by the 1/2” at washer.
2. Put the tires and wheels back on if needed and lower the TJ to the
ground.
Tera Manufacturing, Inc.•5251 South Commerce Dr.•Murray, UT 84107•Phone/801.288.2585•Fax/801.713.2313•www.teraex.biz
INSTALLATION GUIDE
Part #001900100 (TJ 97-02, Skin Packed)
Part #001900190 (TJ 97-02, Boxed)
Part #001900103 (TJ 03-06, Skin Packed)
Part #001900193 (TJ 03-06, Boxed)
  • Page 1 1

Teraflex Transfer Case Lowering Kit Installation guide

Brand
Teraflex
Model
Transfer Case Lowering Kit
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents