User Manual
Copper Salt and Pepper Grinder Set by JCPKitchen
Thank you for your purchase!
In this user manual, we will share some tips and tricks on how to operate your new Copper Salt
and Pepper Grinder Set. In case we missed something or you have an additional question, do not
hesitate to contact us!
First, let’s start with an important message: the parts in the grinders that are actually grinding the
spices are made of high quality ceramic material (the white parts inside the grinder). This is
extremely durable material but very sensitive to moisture. Therefore, please do not immerse these
parts in water.
If you want to clean these parts, we recommend cleaning them with a small brush.
In the case you accidently did wash these parts with water, we advise you to let it dry completely
(this can take some time) before usage.
Other general cleaning guidelines:
- We do not recommend putting the grinders or any parts of it in the dishwasher
- The glass bottle can be washed with soap or a damp cloth (recommended). Let it dry completely
before reusing the grinders.
- Clean the body of the mills with a soft, dry cloth. Never immerse the mill in water. Clean the insides
of the mill with a small brush.
Assembly
It might happen that if you are trying to adjust the size of the ground spices, the spring-loaded
ceramic portion comes apart. This happens when you completely unscrew the knob.
Here we will cover how to re-assemble all the parts in a correct way:
- First, put back the spring. The smallest side goes first. So the widest part is on top
- Then you put the white ceramic grinder part on top of the spring, with the widest side on top
- After that, you screw the knob on the thread