JimiloT VL502 User manual

Brand: JimiloT

Model: VL502

Type: User manual

JimiloT VL502 is a 4G LTE GPS tracker designed for vehicles, offering real-time location tracking and a variety of safety features. With accurate positioning systems, it provides precise location data on cloud platforms. By connecting to your vehicle's OBDII port, it can obtain real-time data such as mileage, fuel consumption, and engine speed. The device also detects dangerous driving behaviors and sends alerts for events like harsh acceleration, braking, or cornering, and collisions.

VL502

LTE OBDII GNSS TRACKER

User Manual V1.0

The product speci󼴩cations and information in this document are for reference

only and no prior notice will be given if any change is made. Unless otherwise

stated, the content of this document is not a guarantee in any form.

CONTENTS









1.1 Appearance -------------------------------------------------01

1.2 Pinout -----------------------------------------------------01

1.3 Status LED Indication ------------------------------------ 02



2.1 SIM Card Attachment -------------------------------------03

2.2 Installing the Device --------------------------------------04



6.1 Special Note ------------------------------------------------10

6.2 Warranty Terms --------------------------------------------10

6.3 Note ----- -----------------------------------------------------11

󼴩

3.1 Con󼴩guring APN and Server Parametes -------------04

3.2 Default con󼴩guration settings ------------------------- 05



4.1 Features -----------------------------------------------------06

4.2 Basic characteristics --------------------------------------06

Overview





Pin Number Pin Name description

4 GND(-) Ground

5 GND(-) Ground

6 CAN_H CAN high

7 K-Line

14 CAN_L CAN low

15 L-Line

16 VCC(9-36)V DC(+) Power supply(9-36V DC)

Making connections simpler



Fast blink [0.1s-0.1s(on-o󼴨)] The battery is low.

Slow blink [2s-2s(on-o󼴨)] The device is charging.

Solid on The charging is complete.

Slow blink [0.1s-2s(on-o󼴨)] The device operates correctly.

O󼴨 The battery is under voltage or

encounters an internal failure.



Fast blink [0.3s-0.3s(on-o󼴨)] The device is searching for

satellite signals.

Solid on The GNSS module is already

󼴩xed a position.

O󼴨 Device is in sleep mode or not

operating.



Fast blink [0.3s-0.3s(on-o󼴨)] The GMS is initializing.

Solid on The device is in a call/online.

O󼴨 Network error or no SIM card.



Installation



・Step 1 Prepare a Nano-SIM.

・ Step 2 Attach the SIM.

Place the Nano-SIM card on the SIM card tray and insert it into the

SIM card slot.

Tips:

・After the SIM is in inserted, the device powers on using the backup

battery. If the device fails to power due to low battery, you can connect

the device to the OBDIl connector of the vehicle to obtain power.

・The SIM card must be inserted correctly, If the SIM is identified and

requires a PIN, please disable the PIN request.

Making connections simpler



・Connecting the device to the vehicle:

Find OBDII Connector in your vehicle (the following 󼴩gure shows most

of common OBD II connector locations).

Quick SMS con󼴩guration

󼴩

To ensure the device gets online and operates correctly, you are advised to

check the APN and server settings. You can set the APN and the server via

SMS commands if necessarily.

・APN settings

It is recommended to contact your network operator to con󼴩rm the

APN information. Then you can use your phone to deliver the following

SMS command to the VL502:

APN, apnname#

For example: APN, internet#

󼴩

Or if your local APN contains a user name and password, you can use

the following command to set the APN:

APN, apnname, user, password#

For example: APN, internet, CLENTE, AMENA#

・Server settings

It is recommended to contact your platform service provide to con󼴩rm

the domain name and IP address of their serve. Then you can use your

phone to deliver the following command to the VL502:

SERVER, mode, domain name/IP, port, protocol#

For example:

SERVER,1, www. ydpat. com,8011,0#

SERVER,0,211.154.135.113,8011,0#

"Mode=1"means to set the server parameters via the domain name;

"Mode=0"means to set the server parameters via the IP address.

"Protocol=0"means to connect to the server using TCP protocol.

・Movement and ignition detection:

Vehicle movement will be detected by accelerometer.

Ignition will be detected by vehicle power voltage between 9-36 V.

・Device will send a alert noti󼴩cation to the server if one of these events

happen:

Vehicle keeps moving at speeds above the threshold for a preset duration.

Driver steps on the brake or gas pedal hard, corners rapidly.

The device is plugged or unplugged from the OBDII connector.

Making connections simpler

Introduction





・Communication via 4G LTE networks. Two complementary positioning

systems ensure the locations to be accurately displayed on cloud platform.

・Obtains real data of vehicle (accurate mileage, fault code, ACC status,

fuel consumption statistics, battery voltage, engine speed, etc.)

・Two complementary positioning systems ensure the locations to be

accurately displayed on cloud platform

・Get instant alerts for 4 kinds of dangerous driving behavior, depending on

your needs.

・Instant alerts for atypical events such as car fault, collision, overspeed,

device pull-out, engine idling, low battery, geo-fence entry/exit, etc.

・Through bluetooth connection you can con󼴩gure parameters, upgrade

software, and debug.

・Ensures constant tracking in the area with poor GPS signal or even without

it.

・Simply plug this device into OBD Il socket, you don't have to turn to

professionals.

Positioning system GPS/BDS

Frequency L1

Positioning accuracy <2.5m CEP

Track sensitivity -162 dBm

Acquisition sensitivity -148 dBm (cold) /-156 dBM (hot)

TTFF (open sky) Avg. hot start <1sec

Avg. cold start ≤ 32sec



Communication network LTE Cat M1&NB

Frequency Cat M1： B2/ B4/B5 /B12/B13

Cat NB2: B2 /B4/B5/B12/B13



Battery 160mA/3.7V

Input voltage 9-36VDC



Data K-Line, CAN Bus Data

Data Reading

Allow information to be read from OBDII

port upports OBD protocols:

ISO 9141-2 (5 baud init, 10.4 kbaud)

ISO 14230-4 KWP (5 baud init, 10.4 kbaud)

ISO 14230-4 KWP (fast init, 10.4 kbaud)

ISO 15765-4 CAN (11 bit ID, 250 kbaud)

ISO 15765-4 CAN (11 bit ID, 500 kbaud)

ISO 15765-4 CAN (29 bit ID, 250 kbaud)

ISO 15765-4 CAN (29 bit ID, 500 kbaud)

SAE J1939 CAN (29 bit ID, 250 kbaud)

SAE J1939 CAN (29 bit ID, 500 kbaud)



Connection OBD II socket

GNSS antenna Internal High Gain

USB 2.0 Micro-USB

LED indication 3 status LED lights

SIM Nano-SIM

Data storage 4+4MB



Making connections simpler

Dimensions 65(L)*50(W)*25(H) mm

Weight 65 g

󼴩

Operating temperature -20 ℃ to 70 ℃

Operating humidity 5%~95%, non-condensing



Sensors Accelerometer

BLE Support BLE 4.0 protocol

Ignition detection External Power Voltage,

Accelerometer Engine RPM

Scenarios

Vehicle movement alert, Over-

speed alert Geo-fence, Vehicle

battery detection, Power supply

disconnection

Driving behavior analysis Harsh acceleration, Harsh braking

Harsh cornering, Collision

SMS Con󼴩guration, Events, Debug

Fuel monitoring OBD II



Precautions About Battery

Please use batteries that are speci󼴩ed by the manufacturer of the device.

The manufacturer will assume no repair liabilities for damages resulting

from the use of non-original accessories.

・Avoid metal objects as they may cause short circuits on battery contacts.

・Do not bend or forcibly open the battery.

・Do not soak the battery in water or expose it to 󼴩re.

・It is forbidden to use batteries that are deformed, discolored, spilled, or

package-damaged.

・It is forbidden to disassemble or modify the battery.

Making connections simpler

Warranty Instructions and Servic



・No prior notice will be given if the product is upgraded due to

technological reasons.

・The appearance or color of the product is subject to the actual.

・The warranty card applies to the services of repair, replacement and

refund of the product with the following IMEI.

・Please keep this warranty card and the original purchase receipt

together in a safe place, as these will be needed at time of services.



・For damages not caused by human factors, this warranty lasts for one

year starting from the date of purchase.

・You can choose to pay for the repair services in any of the following

cases:

① The warranty card expires;

② No warranty card or valid proof of purchase;

③ The product, including its accessories, is not in the warranty

period;

④ Quality issues resulted from unauthorized repair, crash, liquid

spillage, accident, modi󼴩cation, or incorrect voltage input; or the

label, IMEI, or counterfeit mark of the device is broken or scribbled;

⑤ Damage caused by installing or using the device without

following the instructions in this User Manual;

⑥ The warranty does not cover damages resulted from soaking in

liquid;

⑦ The product model is inconsistent with that on the warranty card

or the warranty card was altered;

⑧ Damage caused by force majeure such as 󼴩re, 󼴪ood, or lightning.



・For vehicle trackers

As of January 1, 2016, the warranty lasts for 1 (one) year from the date

of purchase.

・The speci󼴩c terms are

1. A full replacement, including accessories, if the product is found

defective during the unpacking check (that is, the device has neither

been installed nor used);

2. If a defect occurs within one year after installation, then:

a󼴨ect normal use; or

② @Replace the housing and the mainboard if the housing is

defective and a󼴨ects normal use (Please be noted that man-made

damages will void the replacement service for the housing).

3. Free repair services will be given to the product if a defect is found

during the 󼴩rst year under proper use.

Making connections simpler

Troubleshooting

When an issue arises with the device, you can troubleshoot it by the

following solution. If the issue persists, please don't hesitate to contact

your dealer or service provider.

Common Issues Possible Causes Solutions

Poor signal

The device is used in an area

where radio waves cannot

reach, such as near high-rise

buildings or in a basement.

Try it in a place where

satellite signals can

be well received.

Power-on failure

No SIM Insert a SIM.

The battery is exhausted. Charge the device.

Failed to access

the network

The SIM card may be attached

improperly. Check the SIM.

The metal side of the SIM card

is stained.

Clean it with an

eraser.

The SIM card is invalid.

Please contact your

network service

provider.

The device is out of cellular

service areas. Try it in a service area.

The signal is extremely weak. Try it in an area with

strong signals.

Failed to query a

location

The device keeps replying

with "No data found, please

try again".

Please contact your

dealer.

Customer Information

󼴩



Customer Name IMEI No.

Mailing Address

Product Model Phone

Date of Purchase Invoice No.

Purchased From

Address

Phone

Maintenance Record

Important

Please keep this warranty card in a safe place, as it is the proof for one-year

free warranty services. If this card is lost, the Company will determine the

date of purchase to be the thirtieth (30th) day after the date of production.

Service

Start Date

Problem and

Solution

Service End

Date

Customer

Signature

Warranty Card

Making connections simpler

JimiloT VL502 User manual

JimiloT VL502 User manual

Other documents