Pepperl+Fuchs OHV210-F229-B15 Owner's manual

OHV210-F229-B15

Handheld reader

Manual

With regard to the supply of products, the current issue of the following document is applicable:

The General Terms of Delivery for Products and Services of the Electrical Industry, published

by the Central Association of the Electrical Industry (Zentralverband Elektrotechnik und Elek-

troindustrie (ZVEI) e.V.) in its most recent version as well as the supplementary clause:

"Expanded reservation of proprietorship"

Worldwide

Pepperl+Fuchs Group

Lilienthalstr. 200

68307 Mannheim

Germany

Phone: +49 621 776 - 0

E-mail: [email protected]

North American Headquarters

Pepperl+Fuchs Inc.

1600 Enterprise Parkway

Twinsburg, Ohio 44087

USA

Phone: +1 330 425-3555

E-mail: [email protected]

Asia Headquarters

Pepperl+Fuchs Pte. Ltd.

P+F Building

18 Ayer Rajah Crescent

Singapore 139942

Phone: +65 6779-9091

E-mail: [email protected]rl-fuchs.com

https://www.pepperl-fuchs.com

OHV210-F229-B15

Contents

2022-10

3

1 Introduction................................................................................................................ 5

1.1 Content of this Document............................................................................. 5

1.2 Target Group, Personnel ............................................................................... 5

1.3 Symbols Used ................................................................................................ 5

2 Product Description .................................................................................................. 7

2.1 Use and Application ...................................................................................... 7

2.2 Indicators and Operating Elements ............................................................. 8

2.3 Scope of Delivery......................................................................................... 10

2.4 Accessories.................................................................................................. 10

2.5 Storage and Disposal.................................................................................. 10

3 Installation................................................................................................................ 11

3.1 Inserting and Removing the Battery.......................................................... 11

3.2 Charging Cradle Connection ...................................................................... 12

3.3 Charging the Handheld Reader.................................................................. 14

3.4 Connection via Bluetooth®......................................................................... 15

3.5 Connection to a Host................................................................................... 16

3.6 Locking Device Connections...................................................................... 17

4 Configuration ........................................................................................................... 18

4.1 Selecting the Operating Mode.................................................................... 18

4.1.1 Keyboard Mode ................................................................................................................ 18

4.1.2 Vision Configurator Mode ................................................................................................. 18

4.1.3 Bidirectional Communication ............................................................................................ 19

4.1.4 Keyboard Layout............................................................................................................... 21

4.2 Using Vision Configurator........................................................................... 21

4.2.1 Connecting to Vision Configurator .................................................................................... 21

4.2.2 Layout of Application Window........................................................................................... 23

4.2.3 Sensor Data...................................................................................................................... 24

4.2.4 Test Statistics.................................................................................................................... 24

4.2.5 Firmware Update .............................................................................................................. 25

4.2.6 Read Result...................................................................................................................... 26

4.2.7 Edited Parameters ............................................................................................................ 27

4.2.8 Script ................................................................................................................................ 28

4.3 Configuration Using Control Codes........................................................... 32

4.3.1 Data Matrix control codes ................................................................................................. 32

5 Operation.................................................................................................................. 55

5.1 Switching On the Handheld Reader........................................................... 55

OHV210-F229-B15

Contents

2022-10

4

5.2 Reading Codes.............................................................................................55

5.3 Orientation....................................................................................................56

5.4 Operation of the Charging Cradle ..............................................................57

5.5 Using the Battery .........................................................................................59

5.6 Locating the Handheld Reader...................................................................60

5.7 Operating Modes..........................................................................................60

5.8 Notifications .................................................................................................61

6 Servicing...................................................................................................................63

7 Troubleshooting .......................................................................................................64

OHV210-F229-B15

Introduction

2022-10

5

1 Introduction

1.1 Content of this Document

This document contains information required to use the product in the relevant phases of the

product life cycle. This may include information on the following:

•Product identification

•Delivery, transport, and storage

•Mounting and installation

•Commissioning and operation

•Maintenance and repair

•Troubleshooting

•Dismounting

•Disposal

The documentation comprises the following parts:

•This document

•Datasheet

In addition, the documentation may comprise the following parts, if applicable:

•EU-type examination certificate

•EU declaration of conformity

•Attestation of conformity

•Certificates

•Control drawings

•Instruction manual

•Functional safety manual

•Other documents

1.2 Target Group, Personnel

Responsibility for planning, assembly, commissioning, operation, maintenance, and dismount-

ing lies with the plant operator.

Only appropriately trained and qualified personnel may carry out mounting, installation, com-

missioning, operation, maintenance, and dismounting of the product. The personnel must have

read and understood the instruction manual and the further documentation.

Prior to using the product make yourself familiar with it. Read the document carefully.

1.3 Symbols Used

This document contains symbols for the identification of warning messages and of informative

messages.

Note

For full information on the product, refer to the further documentation on the Internet at

www.pepperl-fuchs.com.

Note

For specific device information such as the year of construction, scan the QR code

on the device. As an alternative, enter the serial number in the serial number search

at www.pepperl-fuchs.com.

2022-10

6

OHV210-F229-B15

Introduction

Warning Messages

You will find warning messages, whenever dangers may arise from your actions. It is mandatory

that you observe these warning messages for your personal safety and in order to avoid prop-

erty damage.

Depending on the risk level, the warning messages are displayed in descending order as fol-

lows:

Informative Symbols

Action

1.

This symbol indicates a paragraph with instructions. You are prompted to perform an action or

a sequence of actions.

Danger!

This symbol indicates an imminent danger.

Non-observance will result in personal injury or death.

Warning!

This symbol indicates a possible fault or danger.

Non-observance may cause personal injury or serious property damage.

Caution!

This symbol indicates a possible fault.

Non-observance could interrupt the device and any connected systems and plants, or result in

their complete failure.

Note

This symbol brings important information to your attention.

OHV210-F229-B15

Product Description

2022-10

7

2 Product Description

2.1 Use and Application

The handheld is a compact handheld reader for all common 1-D and 2-D codes. Special tech-

nology to prevent glare allows the device to read codes accurately on highly reflective surfaces.

With its patented dual lens and a resolution of 1.2 million pixels, it can read both small and large

codes from a wide range of distances. A different-colored target projection makes it easier to

see the relevant code. The device responds via a vibration or a visual or audio signal.

The Vision Configurator software can be used to create rule sets for formatting read results

without extensive programming work. This enables easy integration into ERP systems. The

read data is transferred via the Bluetooth interface or by plugging the handheld reader into the

charging cradle. With its rugged housing and degree of protection (IP65), the handheld reader

is suitable for outdoor use.

Figure 2.1 Handheld reader

The device is only approved for appropriate and intended use. Ignoring these instructions will

void any warranty and absolve the manufacturer from any liability.

Use the device only within the specified ambient and operating conditions.

Protection of the personnel and the plant is not ensured if the device is not used according to its

intended use.

Caution!

Irritation caused by optical radiation

The optical unit on the handheld reader is equipped with very bright LEDs that can cause irrita-

tion in dark environments.

Do not point the handheld reader at people.

Do not look directly into the optical unit on the handheld reader.

2022-10

8

OHV210-F229-B15

Product Description

2.2 Indicators and Operating Elements

Handheld reader

1Optical unit

2Data LED

3Wireless LED

4Trigger button 1

5Trigger button 2

6Battery release

7Battery status button

8Battery status indicator

9Trigger button 3

1

2

3

4

5

9

6

78

OHV210-F229-B15

Product Description

2022-10

9

Charging cradle

Table mount

The table mount provides additional stability to the charging cradle when it is freestanding on a

counter or table.

1Quick connection code

2Wireless LED

3Page button

4Micro USB interface

5Threaded mounting inserts (M3 x 0.5)

6Cable guide groove

1Cable output

2Rubber feet

3Cable entry guides

4Cable output

2

4

5

6

1

3

1

2

3

4

2022-10

10

OHV210-F229-B15

Product Description

Lithium-ion battery

2.3 Scope of Delivery

Check the packaging and contents for damage.

Check if you have received every item and if the items received are the ones you ordered.

•Handheld reader

OHV210-F229-B15

•Lithium ion battery, 1200 mAh

OHV210-BAT

•Charging cradle

OHV210-CHARGER-B15

2.4 Accessories

2.5 Storage and Disposal

Keep the original packaging. Always store and transport the device in the original packaging.

Store the device in a clean and dry environment. The permitted ambient conditions must be

considered, see datasheet.

The device, built-in components, packaging, and any batteries contained within must be dis-

posed in compliance with the applicable laws and guidelines of the respective country.

1Battery status button

2Battery Status Indicator

1

2

Designation Description

OHV210-CHARGER-B15 Charging cradle for OHV200 handheld readers with integrated

Bluetooth modem

incl. connection cable USB-G-1M-PVC-ABG-USBB-G

The connection cable can also be ordered separately at a later

point.

OHV-BAT Lithium ion battery, 1200 mAh

Vision Configurator Configuration software for camera-based sensors

When using OHV handheld readers, you can download the soft-

ware free of charge from www.pepperl-fuchs.com.

OHV210-F229-B15

Installation

2022-10

11

3 Installation

3.1 Inserting and Removing the Battery

Inserting the Battery

The battery is shaped so that it can only be inserted in one direction.

1.

Insert the battery into the cavity of the handheld reader until it clicks into place.

2.

Press any key on the handheld reader (except the battery status key on the battery) for half a

second.

The handheld reader begins the start sequence. When the handheld reader has success-

fully completed its start sequence (approximately 2 seconds), it emits a beep, the LEDs

flash, and the handheld reader vibrates once.

Removing the Battery

1.

Move the locking device on the bottom of the handheld reader in the direction of the arrow until

the battery easily springs out.

1

2

2022-10

12

OHV210-F229-B15

Installation

2.

Pull the battery out of the handheld reader.

3.2 Charging Cradle Connection

Connecting the Charging Cradle

1.

Insert the micro USB plug of the cable into the micro USB connection on the bottom of the

charging cradle.

2.

Route the cable along the cable guide groove on the bottom of the charging cradle.

3.

Insert the USB plug on the connection cable into a free USB port on the PC. This step can be

carried out even during operation.

4.

Place the charging cradle in the table mount. The charging cradle can be attached to the table

mount using the two flat head screws supplied.

Note

When the charging cradle is placed in a table mount, the cable should come

through the hole on the back of the charging cradle.

OHV210-F229-B15

Installation

2022-10

13

2022-10

14

OHV210-F229-B15

Installation

3.3 Charging the Handheld Reader

Charging the Handheld Reader

1.

To charge the battery installed in the handheld reader, place the handheld reader in the

charging cradle, with the scanning window facing down.

The handheld reader emits a beep when it is turned off and activated. The handheld reader

emits an additional beep when it is coupled with the charging cradle and reconnects.

The battery status indicator starts flashing alternately for four secondsand lights up for one

second. When the battery is fully charged , the battery status indicator lights up continu-

ously.

Note

Charging Duration

The battery will be fully charged in approximately 3.5 hours when the charging

cradle is used with an external power supply. Charging time may vary when the

inductive charging cradle is connected to a PC USB connection.

Tip

Before First Use

It is recommendedthat the battery is fully charged before using the handheld reader for the first

time, even if a new battery has remaining capacitance.

To ensure sufficient battery power for the duration of a shift, always place the handheld reader

back in the charging cradle between activities.

OHV210-F229-B15

Installation

2022-10

15

3.4 Connection via Bluetooth®

The charging cradle connects to a host via a USB cable. It automatically detects the USB hosts

and connects as an HID keyboard device by default. To change to a different interface type,

scan the desired interface configuration code.

The handheld reader can be coupled with the inductive Bluetooth® charging cradle. The

charging cradle receives data wirelessly from the coupled handheld reader and sends it via

USB to the host computer. It can receive commands, configurations, files, etc., from the host

computer, and send them wirelessly to the coupled handheld reader.

Establishing a Bluetooth® Connection

1.

To couple the handheld reader with the Bluetooth® charging cradle, scan the quick connect

code on the front of the cradle.

A successful coupling is indicated by the handheld reader emitting two short beeps followed

by another beep and then vibrating. In addition, the radio indicators on both the handheld

reader and the charging cradle permanently light up green. The read data is transferred

directly to the connected PC and to the currently opened program. The handheld reader

behaves like a keyboard.

Bluetooth Wireless Performance

The handheld reader uses Class 2 Bluetooth wireless. The output power in the handheld

reader is set to 0 dBm by default , but can be configured to lower or higher maximum values.

The default output power of the Bluetooth wireless on the handheld reader is -8 dBm and can

also be adjusted. A reduction in wireless output limits the detection range of the data transfer.

Automatic Bluetooth Reconnection

The handheld reader attempts to reconnect automatically if the connection is lost (e.g., if the

handheld reader is outside the detection range, if battery power is reduced, if the device is

restarted, or if the charging cradle or host is turned off). This automatic reconnection function is

enabled by default and can be deactivated as needed. The automatic reconnection timeout is

five minutes by default but can be configured for other periods.

Bluetooth Security

Bluetooth low-energy communication in the handheld reader is AES-128 encrypted as stan-

dard. Please contact Pepperl+Fuchs Support for additional security requirements.

Tip

Battery Status Indicator

To check the battery charge status, press the battery status button on the back of the battery,

see chapter 5.5.

2022-10

16

OHV210-F229-B15

Installation

3.5 Connection to a Host

The handheld reader can be coupled as a Bluetooth HID keyboard device with a third-party

host such as a cell phone, tablet, and PC that supports BLE (Bluetooth Low Energy).

Establishing a Host Connection

1.

Scan the following control codes CC0066002_01 and finally M20381_01 to put the handheld

reader into Bluetooth HID keyboard mode.

Figure 3.1 CC0066002_01

Figure 3.2 M20381_01

2.

Open the Bluetooth settings menu on the mobile device or device manager on the PC, find

"OHV210" under the available Bluetooth devices, and connect.

When the handheld reader is successfully connected, it emits a beep and the BT indicator

on the handheld reader flashes.

OHV210-F229-B15

Installation

2022-10

17

3.6 Locking Device Connections

The handheld reader can lock the connection between a read device and charging cradle.

After the connection has been locked, the charging cradle can only connect to the coupled

read device.

Locking Device Connections

1.

After you have coupled the handheld reader with the charging cradle,

scan the M20409_01 barcode to lock the connection

and scan the M20410_01 barcode to unlock the connection.

Figure 3.3 M20409_01 and M20410_01

2022-10

18

OHV210-F229-B15

Configuration

4 Configuration

There are two different ways to configure the handheld reader.

•Control Codes: Control codes allow direct configuration without using a PC. To change a

parameter, scan the appropriate control code using the handheld reader. See chapter 4.3.

•Vision Configurator: The software allows you to perform advanced configuration on a

PC using a clearly arranged user interface. Standard functions include modifying the out-

put string, editing the read result, and assigning a prefix or suffix to the read result, gener-

ating user-defined control codes, and performing a firmware update. See chapter 4.2.

4.1 Selecting the Operating Mode

The handheld reader has three different operating modes.

4.1.1 Keyboard Mode

The handheld reader can be used automatically in keyboard mode. No additional control code

is required. To couple with the charging cradle , all that is required is for the quick connect

code on the front of the charging cradle to be read (see chapter 3.4).

4.1.2 Vision Configurator Mode

Vision Configurator is a configuration software for camera-based sensors. The software allows

you to perform advanced configuration of the sensor using a clearly arranged user interface.

Standard tasks include parameterizing the handheld reader, saving data sets, and transferring

and displaying data and error diagnostics.

To install Vision Configurator, you must activate Vision Configurator mode see chapter 4.2.1.

Mode Description

Keyboard Mode In keyboard mode, the handheld reader acts like a keyboard; see

chapter 4.1.1. The read codes are transferred to the PC as a combina-

tion of letters and digits.

Vision Configurator

Mode

In Vision Configurator mode, the charging cradle is connected to a PC

and connects to the Vision Configurator. This mode is used exclusively

for communication with Vision Configurator, see chapter 4.1.2.

Virtual COM Port The handheld reader operates as an RS-232 serial device via an emu-

lator, see chapter 4.1.3.

Note

Data is transferred using a US English keyboard layout by default.

If data is not transferred correctly in keyboard mode, modify the keyboard layout.

Note

As an alternative to configuration using Vision Configurator, you can configure the handheld

reader using control codes (see chapter 4.3.1).

Note

Switch to Keyboard Mode

To switch back to keyboard mode, first close Vision Configurator. Then scan the quick connect

code on the front of the charging cradle.

OHV210-F229-B15

Configuration

2022-10

19

4.1.3 Bidirectional Communication

To enable bidirectional communication, virtual COM mode must be activated. To do so, pro-

ceed as follows:

Activating Virtual COM Mode

1.

Scan the following control code "USB Vcom" to activate the virtual USB COM port.

2.

Scan the following control code "M20326_01" to activate the text commands.

3.

Alternatively, the text command can be activated via the command ++++FWCMSOR1<CR> and

sent to the handheld reader via a monitor program.

2022-10

20

OHV210-F229-B15

Configuration

In virtual COM mode, the handheld reader operates like an RS-232 series device.

Disabling Virtual COM Mode and Switching to USB Keyboard Mode

1.

Scan the following control code "USB Keyboard" to enter Keyboard mode.

2.

Scan the following control code "M20325_01" to deactivate the text commands.

3.

If you have activated the text command via a monitor program, you can deactivate it using the

command ++++FWCMSOR0<CR>.

Example

Sending Text Commands

The Hercules program from HW group is one example of a monitor program

that can be used. In virtual COM mode, you can send the commands for beep

and trigger to the handheld reader, for example.

The following figure shows the two commands "Beep" and "Trigger:"

Figure 4.1 Example of beep and trigger commands

•Beep: RDCMXEV4P14<CR>

•Trigger: RDCMXEV1,P11.P20,P3500<CR>

Page is loading ...

Pepperl+Fuchs OHV210-F229-B15 Owner's manual

This manual is also suitable for

Pepperl+Fuchs OHV210-F229-B15 Owner's manual

Related papers

Other documents