Orava TF-200 User manual

Category
Kitchen & houseware accessories
Type
User manual

Orava TF-200 is an excellent choice for cooling or heating food and beverages. TF-200 is designed to make your life easier and more enjoyable. It is suitable for home and similar indoor use without special focus, such as in shops, offices, economic buildings, hotels, motels, and bed and breakfast establishments.

The device has an ambient temperature range of +5 to +40 °C, a humidity range of 5 to 85%, and an altitude limit of 2,000 meters. It also has a protection degree of IP20, which means it is protected from touching dangerous parts by hand and is non-waterproof.

To ensure the safety and correctness of the electrical installation, it is recommended to consult a qualified electrician. Only use the power cord with a plug (mains lead) supplied with the device and compatible with a wall socket. Always connect an electrical appliance to an easily accessible mains socket.

Orava TF-200 is an excellent choice for cooling or heating food and beverages. TF-200 is designed to make your life easier and more enjoyable. It is suitable for home and similar indoor use without special focus, such as in shops, offices, economic buildings, hotels, motels, and bed and breakfast establishments.

The device has an ambient temperature range of +5 to +40 °C, a humidity range of 5 to 85%, and an altitude limit of 2,000 meters. It also has a protection degree of IP20, which means it is protected from touching dangerous parts by hand and is non-waterproof.

To ensure the safety and correctness of the electrical installation, it is recommended to consult a qualified electrician. Only use the power cord with a plug (mains lead) supplied with the device and compatible with a wall socket. Always connect an electrical appliance to an easily accessible mains socket.

Portable fridge
TF-200
TF-200
Instruction manual EN
2EN
Intended use of the device
The device is intended exclusively for cooling or heating food and beverages,
to the extent specified in the technical and operating parameters and functions,
safety and user instructions and external influences of the operating environ-
ment.
ORAVA electrical appliances are manufactured according to current knowledge
state of the art and recognized safety regulations. However, improper and
unprofessional use or use in there is a risk of injury or endangerment of the life
of the user or a third party, damage to equipment and other property.
1. GENERAL SAFETY INSTRUCTIONS AND WARNINGS
This document contains important safety instructions and warnings for safe,
correct and economical operation of the electrical equipment. Its compliance
helps the user avoid risks, increase reliability and product life.
In this document, the general term product is used in text parts such as:
electrical equipment - any device used for the production, conversion,
transmission, distribution or use of electricity.
From the point of view of the purpose of using electricity, the concept of
electrical equipment in the strict sense of the word will include the following
categories:
- household electric appliances,
- information and communication equipment,
- consumer electronics,
- lighting equipment,
- electrical and electronic tools,
- toys and equipment for sporting and recreational purposes,
- medical devices (aids),
- monitoring and control devices,
- vending machines.
1.1 General safety instructions
Before operating the unit, we recommend that you carefully read the instruction
manual and operate the equipment in accordance with the instructions!
The safety instructions and warnings in this manual do not cover all the
possible conditions and situations that may arise when using the device. The
user must understand that a factor that cannot be incorporated into any of the
products is personal responsibility and caution. These factors must therefore
be ensured by users serving this device.
Failure to follow the safety instructions and warnings is forbidden by the
manufacturer for any damage to health or property!
Keep the instruction manual as close to the device as possible throughout its
service life. Always keep the instruction manual together with the appliance for
future use and use by new users.
Use the appliance only for the intended purpose and in the manner specified
by the manufacturer.
The appliance is intended for home and similar indoor use without special
focus.
3EN
This appliance is intended, in addition to domestic use, for the following uses:
- in shops, offices and other similar work environments;
- in economic buildings;
- in hotels, motels and other residential environments;
- in bed and breakfast establishments.
It is not a professional device for commercial use.
Do not change the technical parameters and features of the device by
unauthorized modification or modification of any part of the device.
The manufacturer is not responsible for damages caused during
transportation, misuse, damage or destruction of the equipment due to
adverse weather conditions.
1.2 Safety of the operating environment
Do not use the device in an industrial environment or outside environment!
Do not expose the appliance to:
- sources of excessive heat or open flame,
- dripping or splashing water,
- vibration and excessive mechanical stress,
- insects, animals and plants,
- aggressive and chemical substances.
The operating environment of the device must always be in accordance with
the basic characteristics set out.
Features of the operating environment:
1. Ambient temperature: +5 ÷ +40 ° C
2. Humidity: 5 ÷ 85%
3. Altitude: ≤ 2 000 m
4. Occurrence of water: intermittent condensation of water or occurrence of water
vapor
5. Occurrence of foreign bodies: quantity and type of dust are insignificant
6. Protection degree: min. IP20 (device protected from touching dangerous parts
by hand and non-waterproof)
This degree of protection is not indicated on the product and on the technical
parameters in the operating instructions.
If the protection class of the product is different from IPX0, this information
is then displayed on the label of the appliance or in the technical data of the
operating instructions.
Other characteristics of the domestic operating environment (mechanical
stress - vibrations and vibrations, occurrence of plant, animals, weather effects
...) are negligible in terms of effect on the correct and safe use of electrical
equipment.
4EN
1.3 Electrical safety
Before connecting the appliance to the power supply for the first time, make
sure that the voltage on the appliance label corresponds to that of the
household electrical outlet.
The electric appliance is designed to power from 1 / N / PE ~ 230 V 50 Hz.
The electrical safety of the appliance is guaranteed only if it is properly
connected to the mains.
Electrical protection class I equipment is equipped with a protection against
electric shock by means of protective earthing of inanimate parts, which can
become dangerous when the device is malfunctioning. Always connect such
devices to properly installed mains sockets that are equipped with earthing
conductors and have a properly grounded earthing conductor.
All electrical equipment is equipped with a three-wire power supply.
Class II electrical equipment is protected against electric shock by double
insulation or by enhanced insulation of hazardous live electrical parts. Device
of protection class II it must not be equipped with means to connect protective
earthing.
All electrical equipment is equipped with two-wire power supply.
Class III electrical equipment is a device that is powered by a small safe
voltage source (battery or accumulator) and does not present any danger to
the user from electrical shock.
In order to provide increased safety against the risk of electric shock due to
the use of electrical appliances by laypersons, it is recommended to install the
power supply circuit for sockets with a rated current not exceeding 20 A RCD
with a rated operating current not exceeding 30 mA.
To ensure the safety and correctness of the electrical installation, consult a
qualified electrician.
Only use a power cord with a plug (mains lead) supplied with the device and
compatible with a wall socket. Using another cable may result in fire or electric
shock.
Always connect an electrical appliance to an easily accessible mains socket. In
the event of an operating fault, the appliance must be switched off as soon as
possible and disconnected from mains supply.
The power cord and mains plug must always be easily accessible for safe
disconnection of the electrical appliance from the power supply.
Do not pull off the power cord by pulling the cable. Disconnect the power cord
by pulling the plug behind the power cord plug.
If you use an extension cord, make sure that the total rated power of all
devices connected to the extension cord does not exceed the max. current
load on the extension cable.
If you need to use an extension cord or power supply block, make sure that
the extension cord or power pack is plugged into a power socket, and not to
another extension cord or power supply. The extension power cord or power
supply block must be designed for grounded electrical plugs and connected to
a properly grounded electrical socket.
The power plug of the appliance must be compatible with the mains socket.
Never use any adapters or modify the socket in any other way. Do not use
inappropriate or damaged drawers!
To avoid electrical shock, plug the power cables into properly grounded
electrical sockets. If the device is equipped with a 3-pole plug, do not use
adapters that do not have a grounding element or remove the grounding
element from the plug or adapter.
Do not bend, crush or otherwise expose the power cord of the appliance to
mechanical stress or external heat sources. Damage to the power cord may
result in electric shock.
5EN
When the power cord is damaged, disconnect the appliance from the mains
and do not use it again.
If the power cord is damaged, it must be replaced by the manufacturer, its
service department or a similarly qualified person to avoid the risk of electric
shock.
Regularly check and maintain the electrical appliance as well as the power
cord and power socket. Disconnect the power plug regularly and clean it if
necessary. Pollution by dust or other substances may cause disruption of the
insulating state and consequently fire.
Do not expose the appliance to water or moisture. The ingress of water into the
appliance increases the risk of electric shock.
If the power cord is wet or the water has penetrated the water, disconnect it
immediately from the mains. If the appliance is plugged into a mains socket
and if possible, turn off the power circuit before attempting
unplug the power. If you are pulling wet wires from a live power source, be very
careful.
If the electrical equipment is installed (connecting) the protective covers are
dismantled, the electrical parts must not be accessible to the user when the
installation is finished.
1.4 Safety of persons
This appliance is intended for use and operation by persons without
electrotechnical qualification - lay people, according to the instructions
specified by the manufacturer.
Device operation includes activities such as switching on and off, user
manipulation and setting of operating parameters, visual or auditory inspection
of the equipment, and user cleaning and maintenance.
This appliance can be used by children under the age of 8 and persons with
reduced physical, sensory or mental capabilities or lack of experience or
knowledge when supervised or instructed to use the appliance safely and
understand the dangers involved.
Children may not play with the appliance.
Cleaning and maintenance for users may not be performed by children
unattended.
Always keep the appliance out of reach of children during use and operation.
Be sure to download the appliance even for a freely accessible power cord.
Always be careful when operating the electric appliance! Do not use an electric
appliance if you are overly tired, under the influence of medication or narcotic
drugs that reduce attention and focus.
Inattention during operation may result in serious injury.
6EN
1.5 Cleaning, maintenance and repairs
Observe the normal user cleaning and maintenance of the appliance in
the recommended way. Do not use solvents or harsh cleaners for cleaning.
Pollution and visible stains from finger contact, respectively. The hands can
be cleaned using detergent detergents specially designed to clean household
appliances.
If you do not use the appliance, clean it or disconnect the appliance from the
power supply when the appliance is faulty.
Electrical appliances that are cleaned after use and are not intended to be
completely or partly immersed in water or other liquid, protect against the
effects of dripping and / or splashing water and before immersion.
Electric household appliances, like all other technical devices, are subject to
the surrounding environment and natural wear. Since the legal framework of
regular maintenance is not laid down for lay-in electrical household appliances,
the manufacturer recommends that the user have the appliance checked and
cleaned at least once a year by a specialist workshop.
By doing so, it is possible to achieve safety, operational reliability and
increased service life.
Do not disassemble the electric appliance! The appliance works with a
dangerous voltage. For this reason, always switch off the appliance and
disconnect it from the mains supply during user maintenance. In the event of a
fault, please have the repair serviced by an authorized service center.
Before calling a service:
1. Verify that you are unable to remedy the malfunction yourself according to
the procedure described in the chapter „Remedy of operating faults“.
2. Turn the appliance off and on to make sure the fault reappears.
3. If the malfunction of the appliance still persists after these operations, call
the nearest specialist service center.
Never repair the electric appliance yourself!
Unauthorized, unqualified and improper use of an electric appliance may result
in electric shock or other serious injury.
Only carry out the warranty or post-warranty repair of an electrical appliance to
an authorized qualified person (*).
(*) Competent qualified expert: the sales department of the manufacturer or importer or the person
qualified and authorized to carry out this type of activity with the ability to avoid all risks.
7EN
Special safety instructions. Read carefully!
The electrical equipment is designed and manufactured in such a way as to
allow safe operation and use by persons without professional qualifications.
Despite all the measures taken by the manufacturer for safe use, operation
and use carry certain residual risks and the possible dangers associated with
them.
The following symbols and their meanings have been used on the device and
in the accompanying documentation to warn of possible dangers:
This symbol alerts users to the fact that the device operates on
hazardous electrical voltage. Do not remove the protective covers on
the device.
Failure to observe the safety instructions for the use and operation of
the device may result in:
Danger of electric shock!
Danger of serious injury or death!
This symbol alerts users to the risk of serious injury or death if the
safety instructions for the use and operation of the device are not
observed!
Danger of equipment damage or other property damage!
This symbol means that the product is made with double insulation
between hazardous live parts (parts with dangerous mains voltage) and
parts that are accessible during normal use.
Transport/Carrying
Only transport / carry the device after a thorough inspection of the area and
the route, which must be unobstructed.
Never carry the device while it is in operation. Do not carry the device while it
is connected to the mains.
When carrying, make sure that your hands and the device are not wet or
slippery. Danger of serious injury or death!
Danger of damaging the device!
Unpacking/Packaging
Before putting the device into operation, unpack the device and dispose of
all its parts and accessories with residues of packaging materials, etiquettes
and tags. Keep all packaging materials in a safe place or keep them out of the
reach of children and incompetent persons.
Danger of serious injuries! Danger of suffocation!
Inspection/Commissioning
Never use the device if it is incomplete, damaged or any part of it has been
damaged during use. Have the device repaired by a specialist garage.
Danger of serious injuries!
Children under the age of 3 must be denied access to the facility unless they
are permanently supervised.
Children under the age of 3 and under 8 must not plug, regulate or clean or
maintain the appliance by the user.
8EN
Caution!
Pay special attention if vulnerable people or children are present.
The device may be used by children from 8 years of age and the elderly
with reduced physical, sensory or mental abilities or lack of experience and
knowledge, provided they are supervised or instructed in the safe use of the
device and understand the potential hazards. Children must not play with the
device. Cleaning and maintenance that can be performed by the user must not
be performed by children without supervision. Keep the device and its mains
cord out of the reach of less than 8 years of age when it is plugged in or cold.
Do not use the device in an industrial environment. This is not a professional
device.
Before connecting the device to the mains, make sure that the rated voltage
indicated on the type plate of the device corresponds to the voltage in your
socket.
Only connect the device to a properly grounded socket.
Do not leave the device unattended when it is connected to the mains.
For DC power mode, the device must be powered by the cable with the car
cigarette lighter connector supplied with the device. Make sure that the supply
voltage corresponds to the parameters indicated on the device
(DC 12 V).
If your hands are wet or damp, do not touch the device that is connected to an
electrical socket.
There is a risk of damage to the device or other property damage!
There is a risk of electric shock!
Danger of serious injuries!
Always unplug the device before switching it off for a short time or after use.
There is a risk of damage to the device or other property damage! Danger of
burns!
The device must not be used if it has fallen on the ground, showing visible
signs of damage.
Make sure that the power cord does not come into contact with water or a
warm surface.
Do not unplug the device by pulling on the power cord. This may damage the
power cord or power outlet. Unplug the power cord by pulling on the plug of the
power cord.
If the power cord is damaged, have it replaced by a qualified service center. It
is forbidden to use the device with a damaged mains cable or mains plug.
Do not use extension cords or adapters with the device.
If you notice anything unnatural, such as a burn odor, turn off the machine and
unplug it.
To avoid the risk of electric shock, do not repair or modify the device yourself.
Have all repairs carried out by an authorized service center. By interfering
with the product, you run the risk of losing the legal right from incorrect
performance, or quality guarantees. There is a risk of damage to the device or
other property damage! There is a risk of electric shock!
Danger of electrical short circuit!
9EN
Location/Installation
The device must be used and stored on a stable surface.
Always make sure that the place where you want to place the device has
sufficient space, stability, mechanical strength.
Warning!
Do not place the device:
- on uneven and unstable surfaces,
- close to heat sources (oven, etc.).
Do not partially cover the device. Do not block air inlets or outlets with linen,
clothing, curtains, or the like.
Do not place any objects on the device.
Do not place liquid containers on the device.
Do not hang other objects on the device.
Do not climb, sit, or lean on the device, or place heavy objects on it.
Do not expose the device to rain.
Keep the ventilation grille of the device free of obstructions (minimum distance
10 cm).
Store food in its original packaging or other suitable container.
Do not store explosive substances such as batteries, spray cans with
flammable substances in the device.
Do not use the device in a poorly ventilated area. Heat buildup and malfunction
may occur. Proper ventilation is important to protect the equipment from
overheating.
Warning!
Do not allow children to manipulate (play with) the device. The device can
tip over and cause very serious injuries. Mechanical damage (cracking or
breaking of parts and covers) of the device can cause serious injuries.
Danger of very serious injuries!
There is a risk of damage to the device or other property damage!
Always keep the device under supervision during use and operation!
This unit is not intended to be operated by a programmer, external timer or
remote control, as there is a risk of fire if the unit is covered or incorrectly
positioned.
Do not leave the device unattended during operation, especially if there are
children, incompetent persons or animals near them.
In normal use, always connect the device to the mains socket first and then
switch it on with the main switch - regulator.
When you have finished using the device, switch it off with the main switch -
regulator and then pull the mains plug out of the mains socket.
10EN
Warning!
The electrical socket and power cord must remain easily accessible for safe
disconnection of the device from the mains.
Never leave the device unattended and freely accessible with a free-hanging
power cord. Children, incompetent persons or animals could pull the device by
the power cord.
If you use the device where pets are kept, be careful not to get it wet or gnaw
into the cable of the electrical device.
Do not store the device with the power cord wrapped around its body. „Fold the
power cord“ loosely in the way it was folded in the original packaging from the
manufacturer.
Do not damage, reshape, bend, pull, twist the power cord, or use it if it is
tangled. Also, do not place heavy objects on the power cord or puncture it.
Do not immerse the device, the mains cord and the plug in water or other
liquids to prevent damage or electric shock. Protect the device from direct
contact with water or other liquids.
If the device will not be used for a long time, pull the mains plug out of the
mains socket.
Cleaning/Maintenance
Cleaning the outside of the device:
Before cleaning, make sure that the power cord is unplugged.
Do not use metal objects, petrol, thinners or abrasive cleaners, etc. for
cleaning to avoid damaging the surface.
To prevent possible electric shock, do not wash the device under running
water, spray water on it, or immerse it in water or any other liquid.
Danger of serious injuries!
There is a risk of electric shock!
Danger of electrical short circuit!
11EN
Description of parts
1. refrigerator body
2. top cover with electrical parts
3. connectors and switches
4. folding handle
Control panel - connectors and switches
1
2
3
4
red
LED
green
LED
mode
switch
mode
options
12 V connector
power supply
230 V co-
nnector
power supply
12EN
Characteristic properties
Thermoelectric mini fridge and heating device will provide you
with cold drinks on hot summer days and hot food in winter on the
slope.
Whether you go hiking or stuck in traffic jam, you can enjoy a
range of drinks and meals at the right temperature.
• This universal device is light and can be carried with the folding
handle.
• The ability to supply both AC and DC voltage allows the device to
be used almost anywhere.
• The device is ideal especially for students, for storing cold and
hot drinks and food in their own room.
When used in a hotel room, office or living room, its elegant
design, attractive appearance, style, comfort and exceptional
features will give you a feeling of satisfaction and comfort.
• The device combines two functions - cooling and heating. This
allows the use of electrical circuits without a compressor or freon.
Thanks to this, it is friendly to the air and the environment, it has
small dimensions, low weight, excellent mobility, long life and very
low energy consumption.
• The device is made of high-quality and health-friendly materials.
Usage options:
• arranging celebrations on the shores of the lake
• on picnics or camping trips
• for taxi drivers
• in student dormitories or kitchens
• on children‘s playgrounds
• in offices or on a construction site
• while traveling by car
• on yachts or fishing
• in train cars, lorries or when traveling by bus
• for storing fresh milk and hot meals
• as a home bar
13EN
Before first use
Do not connect the device to the mains or to the car power supply
during preparation.
Unpack the device and remove all packing material. To remove any
dirt from the device that may have formed during the packaging
process, clean it with a dry, lint-free cloth.
(See „Cleaning and Maintenance“ in this manual.) Do not immerse
the machine in water!
Clean the surface with a cloth dampened in water. Then dry the
device thoroughly.
Never immerse the device in water or any other liquid!
For home use only!
Preparation
Location
Unplug the device before placing it.
Then place it on a flat and firm surface so that the device is firmly in
place.
Operating characteristics
To achieve the optimal cooling effect, we recommend placing
pre-cooled food and drinks in the device.
The device is not intended for heating cold food, but for storing
already heated food.
Heating can be up to approx. 55 °C.
14EN
Operation
1. First, make sure that the HOT / OFF / COLD switch on the control
panel is set to OFF, then connect the device to the power. You can
use mains power (AC 230 V ~) or car power (DC 12 V).
Power supply in the car
Use the supplied car power cord. Connect the cable end to be
connected to the device to the 12 V connector on the device
and the other cable end to for the cigarette lighter and car power
connector, connect to the car connector.
Set the mode switch from the center
OFF position to the HOT or COLD
position.
Power supply
Use the supplied power cord for mains power.
Plug the end of the power cord to be connected to the device into
the 220 V - 240 V connector on the device, and plug the other
end of the power cord into an electrical socket with the specified
voltage.
Set the mode switch from the center
OFF position to the HOT or COLD
position.
15EN
Cooling:
Set the mode switch to the cooling position (COLD - lower
position).
The green indicator (bottom) lights up to indicate that the unit is in
cooling mode.
ECO mode:
In ECO mode, the temperature will be automatically regulated to
consume as little electricity as possible (but it will not be possible
to reach the lowest temperature).
Heating:
Set the mode switch to the heating position (HOT - upper
position).
The red indicator (top) lights up, indicating that the device is in
heating mode.
ECO mode:
In ECO mode, the temperature will be automatically regulated to
consume as little electricity as possible (but it will not be possible
to reach the highest temperature).
Notifications!
The heater is designed to maintain the temperature of only
preheated food and beverages. It is not intended for heating cold
objects / food or for storing open containers or liquids.
After use, turn the switch to the OFF position and unplug it.
Empty the contents, clean them and store them in a cool, dry
place.
DO NOT switch the unit between cooling and heating modes.
Turn off the unit and wait at least 30 minutes before switching to
the new mode.
2. After use, turn off the unit by setting the cooling / heating mode
switch to the center OFF position.
3. Disconnect the device from the power supply (from the car
connector or from the mains).
16EN
Cleaning and maintenance
Before each cleaning, first unplug the device and let it cool down.
• Use only a slightly damp cloth to clean the device itself.
• Do not use any solvents or harsh cleaners.
• Do not wash the device in the dishwasher.
Warning!
Never immerse the device in water or any other liquid!
Wipe the device and the power cord / power cord with a dry cloth.
After use, keep the device open to allow the smell of stored food
to escape.
After using the device, always check that there are no drinks or
food left in it.
The device does not require any other maintenance. There is no
work on or in the device that the user should do. In case
malfunction or visible damage to the device, contact customer
service.
Do not wrap any cord around the cord during storage
.
17EN
Technical specifications
Power supply: 220 - 240 V~ 50 Hz,
DC voltage 12 V
Power consumption: 55 W max.
Internal volume: 20 liters
Dimensions (w x h x d): 38 x 40,5 x 25 cm
Weight: 3,2 kg
Noise: 56 dB (A)
The declared noise emission value of this device is 56 dB (A), which
represents the sound power level A with respect to the reference
sound power of 1 pW.
Accessories:
power cord (1,8 m) 1x
car cable at 12 V (2 m) 1x
We reserve the right to make changes!
18EN
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
The symbol on the product or on its packaging indicates that this product does not belong
to household waste. It is necessary to take it to a collection point for electrical recycling
and electronic equipment.
By ensuring proper disposal of this product, you will help prevent negative consequences
to the environment and human health that would otherwise be caused by inappropriate
disposal of this product. For more detailed information about recycling of this product,
please contact your local authority, your household waste disposal service or the shop
where you purchased the product.
This product meets all the essential requirements of the EU directives that apply to it.
Producer:
Importer:
ORAVA retail 1, a.s.
Seberíniho 2
821 03 Bratislava
Slovenská republika
ORAVA distribution CZ, s.r.o.
Ostravská 494
739 25 Sviadnov
Česká republika
ORAVA retail 1, a.s.
Seberíniho 2
821 03 Bratislava
Slovenská republika
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

Orava TF-200 User manual

Category
Kitchen & houseware accessories
Type
User manual

Orava TF-200 is an excellent choice for cooling or heating food and beverages. TF-200 is designed to make your life easier and more enjoyable. It is suitable for home and similar indoor use without special focus, such as in shops, offices, economic buildings, hotels, motels, and bed and breakfast establishments.

The device has an ambient temperature range of +5 to +40 °C, a humidity range of 5 to 85%, and an altitude limit of 2,000 meters. It also has a protection degree of IP20, which means it is protected from touching dangerous parts by hand and is non-waterproof.

To ensure the safety and correctness of the electrical installation, it is recommended to consult a qualified electrician. Only use the power cord with a plug (mains lead) supplied with the device and compatible with a wall socket. Always connect an electrical appliance to an easily accessible mains socket.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI