VMI Portaprompt Manual

Welcome to the Portaprompt iPad prompter.

It is incredibly easy to use and rig, so here are some easy to follow images to show how to install it.

Take out the main unit.

Do NOT undo any of the screws. Everything can be easily assembled with finger power and not needing any tools.

Use the carbon-fibre rods to support your iPad as per the images below. You will need the full length to fit an iPad

Pro or adjust to fit a 10” regular iPad.

Use the steel rods to fit to your camera 15mm bars support system. Adjust the height of the device with the

thumbscrew.