Aqua Creek Products F-031473EZ User manual

F-031473EZ
Brand
Aqua Creek Products
Model
F-031473EZ
Type
User manual

Aqua Creek Products F-031473EZ is an extension anchor designed for use with pool lifts. It allows for easy installation of a pool lift on a pool deck, ensuring safety and convenience for users. The extension anchor can be adjusted to fit different pool deck heights and positions, making it suitable for a variety of pool setups. The anchor is designed to be perpendicular to the pool wall, with the lift end positioned between 12" and 38" from the wall for optimal clearance.

Aqua Creek Products F-031473EZ is an extension anchor designed for use with pool lifts. It allows for easy installation of a pool lift on a pool deck, ensuring safety and convenience for users. The extension anchor can be adjusted to fit different pool deck heights and positions, making it suitable for a variety of pool setups. The anchor is designed to be perpendicular to the pool wall, with the lift end positioned between 12" and 38" from the wall for optimal clearance.

MANDATORY
LEAVE THIS MANUAL WITH OWNER
Read and follow all instructions.
Lift safety can only be ensured if the lift is
installed and operated according to these
instructions.
• FOR SAFETY REASONS
• NEVER
swim alone
• NEVER
use the lift with a dry pool
• NEVER
apply direct water pressure to the electronics
• NEVER
permit children to play on or around the lift
• DO NOT
allow children to use the lift without adult
supervision
READ CAREFULLY
Check entire box and all packing
materials for parts. Before beginning
assembly, read the instructions and
identify parts using the figures and
parts listed in this document.
It is critical that all parts be carefully
inspected prior to installation. If any
damage occurred in transit, Aqua Creek
Products, LLC must be notified within
three days of receipt of unit.
Proper installation cannot be
overstressed, as an improper
installation voids Aqua Creek’s warranty
and may affect the safety of the user.
EZ ANCHOR - EXTENSION - 30.00"
F-031473EZ
30.48cm
12"
MIN.
[96.52cm]
38"
MAX.
FOR REFERENCE ONLY
[106.68cm] 42" MINIMUM
[172.72cm] 68" MAXIMUM
76.20cm
30"
EXISTING ANCHOR
POOL DECK
EDGE OF POOL
INSERT THE EZ EXTENSION ANCHOR INTO THE EXISTING
ANCHOR LOCATION ON THE POOL DECK. THE EXTENSION
ANCHOR NEEDS TO BE RUNNING PERPENDICULAR, OR WITHIN
TEN (10) DEGREES EITHER WAY, TO THE POOL WALL. THE
CENTER OF THE LIFT END OF THE ANCHOR NEEDS TO BE
BETWEEN 12" AND 38" FROM THE POOL WALL IN ORDER FOR THE
LIFT TO CLEAR THE WALL AND PLACE THE OCCUPANT INTO THE
WATER. ONCE THE EXTENSION ANCHOR IS IN POSITION, ADJUST
THE PRESSURE FOOT DOWN UNTIL IT IS RESTING ON THE DECK
AND THE EXTENSION ANCHOR IS LEVEL WITH THE POOL DECK.
LEVELING FOOT
10°
MAX.
10°
MAX.
EDGE OF POOL
INSERT THE EZ POOL LIFT INTO THE EZ
EXTENSION ANCHOR. CONFIRM THE
ANCHOR IS SETBACK 12" TO 38" FOR
WALL CLEARANCE. THE EXTENSION
ANCHOR IS DESIGNED FOR BEST USE
WHEN SLING SEAT IS IN LINE WITH THE
ANCHOR. BE SURE TO ALWAYS LOAD AND
UNLOAD TO AND FROM THE SLING SEAT
WHILE THE SLING IS IN LINE WITH THE
EXTENSION ANCHOR. SEE DIAGRAM -
LEFT
4/1/2022 10:11:54 AM PAGE - 2
EZ ANCHOR - EXTENSION - 30.00"
F-031473EZ
  • Page 1 1
  • Page 2 2

Aqua Creek Products F-031473EZ User manual

F-031473EZ
Brand
Aqua Creek Products
Model
F-031473EZ
Type
User manual

Aqua Creek Products F-031473EZ is an extension anchor designed for use with pool lifts. It allows for easy installation of a pool lift on a pool deck, ensuring safety and convenience for users. The extension anchor can be adjusted to fit different pool deck heights and positions, making it suitable for a variety of pool setups. The anchor is designed to be perpendicular to the pool wall, with the lift end positioned between 12" and 38" from the wall for optimal clearance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents